Corsair K63 WIRELESS GAMING KEYBOARD
CONGRATULATIONS
Bluetooth wireless is best for everyday computing tasks, productivity and office applications.
- Initiate Bluetooth pairing on your Bluetooth 4.0 or higher enabled device.
- Toggle power switch to turn on the keyboard.
- Hold FN + F6 until status LED indicator blinks blue.
- Follow the instructions to successfully connect your device.
The K57 RGB WIRELESS has two Bluetooth keys (F6 and F7) allowing you to remember and easily switch between two Bluetooth host devices
BEFORE FIRST USE
The K63 wireless keyboard must be fully charged before its first use.
EXTENDING BATTERY LIFE
Reducing brightness to low (33%) will provide up to 25 hours of battery life. Increased brightness levels will use more power and reduce battery life.
LOW POWER MODES
The keyboard will turn off the backlighting after 15 minutes and go to sleep which will greatly extend battery life. This setting can be adjusted or disabled via the iCUE software (corsair.com/downloads). When the battery level is critical, the backlighting will automatically turn off to ensure continued usage, and will return once the keyboard is recharged
CHARGING THE KEYBOARD
Connect the K63 wireless keyboard to an available USB 3.0 or USB 3.1 (Type-A) port on your PC with
the USB charging/data cable. The keyboard’s power LED indicator will begin pulsing green to denote
battery charging and will turn solid green when charging is complete.
WARNING: Connecting to a USB 2.0 port could result in reduced charging speed or connection issues. The power LED indicator will briefly blink a color corresponding to the battery charge level when first turned on and will turn red when charging is required. The battery has no “memory effect” and should not be completely discharged before recharging to ensure it will last for hundreds of charge/ discharge cycles.
NOTE: Reducing brightness, unplugging power when charged, and not leaving the battery discharged for long periods of time will help to maximize battery life.*
Connect the K63 wireless keyboard to an available USB 3.0 or USB 3.1 (Type-A) port on your PC with
the USB charging/data cable. The keyboard’s power LED indicator will begin pulsing green to denotebattery charging and will turn solid green when charging is complete.
WARNING: Connecting to a USB 2.0 port could result in reduced charging speed or connection issues. The power LED indicator will briefly blink a color corresponding to the battery charge level when first turned on and will turn red when charging is required. The battery has no “memory effect” and should not be completely discharged before recharging to ensure it will last for hundreds of charge/ discharge cycles.
NOTE: Reducing brightness, unplugging power when charged, and not leaving the battery discharged for long periods of time will help to maximize battery life.*
- Turn on your computer and K63 wireless keyboard.
- Connect the USB wireless receiver to an available USB 2.0 or USB 3.0 port on your PC and press FN + F9 on the keyboard.
- The wireless LED indicator on the keyboard will turn solid white when automatically connected.
NOTE: If the connection isn’t automatic, initiate pairing mode in the iCUE software and hold FN + F9 on the keyboard until the wireless LED indicator rapidly blinks white. For the best 2.4 GHz wireless performance, move the USB wireless receiver closer to the keyboard either by plugging it into a front panel USB port on your PC or by connecting it to the USB charging/ data cable via the USB cable adapter.
Contact Us
- WEB: corsair.com
- PHONE: (888) 222-4346
- SUPPORT: support.corsair.com
- BLOG: corsair.com/blog
- FORUM: forum.corsair.com
- YOUTUBE: youtube.com/corsairhowto
© 2020 CORSAIR MEMORY, Inc. All rights reserved. CORSAIR and the sails logo are registered trademarks in the United States and/or other countries. All other trademarks are the property of their respective owners. Product may vary slightly from those pictured. 49-002296 AB
Download Link
