Pheanoo-D6-Soundbar-System-Featured-image

Pheanoo D6 Soundbar System User Manual

Pheanoo-logo

Pheanoo D6 Soundbar System User ManualPheanoo D6 Soundbar System image 1

Mount on the wall

WARNING: If you don’t feel confident to correctly and securely wall-mount the sound bar, Seek the assistance of an experienced person of professional.Install the speaker on a vertical, fast, reinforced area of wall.  For optimum performance, allow at least 25mm/1’’distance between the sound bar and the TV.

Pheanoo D6 Soundbar System image 2

Setting the Sound bar

  • Plug the power cord in and the LED will light up.
  •  Press the BLUETOOTH/OPTICAL/AUX/HDMI(ARC) button on the remote control to switch the input mode The indicator can change into 5 different colors, representing different input mode:

Blue: in Bluetooth mode

Green: in AUX mode

Pink: in USB mode

Cyan: in HDMI(ARC) mode

  • When indicator light on, press INDICATOR button to turn off; when the indicator light off, press any button on the remote control to turn on it.

Powering On/Off

  1.  Plug the power cord of the soundbar into a wall outlet, it will automatically enter standby mode;
  2.  Press the STANDBY button on the soundbar or POWER button on the remote control to turn the soundbar on. Make your selection of the desired input modes by pressing the BLUETOOTH /OPTICAL/AUX/HDMI(ARC) button on the remote control or the standby button on the soundbar.
  3.  To turn off, press and hold the STANDBY button or POWER button on remote control for about 2 seconds, the soundbar will enter standby mode, and then unplug it from the wall outlet.

Pheanoo D6 Soundbar System image 3Important Safety Instruction

WarningPheanoo D6 Soundbar System image 4

Caution:
To reduce the risk of electric shock, do not dismantle the product and do not expose the apparatus to rain or moisture. No user-serviceable parts inside. Refer servicing to qualified personnel only The lightning flash within an equilateral triangle is intended to alert you to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute an electric shock to a person or persons. Important! This symbol alerts you to read and observe important warnings and instructions on the unit or in this manual.

Notice:
This appliance is not intended for use by persons (including children) with reduced physical sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.

  1. To prevent possible hearing damage, do not listen at high volume levels for long time periods or a sudden high volume level.
  2.  Never use the device unsupervised! Switch off the device whenever you are not using it, even if not using it only for a short while.
  3.  The appliance is not intended to be operated by means of an external timer or separate remote control system.
  4.  If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
  5.  Before operating this system, check the voltage of this system to see if it is identical to the voltage of your local power supply.

Playing Audio via BT Connection

  1.  Use either the buttons on the SoundBar or the “BLUETOOTH” button on the remote to activate BT mode.A Blue LED indicator will indicate that BT mode has been selected.
  2.  Activate the pairing function on your phone of other compatible device and select“ D6 ”
  3.  When successfully paired, you will hear a tone and the LED will stay on
  4.  The remote control includes BT mode playback controls .

Notes:

  •  If your Pairing device Switched off or Manual disconnected, the sound bar will automatically enter pairing mode
  •  If the connected device is switched off or manual disconnected, the sound bar will automatically enter pairing successfully connected device will be re-established once you re-enter wireless range(10 meters). to connect to other devices, repeat the above pairing steps
  •  There is no automatic shutdown in pairing mode. The sound bar will remain in pairing mode even if no device is paired, so switch off if not in use

Pheanoo D6 Soundbar System image 5
Audio input(Aux)Connection

  1.  Use either the buttons on the SoundBar or the “AUX” button on the remote to activate AUX mode.A green LED indicator will indicate that AUX mode has been selected.
  2. .Playback functions (play/pause, tracks, pair) cannot be adjusted through the SoundBar remote when in AUX mode. Others playback functions can be controlled from the buttons on the SoundBar.

Pheanoo D6 Soundbar System image 6

Important Safety Instructions

  1. Read these instructions. Keep these instructions. Follow all instructions. Heed all warnings.
  2.  Do not use this apparatus near water.
  3. Clean only with dry cloth.
  4.  Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
  5.  Do not install near any heat sources such as radiators, heaters, stoves, or other apparatus (including amplifiers) that produce heat.
  6.  Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles or at the point where they exit from the apparatus.
  7.  Only use attachments/accessories specified by the manufacturer.
  8. Unplug this apparatus during lightning storms or when unused for long periods of time.
  9.  Refer all servicing to qualified service personal. Servicing is required when the apparatus has been damage in any way, for example, when the power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
  10. The AC plug is used to disconnect the device, the disconnected device should remain readily operable. In order to disconnect the apparatus from the AC power completely, the AC plug must be removed from the AC outlet completely.

Unpacking and Set Up

  • Remove the Sound bar from the carton and remove all packing material from the Sound bar. Save the packing material, if possible, in case the Sound bar ever needs to be serviced or transported. The original carton and packing material is the only safe way to pack your Sound bar to protect i from damage in transit.
  • Remove any descriptive labels or stickers on the front or top of the cabinet. Do not remove any labels or stickers from the back or bottom of the cabinet.
  • Place your Sound bar on a level surface such as a table, desk or shelf, convenient to an AC outlet,out of direct sunlight, and away from sources of excess heat, dirt, dust, moisture, humidity, or vibration.
  • Unwind the Line cord connecting the AC adapter and extend it to its full length.

Protect Your Furniture 

This model is equipped with non-skid rubber ‘feet’ to prevent the product from moving when you operate the controls. These ‘feet’ are made from non-migrating rubber material specially formulated to avoid leaving any marks or stains on your furniture. However certain types of oil based furniture polishes, wood preservatives, or cleaning sprays may cause the rubber ‘feet’ to soften, and leave marks or a rubber residue on the furniture. To prevent any damage to your furniture we strongly recommend that you purchase small self-adhesive felt pads, available at hardware stores and home improvement center everywhere, and apply these pads to the bottom of the rubber ‘feet’ before you place the unit.

Power Source

This sound bar is designed to operate on normal AC Power source. For Europe, it works only under SMPS 110V-240V ~50hz/60Hz. Do not attempt to operate the Sound bar on any other power source. You could cause damage to the Sound bar that is not covered by your warranty.

Play Dolby Digital Plus via Optical

Use this operating mode to play music from the optical digital input for example from a TV on your soundbar . The TV must have an optical digital output. Use the optical cable supplied to make the connection. Proceed as follows:

  • Connect the optical cable to the optical digital output of your TV.
  • Then connect the optical cable to the optical digital input of your soundbar.
  •  Start playing on the TV.
  • Press the OPTICAL button on the remote control to select OPTICAL mode
  •  You can use the volume buttons to adjust the volume to your requirements. • If you wish, you can change the audio settings using the relevant buttons on the remote control

Note

  • When connecting a device such as a TV/Set-top box/ DVD/ game console with optical cable, set the audio output mode of the device to Dolby or Auto mode (digital optical output)..

Play Dolby Digital Plus via HDMI

  1.  The soundbar supports HDMI (ARC) with audio return channel (ARC). You can hear the TV audio through your soundbar by using a single HDMI cable. But on condition that your TV is ARC compliant.
  2.  Using a high speed HDMI cable, connect the HDMI (ARC) connector on the soundbar to the HDMI (ARC) connector on the TV. The HDMI (ARC) connector on the TV might be labeled differently. For details, see the user manual of your TV.
  3. Press “HDMI(ARC)” button on the remote control or “STANDBY” button on soundbar to select HDMI (ARC) mode. Different TV might be different setting, please refer to your TV USER MANUAL.
  4. Use the volume buttons to adjust the volume to your requirements.
  5.  You can also change the audio settings by using the relevant buttons on the remote control.
  6.  When HDMI (ARC) is connected, TV sound setting in “sound output” mode should be set as <external Dolby or Auto mode>, in addition, digital audio output mode should be set as <automatic> or <decoded output as Dolby>. When the HDMI (ARC) cable is connected, the TV digital audio output is set as Dolby or Auto mode. Then start playing music on the TV.

Important Notes

  • This sound bar was especially developed for LED/LCD/Plasma TV’s: It should not be used in combination with CRTTV’s (Cathode Ray Tube TV’s) in order to avoid image interference.
  •  Safety and operating instruction manual should be retained for future reference.
  • The apparatus should not be exposed to dripping, splashing or placed in a humid atmosphere such as a bathroom.

SpecificationsPheanoo D6 Soundbar System image 7

  1.  When connecting a device such as a TV/Set-top box/DVD/ game console with HDMI (ARC) cable, set the audio output mode of the device to Dolby or Auto mode <digital HDMI (ARC) output>.
  2. but the operation approach is the same. 3. If needs to connect TV box meanwhile, please firstly connect the HDMI (ARC) connector and paired to the soundbar. Then connect the TV box
  3.  If needs to connect TV box meanwhile, please firstly connect the HDMI (ARC) connector and paired to the soundbar. Then connect the TV box

Pheanoo D6 Soundbar System image 8TROUBLE SHOOTINGPheanoo D6 Soundbar System image 9Soundbar accessories

Pheanoo D6 Soundbar System image 10 Overview of the Sound Bar main unitPheanoo D6 Soundbar System image 11

  1.  LED Display
  2. AUX
  3. OPTICAL
  4.  HDMI(ARC)
  5. USB(For urgrade only)
  6.  DC IN
  7. SW OUTPUT
  8.  Standby
  9.  VOL-
  10. VOL+

Remote Control

Pheanoo-D6-Soundbar-System-image-1

Soundbar assembly details

  1. Plug the audio connector into the audio input port on another main unit
  2.  Align the arrows on the two stickers
  3.  Twist clockwise about 20 degrees until locks securely

Pheanoo D6 Soundbar System image 16

FCC Warning

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.  This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. Note: The Grantee is not responsible for any changes or modifications not expressly approved by the party responsible for compliance. such modifications could void the user’s authority to operate the equipment. The device has been evaluated to meet general RF exposure requirement. To maintain compliance with FCC’s RF exposure guidelines, the distance must be at least 20 cm between the radiator and your body, and fully supported by the operating and installation configurations of the transmitter and its antenna(s). IC Warning This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

DOWNLOAD LINK

Pheanoo D6 Soundbar System User

https://pheanoo.com/index.html

Leave a Reply