Kogan da Vinci 1.0 3D Printer User Manual
Product Manual
Overview
- This guide provides details on how to start off your da Vinci 1.0 3D printer correctly. Before you can begin printing, there are some easy procedures you need to become familiar with:
- How to open the box safely
- How to load filament
- Getting to know XYZware software
Important Safety Instruction
- Do not place the printer in humid or dusty environments such as bathrooms and high traffic areas.
- Do not place the printer on a rickety surface and/or inclined position. Printer may fall down or tumble and it may cause serious injury.
- Do not touch the interior of the printer while printing, as it may be hot and include moving parts. Please keep the front door closed during printing to avoid injury.
Open the box
Install Cartridge
Load filament
Sample print
Note: Please always complete the procedure for “FILAMENT UNLOADING” before changing a new cartridge. Never cut off the filament from the extruder to prevent the extruder from clogged.
Unload filament
Maintenance Tools
Important Safety Instruction
The maintenance tools provided should only be handled by an adult. Please keep the tools away from children. Incorrect handling or maintenance of the printer may cause damage to the product or personal injury.
Information and usage of the advanced maintenance tools
Specifications
Know about XYZware
Print Bed Adjustment Instructions
This print bed has been calibrated by our professional technician before shipment. Do not make adjustments yourself, or contact our Technical Consultant.
Print bed adjustment flow chart
Print bed adjustment steps
Reminder
If the value shown is always 999,999,999. follow the steps below to clean.
- Clean the surface of the print head using the copper brush. (Clean the contact point between the print head and print bed)
- Wipe and clean the measurement points in reference with Figure 4.
- Perform the calibration process again.
Service Code Informations
For further information and instruction of the service code, please refer to XYZprinting website (http://support.xyzprinting.com/) or contact service center for help.
Note
Please retain all original packaging material and please ship your product with the original packaging for warranty purpose. Shipping without original packaging material may cause product damaged during the shipment and may cause chargeable service fees.
DOWNLOAD PDF LINK
https://www.kogan.com/au/blog/now-everyone-can-own-3d-printer-under-1000/
