Eufy Dog Training Collar Device User Manual

Eufy Dog Training Collar Device User Manual

IMPORTANT SAFETY

• Your dog must be at least 6 months old to use this product.
• Never use this product to reduce or stop aggressive behavior. Consult a professional trainer instead.
• Wearing a collar that is too tight or for a long time (more than 12 hours a day) might damage your dog’s skin.

PRODUCT OVERVIEW

1. LED Indicator
2. Power Button:
   • Press and hold for 1 second to power on.
   • Press and hold for 3 seconds to power off.
3. Connectors
4. Charging Port (with cover)

1. Display: Shows dog channel, shock level, and battery level.
2. Beep Button
3. Vibration Button
4. Shock Button
5. Mode Switch
   • Beep, vibrate, and shock
   • Beep and vibrate
   • Power of
6. Shock Level + / –
7. Dog Channel Switch

CHARGING

Charge the collar for 4 hours before first use:

Charge the remote controller:

WEARING COLLAR

FOR YOUR DOG

Make sure both connectors properly contact the neck. Add the provided connector extensions if necessary.

To verify the shock works properly, use the provided shock testing tool. Press the Shock button and check the light. It will get brighter as you increase the shock level and darker as you decrease the shock level.

TRAINING YOUR DOG

Button	Mode Switch	When Pressed
		The collar plays a beep sound.
		The collar vibrates.   *The vibration will stop automatically if you hold the button for more than 10 seconds.
		The collar delivers an electric shock to the dog, ranging from level 1 to 16. *The electric shock will stop automatically if you hold the button for more than 10 seconds.

Find an appropriate shock level.

• Always start with the lowest level.
• The appropriate shock level can be found when your dog responds to the shock with a mild reaction, such as tensing the muscles in the neck.
• The shock level also varies depending on the training you deliver. For training that requires high concentrations, your dog might need a shock of a higher level.

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Warning:
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and the receiver.
3. Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
4. Consult the dealer or an experienced radio/ TV technician for help.

Declaration of Conformity

Hereby, Anker Innovations Limited declares that the product type T8790 is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. For the declaration of conformity, visit the Web site: https://uk.eufylife.com/. The adapter shall be installed near the equipment and shall be easily accessible. Do not use the Device in the environment at too high or too low temperature, never expose the Device to strong sunshine or a too wet environment. The suitable temperature for the product and accessories is -20°C to 60°C. When charging, please place the device in an environment that has normal room temperature and good ventilation. It is recommended to charge the device in an environment with a temperature that ranges from 5°C~25°C.

CUSTOMER SERVICE 

Warranty
12-month limited warranty

Call Us
United States
+1 (800) 988 7973 Mon-Fri 9 AM-5 PM (PT)

United Kingdom
+44 (0) 1604 936 200 Mon-Fri 6AM-11AM (GMT)

Germany
+49 (0) 69 9579 7960 Mon-Fri 6:00-11:00

Email Us
Customer Support: support@eufylife.com

Anker Innovations Limited
Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong Kong

REFERENCE LINK

https://support.eufy.com/s/article/eufy-Dog-Training-Collar-Device-Introduction

DOWNLOAD PDF

Eufy Dog Training Collar Device User Manual