Turtle Beach Ear Force X42 Quick Start Guide
IMPORTANT INSTRUCTIONS
For the full user guide, please go to www.turtlebeach.com/products/X42
Package Contents
X42 Headset Controls
More details are found in the full user guide, available for download at: www.turtlebeach.com/products/X42
www.turtlebeach.com/products/X42
More details are found in the full user guide, available for download at: www.turtlebeach.com/products/X42
Setup – Headset
Xbox 360 Slim
Xbox 360 (Older Models)
Pairing the Headset to the Transmitter
In order to play audio, the X42 headset must be “paired” (linked) to its transmitter. The headset and transmitter are paired out of the box. The instructions below are only necessary if pairing appears to have been lost.
Step 1: Headset should be powered OFF. (Hold Power button for 3 seconds.)
Step 2: Press and hold the Pair button on the transmitter for 5 seconds until the transmitter’s Power/Link LED flashes rapidly. Release.
Step 3: Press and hold the headset’s Power button for 6 seconds until you hear the second double-beep, then release. The headset LED will flash rapidly (twice per second).
Step 4: Within 30 seconds, the transmitter Power/Link LED will remain on solid, and the headset Power light will blink steadily once per second, indicating that pairing was successful.
Xbox 360 Configuration
- Press the silver Xbox Guide button on your Xbox 360 controller.
- Go to Settings > System Settings > Console
- Settings > Audio > Digital Output.
- Set Digital Output to “Dolby Digital 5.1”.
- Press the silver Xbox Guide button on your Xbox 360 controller. Go to Settings > Preferences > Voice.
- Set Voice Volume to “10”.
- Set Game Volume to “10”.
- Set Voice Output to “Play Through Headset”.
DOWNLOAD PDF LINK
https://support.turtlebeach.com/s/article/219023758-X42-User-Guide-Quick-Start-Guide?language=en_US
