You are currently viewing EDIFIER MF200 Portable Speaker User Manual

EDIFIER MF200 Portable Speaker User Manual

Edifier logo

EDIFIER MF200 Portable Speaker Manual

EDIFIER MF200 Portable Speaker Product image

Important safety instruction

  • Please read the instructions carefully. Keep it in a safe place for future reference.
  • Use only accessories approved by the manufacturer.
  • Using the product in a 0-35°C environment is recommended. Shipping and storing the product in a 0-35°C environment is recommended.
  • To reduce the risk of fire and electric shock, do not expose the product to rain or moisture.
  • Do not use this product near water. Do not immerse the product in any liquid or have it exposed to dripping or splashing.
  • Do not install or use this product near any heat source (e.g. radiator, heater, stove, or other devices that generate heat).
  • Do not place any object filled with liquids, such as vases on the product; neither should any open fire, such as lighted candles be placed on the product.
  • Do not block any ventilation openings. Do not insert any object into ventilation openings or slots. It may cause fire or electric shock.
  • Keep sufficient clearance around the product to maintain good ventilation (a minimum of 5cm is recommended).
  • Do not force a plug into the jack. Before connection, check for blockage in the jack and whether the plug matches the jack and is oriented in the right direction.

Warning

  • Keep the provided accessories and parts (such as screws) away from children to prevent them from being swallowed by mistake.
  • Do not open or remove the housing yourself. It may expose you to dangerous voltage or other hazardous risks. Regardless of the cause of the damage (such as damaged wire or plug, exposure to liquid splash or foreign object falling in, exposure to rain or moisture, product not working or being dropped, etc.), the repair has to be performed by an authorized service professional immediately.
  • Before cleaning the product with a dry cloth, always turn off the product and disconnect the power plug first.
  • Never use strong acids, alkalis, gasoline, alcohol, or other chemical solvents to clean the product surface. Use only neutral solvent or clear water for cleaning.
  • The product must be used at an altitude of lower than 2000m.

Battery-powered products:

The danger of explosion if the battery is incorrectly replaced. Replace only with the same or equivalent type. Never disassemble, hit with force, squeeze batteries, or dispose of batteries in a fire. Do not expose batteries to conductive materials, liquid, fire, or heat. Do not let metal objects contact two battery poles. If the battery looks swollen, leaking, discolored, odor, or has any abnormal appearance, stop using it.

Do not use the battery after being immersed in water. Improper use of the battery may lead to explosion or leakage, causing skin burns or other injuries; in the event of battery leakage, handle it with care and immediately dispose of the battery in a manner in compliance with applicable laws and regulations in your locality. The battery subjected to extremely low air pressure may result in an explosion or the leakage of flammable liquid or gas.

For wireless products:

  • Wireless products may generate shortwave radio frequencies and interfere with the normal use of other electronic devices or medical equipment.
  • Turn off the product when it’s disallowed. Do not use the product in medical facilities, on airplanes, at gas stations, near automatic gates, automatic fire alarm systems,s or other automated devices.
  • Do not use the product in the vicinity of a pacemaker within a 20cm range. Radio waves may affect the normal operation of the pacemaker or other medical devices.

What’s in the Box

EDIFIER MF200 Portable Speaker FIG 1

EDIFIER MF200 Portable Speaker FIG 2

Specifications

  • Power output… 4W+4W
  • Frequency response… 100Hz-20KHz
  • Input… 5V 1A

Declaration for EU

  • Frequency Band… 2.402GHz ~ 2.480GHz
  • RF Power Output… ≤10 dBm (EIRP)
    There is no restriction on the use

Note:

  • Images are for illustrative purposes only and may differ from the actual product.
  • For the need for technical improvement and system upgrade, the information and specifications contained herein may be slightly different from the actual product. If any difference is found, the actual product prevails.

Functional Operation

EDIFIER MF200 Portable Speaker FIG 3

 

Power on/off

  • Press and hold… power on/off
  • Press… input mode switch
  • Double press… battery level lookup

Mode indicator

  • Red… USB audio streaming input (for connecting to computers)
  • Blue… Bluetooth input
  • Green… AUX input

Volume up +

  • Tap… volume up
  • Press and hold… next track (Bluetooth/USB audio streaming mode)

Volume down –

  • Tap… volume down
  • Press and hold… previous track (Bluetooth/USB audio streaming mode)

Play/pause

  • Tap… play/pause music (Bluetooth/USB audio streaming mode)
  • mute/unmute (AUX mode)
  • Press and hold… disconnect Bluetooth and clear pairing records (Bluetooth connected)

USB port

Charging indicator

  • Charging… red LED steady lit
  • Fully charged… red LED off

AUX port

Operating Instructions

EDIFIER MF200 Portable Speaker FIG 4

Charge

  1. When hearing a low battery prompt tone, please charge the speaker.
  2. If the speaker is not used for a long time, it’s better to charge it once every three months to extend the battery life

USB audio streaming connection

  1. Insert the USB cable from the speaker into the USB port on a computer.
  2. It will switch to USB audio streaming mode when the speaker is powered on.
  3. After the computer auto-installs the USB audio streaming driver, the speaker is ready to use.

AUX connection

Select the audio file on your device to play, the speaker is ready to use.

Bluetooth connection

EDIFIER MF200 Portable Speaker FIG 5

  1. Blue LED will blink rapidly.
  2. Select “EDIFIER MF200” in your device setting to connect. Blue LED will be steady lit after connected.

EDIFIER MF200 Portable Speaker FIG 6

Troubleshooting

No sound

  • Check if the speaker is ON.
  • Try to turn up the volume using the volume control.
  • Ensure the audio cables are firmly connected and the input is set correctly on the speaker.
  • Check if there is a signal output from the audio source.

Cannot connect via Bluetooth

  • Make sure the speaker is switched to Bluetooth input. If it is in other audio input modes, Bluetooth will not connect.
  • The effective Bluetooth transmission range is 10 meters; please ensure that operation is within that range.

Noise coming from speakers

  • To learn more about EDIFIER, please visit www.edifier.com For EDIFIER warranty queries, please visit the relevant country page on www.edifier.com and review the section titled Warranty Terms. USA and Canada: service@edifier.ca

REFERENCE LINK

https://www.edifier.com/product-mf200.html

DOWNLOAD PDF

2022061513464216552720025659_compressed

Leave a Reply