Epomaker EK68 VIA ISO USB JSON File Keyboard User Manual

Epomaker EK68 VIA ISO USB JSON File Keyboard User Manual

BASIC FUNCTION

• FN + 1 F1
• FN + 2 F2
• FN + 3 F3
• FN + 4 F4
• FN + 5 F5
• FN + 6 F6
• FN + 7 F7
• FN + 8 F8
• FN + 9 F9
• FN + 0 F10
• FN + – F11
• FN + = F12
• FN + ESC
• FN + I PrtSc
• FN + O ScrLk
• FN + P Pause
• FN + DEL Insert
• FN + PGUP Home
• FN + PGDN End
• FN + WIN Win Lock

LIGHT EFFECTS

• FN + ENTER Turn On/Off Backlights
• FN + \| Toggle RGB Effects
• FN + [{ Backlights Speed –
• FN + ]} Backlights Speed +
• FN + → Hue +
• FN + ← Hue –
• FN + ;: Saturation +
• FN + ’” Saturation –
• FN + ↓ Backlights Brightness –
• FN + ↑ Backlights Brightness +

FUNCTION KEY COMBINATIONS

• FN+BACKSPACE (HOLD 3S) Reset the Keyboard
• FN + Q Short Press to Switch to BT1; Long Press to Pair Devices
• FN + W Short Press to Switch to BT2; Long Press to Pair Devices
• FN + E Short Press to Switch to BT3 Long Press to Pair Devices
• FN + R Short Press to Switch to 2.4G Mode; Long Press to Pair Devices
• FN + B Battery Check

PAIRING BLUETOOTH

Toggle the switch to make sure that the keyboard is under Bluetooth mode:

1. Hold Fn+Q/W/E for 3-5 seconds till the indicators flash fast in red/green/blue, and the keyboard is ready to pair.
2. Turn on your Bluetooth device and find ‘Epomaker EK68-1/2/3’, then connect. When the keyboard is connected to the Bluetooth device, the indicator light stops flashing and stays on, the connection is done.
3. Press Fn+Q/W/E to toggle between the Bluetooth devices 1/2/3.

PAIRING WIRELESS 2.4GHZ

1. Toggle the switch to 2.4G mode (the indicator flashes white when entering to the 2.4G mode), the keyboard is ready to pair.
2. Insert the 2.4G dongle into your device, the indicator stops flashing white and the connection is done.
3. Reconnect 2.4G mode: Hold Fn+R for 3-5 seconds till the light flashes white, and the keyboard is ready to pair.

WIRED MODE
Toggle the switch to the wired mode, and the keyboard enters the wired mode successfully.

BATTERY CHECK
Hold Fn+B, and the keys from 1! to 0) light up to show the battery percentage; for example, if the keys from 1! to 6^ light up when holding Fn+B, it means that the battery life is currently 60%; if the keys of 1! -0) light up, battery life is 100%.

HOW TO USE VIA:

Please visit “https://github.com/WestBerryVIA/via-releases/releases” to download the latest VIA application for your computer’s OS. Turn on the button “Use V2 definitions (deprecated).

Import the JSON File to VIA
For the EK68 ANSI version
If the keyboard is under the wired mode: download Epomaker EK68 ANSI wired JSON file via https://epomaker.com/blogs/qmk-via/epomaker-ek68-ansi-usb-via-json and load the file; If the keyboard is under 2.4G mode, download Epomaker EK68 ANSI 2.4G JSON file via https://epomaker.com/blogs/qmk-via/epomaker-ek68-ansi-24g-via-json and load the file.

For the EK68 ISO version
If the keyboard is under the wired mode: download Epomaker EK68 ISO wired JSON file via https://epomaker.com/blogs/qmk-via/epomaker-ek68-iso-usb-via-json and load the file; If the keyboard is under 2.4G mode, download Epomaker EK68 ISO 2.4G JSON file via https://epomaker.com/blogs/qmk-via/epomaker-ek68-iso-24g-via-json and load the file.

When the loading is completed, the “Configure” Tab displays the layout and programmable functions.

SPECS

• MODEL: EPOMAKER EK68 VIA
• KEYS AMOUNT: 67 Keys + 1 knob
• CASE MATERIAL: ABS Plastic
• STABILIZER TYPE: Plate-mounted
• PCB TYPE: 3/5-pin Hotswap PCB
• CONNECTIVITY: Type-C Wired
• ANTI-GHOST KEY: NKRO
• POLLING RATE: 1000hz under Wired and 2.4G Mode;
• 125hz under Bluetooth Mode
• BATTERY CAPACITY: 3000mAh
• COMPATIBILITY: WINDOWS/MAC
• DIMENSION: 325 x 117 x 41 mm
• WEIGHT: Around 0.8kg

REPLACING KEYCAPS AND SWITCHES
For a full guide on how to remove keycaps and switches scan the QR Code or type in your browser: https://epomaker.com/blogs/guides/diy-guide-how-to-remove-and-replace-your-mechanical-keyboard-switches

Install Switches

1. Check that all the switch metallic pins are perfectly straight and clean.
2. Align the switch vertically to have the Gateron logo facing north. The pins should align themselves to the keyboard PBC.
3. Press the switch down until you hear a click. This means your switch clips have attached themselves to the keyboard plate.
4. Inspect the switch to ensure it’s properly attached to your keyboard, and test it.

Remove Switches

1. Grab your Switch Removal Tool and align the gripping teeth vertically (on the Y-Axis) at the center of the switch, as shown in the example graphic above.
2. Grab the switch with the Switch Puller and apply pressure until the switch releases itself from the plate.
3. Using firm but gentle force pull the switch away from the keyboard using a vertical motion.

Note:
If the key doesn’t work its possible you may have bent one of the switches while installing it. Pull the switch out and repeat the process. Pins may be damaged beyond repair and need replacement if this process is not done correctly. Never apply excessive force when replacing keycaps or switches. If you cannot remove or install keycaps or switches please contact customer service as soon as possible to avoid damage to the keyboard due to operating errors.

TECHNICAL ASSISTANCE
For technical assistance, please email support@epomaker.com with your purchase order number and a detailed description of your issue. We normally respond to inquiries within 24 hours. If you purchased your keyboard from a distributor or not from any official store Epomaker, please contact them directly for any additional help.

C O MMUN I T Y F O R U M S
Join our community and learn together with other keyboard enthusiasts.

• https://discord.gg/2q3Z7C2
• https://www.reddit.com/r/Epomaker/

WARRANTY

EPOMAKER’s Warranty covers any factory defects that might affect the proper functionality of your purchase. It doesn’t cover any damage that may occur from normal wear and tear. If your product is defective we will send you a replacement unit. Replacement units might require you to send the defective unit back to Epomaker. We provide a 1-year warranty for our products when bought from our website (EPOMAKER.com). Your item will not be covered by your 1-year warranty if the inspection shows any sign of modification or changes unsupported by the original product, these include: Changing internal components, Assembling and reassembling the product, Replacing Batteries, etc. We will ONLY cover the item if it is bought from our official stores. You do not have a warranty with us if you bought the item from another reseller or likewise. Please contact the store that you bought your product from to resolve issues.

REFERENCE LINK

https://epomaker.com/blogs/qmk-via/epomaker-ek68-iso-usb-via-json

DOWNLOAD PDF

Epomaker EK68 VIA ISO USB JSON File Keyboard User Manual