Epomaker EK 75 Programmable Keyboard Quick Start Guide
- MODEL: EPOMAKER TH100
- SIZE: 374 x 126.7 × 32.96mm
- NKRO: Yes
- SYSTEM: Windows / Mac
- EPOMAKER TH100
- WEIGHT: 1.67kg
- HOTSWAP: YES
- KEYCAPS: PC
- LAYOUT: 100Keys
- CONNECTION: USB-C, 2.4GHz Bluetooth 3.0, Bluetooth 5.0.
WINDOWS SHORTCUTS
- FN+F1 Multimedia
- FN+F2 Volume –
- FN+F3 Volume +
- FN+F4 Mute
- FN+F5 Stop
- FN+F6 Previous track
- FN+F7 Play/Pause
- FN+F9 Email
- FN+F10 Home page
- FN+F11 Calculator
- FN+F12 Search
MACOS SHORTCUTS
- F1 Screen Brightness –
- F2 Screen Brightness +
- F3 Control Center
- F4 Sir
- F5
- F6
- FN+F8 Previous track
- F9 Next track
- F10 Mute
- F11 Volume –
- F12 Volume +
HOTKEY
- FN+TAB Toggle Win/Mac OS
- Fn+PrtSc Insert
- Fn+Home Scroll
- Fn+P PAUSE
- Fn+[ Turn on/off Backlights
- Fn+] Toggle Backlight Effects
- Fn+\| Toggle Backlight Colors
- Fn+↑ Backlight Brightness +
- Fn+↓ Backlight Brightness –
- Fn+← Backlight Speed –
- Fn+→ Backlight Speed +
- FN+Esc Long press 3s to restore the default setting.
- Fn+DEL Toggle Sidelight Effects
- Fn+B Battery Percentage（Wireless mode）
- FN+~ Swap L- CTRL & CAPS
- Fn+WIN Lock/Unlock Win Key
- Fn+1!/2@/3# Bluetooth Device 1/2/3
- FN+4$ 2.4Ghz Mode
- FN+5% Wired Mode
CHANGE RGB EFFECTS
Pressing Fn+] to switch the RGB effect of your Epomaker TH100 keyboard.
PAIRING BLUETOOTH
- Press Fn+1!/2@/3# to toggle to the Bluetooth mode and then hold Fn+1!/2@/3# for 3-5 seconds till the light flashes fast, and the keyboard is ready to pair.
- Turn on your Bluetooth device and find ‘K100Max 5.0’, then connect. When the keyboard is connected to the Bluetooth device, the 1!/2@/3# key stops flashing, and the connection is done.
- Press Fn+1!/2@/3# to toggle between the Bluetooth devices 1/2/3.
PAIRING WIRELESS 2.4GHz
- Press Fn+4$ to the 2.4Ghz mode, and then hold Fn+4$ for 3-5 seconds till the light flashes fast, and the keyboard is ready to pair.
- Insert the 2.4G dongle into your device, the 4$ key stops flashing and the connection is done.
WIRED MODE
Press Fn+5% till the key light up, and the keyboard enters the wired mode.
REPLACING KEYCAPS AND SWITCHES
For a full guide on how to remove keycaps and switches scan the QR Code or type in your browser: https://epomaker.com/blogs/guides/diy-guide-how-to-remove-and-replace-your-mechanical-keyboard-switches
Install Switches
- Check that all the switch metallic pins are perfectly straight and clean.
- Align the switch vertically to have the Gateron logo facing north. The pins should align themselves to the keyboard PBC.
- Press the switch down until you hear a click. This means your switch clips have attached themselves to the keyboard plate.
- Inspect the switch to ensure it’s properly attached to your keyboard, and test it.
Remove Switches
- Grab your Switch Removal Tool and align the gripping teeth vertically (on the Y-Axis) at the center of the switch, as shown in the example graphic above.
- Grab the switch with the Switch Puller and apply pressure until the switch releases itself from the plate.
- Using firm but gentle force pull the switch away from the keyboard using a vertical motion.
Note:
If the key doesn’t work its possible you may have bent one of the switches while installing it. Pull the switch out and repeat the process. Pins may be damaged beyond repair and need replacement if this process is not done correctly. Never apply excessive force when replacing keycaps or switches. If you cannot remove or install keycaps or switches please contact customer service as soon as possible to avoid damage to the keyboard due to operating errors.
TECHNICAL ASSISTANCE
For technical assistance, please email to support@epomaker.com with your purchase order number and a detailed description of your issue. We normally respond to inquiries within 24 hours. If you purchased your keyboard from a distributor or not from any official store Epomaker, please contact them directly for any additional help.
WARRANTY
EPOMAKER’s Warranty covers any factory defects that might affect the proper functionality of your purchase. It doesn’t cover any damage that may occur from normal wear and tear. If your product is defective we will send you a replacement unit. Replacement units might require you to send the defective unit back to Epomaker. We provide a 1-year warranty for our products when bought from our website (EPOMAKER.com). Your item will not be covered by your 1-year warranty if the inspection shows any sign of modification or changes unsupported by the original product, these include: Changing internal components, Assembling and reassembling the product, Replacing Batteries, etc. We will ONLY cover the item if it is bought from our official stores. You do not have a warranty with us if you bought the item from another reseller or likewise. Please contact the store that you bought your product from to resolve issues.
