EpoMaker Everglide Lite 75 Gaming Keyboard
SHORTCUTS
BACKLIGHT SETTINGS 
CONNECTION
CHANGE RGB EFFECTS
Pressing Fn+INS to switch the RGB effect of your Everglide 75% keyboard kit
PAIRING BLUETOOTH
Turn on the switch on the back of the keyboard to make sure that the keyboard is under the wireless mode:
Holding Fn+1/2/3 for 3-5 seconds till the backlight flashes fast, the keyboard is ready to pair.
Press Fn+1/2/3 to toggle between the bluetooth devices 1/2/3.
PAIRING WIRELESS 2.4GHz
Switch to the 2.4G mode at the back of the keyboard.
Insert the USB dongle, the connection will be completed.
PRODUCT SPECIFICATIONS
REPLACING KEYCAPS AND SWITCHES
For a full guide on how to remove keycaps and switches scan the QR Code or type in your browser:
https://epomaker.com/blogs/guides/diy-guide-how-to-remove-and-replace-your-mechanical-keyboard-switches.
Before installing switches, be sure the pins are clean and straight.
Remove Switches
- Grab your Switch Removal Tool and align the gripping teeth vertically (on the Y-Axis) at the center of the switch, as shown in
the example graphic above. - Grab the switch with the Switch Puller and apply pressure until the switch releases itself from the plate.
- Using firm but gentle force pull the switch away from the keyboard using a vertical motion.
Push Straight Down
Please be gentle. Be sure the pins are aligned with the slots.
Mechanical Switch
Example of a switch as seen from top after you remove the keycap to prepare for switch removal.
The Switch Puller tool aligns Vertically to the Switch to unclip the plastic securing the switch to the plate.
Install Switches
- Check that all the switch metallic pins are perfectly straight and clean.
- Align the switch vertically to have the Gateron logo facing north. The pins should align themselves to the keyboard PBC.
- Press the switch down until you hear a click. This means your switch clips have attached themselves to the keyboard plate.
- Inspect the switch to ensure it’s properly attached to your keyboard, and test it.
Note: If the key doesn’t work its possible you may have bent one of the switches while installing it. Pull the switch out and repeat the process.
Pins may be damaged beyond repair and need replacement if this process is not done correctly. Never apply excessive force when replacing keycaps or switches. If you cannot remove or install keycaps or switches please contact customer service as soon as possible to avoid damage to the keyboard due to operating errors.
TECHNICAL ASSISTANCE
For technical assistance, please email to support@epomaker.com with your purchase order number and a detailed description of your issue. We normally respond to enquiries within 24 hours. If you purchased your keyboard from a distributor or not from any official store of Epomaker, please contact them directly for any additional help.
COMMUNITY FORUMS
Join our community and learn together with other keyboard enthusiasts.
https://www.reddit.com/user/epomaker/
WARRANTY
EPOMAKER’s Warranty covers any factory defects that might affect the proper functionality of your purchase. It doesn’t cover any damage that may occur from normal wear and tear. If your product is defective we will send you a replacement unit. Replacement units might require you to send the defective unit back to Epomaker. We provide a 1 year warranty for our products when bought from our website (EPOMAKER.com). Your item will not be covered by your 1 year warranty if the inspection shows any sign of modification or changes unsupported by the original product, these include: Changing internal components, Assembling and reassembling the product, Replacing Batteries, etc. We will ONLY cover the item if it is bought from our official stores. You do not have a warranty with us if you bought the item from another reseller or likewise. Please contact the the store that you bought your product from to resolve issues.
Download Pdf Link
https://epomaker.com/cdn/shop/files/KW75_manual.pdf?v=14428635475585798011
