Epomaker TH80 X Gasket Mechanical Keyboard User Manual
WINDOWS SHORTCUTS
- FN + F1 Screen Brightness –
- FN + F2 Screen Brightness +
- FN + F3 Task
- FN + F4 Explorer
- FN + F5 Mail
- FN + F6 My Computer
- FN + F7 Previous Track
- FN + F8 Play/Pause
- FN + F9 Next Track
- FN + F10 Mute
- FN + F11 Volume –
- FN + F12 Volume +
- FN + U Insert
- FN + I Home
- FN + O End
- FN + J PrtSc
- FN + K Scroll Lock
- FN + L Pause
- FN + WIN Lock/Unlock Win Key
MACOS SHORTCUTS
- F1 Screen Brightness –
- F2 Screen Brightness +
- F3 Task
- F4 Search
- F5 Mic
- F6 Sleep
- F7 Previous Track
- F8 Play/Pause
- F9 Next Track
- F10 Mute
- F11 Volume –
- F12 Volume +
- FN + J Insert
- FN + K Home
- FN + L End
LIGHT EFFECTS
- FN + BACKSPACE Turn On/Off Backlights
- FN + \| Toggle RGB Effects
- FN + P Toggle RGB Colors
- FN + ↓ Backlights Brightness –
- FN + ↑ Backlights Brightness +
- FN + ← Backlights Speed –
- FN + → Backlights Speed +
FUNCTION KEY COMBINATIONS
- FN+ESC (HOLD 3S) Reset the Keyboard
- FN + 1 Short Press to Switch to BT1; Long Press to Pair Devices
- FN + 2 Short Press to Switch to BT2; Long Press to Pair Devices
- FN + 3 Short Press to Switch to BT3; Long Press to Pair Devices
- FN + 4 Short Press to Switch to 2.4G Mode; Long Press to Pair Devices
- FN + 5 Wired Mode
- FN + KNOB Enter / Exit the Knob-Screen Interaction
PAIRING BLUETOOTH
Turn on the switch on the back of the keyboard to make sure that the keyboard is under wireless mode:
- Hold Fn+Q/W/E for 3-5 seconds till the indicators flash fast in red/blue/yellow, and the keyboard is ready to pair.
- Turn on your Bluetooth device and find ‘Acrylic68’, then connect. When the keyboard is connected to the Bluetooth device, the light on the Q/W/E key stops flashing and the connection is done.
- Press Fn+Q/W/E to toggle between the Bluetooth devices 1/2/3.
PAIRING WIRELESS 2.4GHZ
- Press Fn+R to the 2.4Ghz mode, and then hold Fn+R for 3-5 seconds till the light flashes fast in green, and the keyboard is ready to pair.
- Insert the 2.4G dongle into your R device, the R key stops flashing green and the connection is done
WIRED MODE
Press Fn+T till the key lights white, and the keyboard enters the wired mode.
INTERACTION OF THE KNOB AND THE LED SCREEN
Step 1. Press Fn+Knob to set the main display on the screen. Rotate the knob among the static images, gif, or keyboard status. Step 2. Press the knob to confirm the main display and goes to the menu options. *Step 3. Rotate the knob to choose the menu among “Photo/gif”, “Lights”, “RGB Color”, “Brightness”, “Speed”, “OS Mode”, and “And layer”, press the knob to enter the menu, rotate the knob to choose among the options, press the knob again to confirm and go back to the menu. Step 4. Press Fn+knob again to exit the interaction. Rotate and press the knob resumes to volume & mute control. *Note: if the knob is not pressed or rotated in 5 seconds in Step 3, the display will go back to the main display. Press the knob again to continue Step 3.
SPECS
- MODEL: EPOMAKER TH80 X
- KEYS AMOUNT: 79 Keys
- SCREEN: LED
- STRUCTURE: Gasket-like mount
- STABILIZER TYPE: Plate-mounted
- PCB TYPE: 3/5-pin Hotswap PCB
- BATTERY CAPACITY: 4000+4000mAh
- CONNECTIVITY: Type-C Wired, 2.4 & Bluetooth Wireless
- ANTI-GHOST KEY: NKRO in all modes
- POLLING RATE: 1000hz in Type-C Wired & 2.4G modeled
- COMPATIBILITY: WINDOWS/MAC
- DIMENSION: 325 x 135 x 30 mm
- WEIGHT: Around 0.9kg
- WINDOWS/MAC
- Around 0.9kg
REPLACING KEYCAPS AND SWITCHES
For a full guide on how to remove keycaps and switches scan the QR Code or type in your browser: https://epomaker.com/blogs/guides/diy-guide-how-to-remove-and-replace-your-mechanical-keyboard-switches
Install Switches
- Check that all the switch metallic pins are perfectly straight and clean.
- Align the switch vertically to have the Gateron logo facing north. The pins should align themselves to the keyboard PBC.
- Press the switch down until you hear a click. This means your switch clips have attached themselves to the keyboard plate.
- Inspect the switch to ensure it’s properly attached to your keyboard, and test it.
Remove Switches
- Grab your Switch Removal Tool and align the gripping teeth vertically (on the Y-Axis) at the center of the switch, as shown in the example graphic above.
- Grab the switch with the Switch Puller and apply pressure until the switch releases itself from the plate.
- Using firm but gentle force pull the switch away from the keyboard using a vertical motion.
Note:
If the key doesn’t work its possible you may have bent one of the switches while installing it. Pull the switch out and repeat the process. Pins may be damaged beyond repair and need replacement if this process is not done correctly. Never apply excessive force when replacing keycaps or switches. If you cannot remove or install keycaps or switches please contact customer service as soon as possible to avoid damage to the keyboard due to operating errors.
TECHNICAL ASSISTANCE
For technical assistance, please email support@epomaker.com with your purchase order number and a detailed description of your issue. We normally respond to inquiries within 24 hours. If you purchased your keyboard from a distributor or not from any official store Epomaker, please contact them directly for any additional help.
WARRANTY
EPOMAKER’s Warranty covers any factory defects that might affect the proper functionality of your purchase. It doesn’t cover any damage that may occur from normal wear and tear. If your product is defective we will send you a replacement unit. Replacement units might require you to send the defective unit back to Epomaker. We provide a 1-year warranty for our products when bought from our website (EPOMAKER.com). Your item will not be covered by your 1-year warranty if the inspection shows any sign of modification or changes unsupported by the original product, these include: Changing internal components, Assembling and reassembling the product, Replacing Batteries, etc. We will ONLY cover the item if it is bought from our official stores. You do not have a warranty with us if you bought the item from another reseller or likewise. Please contact the store that you bought your product from to resolve issues.
