Panasonic ER-CSF1 Shaver Head User Manual

Panasonic ER-CSF1 Shaver Head User Manual

WARNING

• Do not place within reach of children or infants. Do not let them use it. Putting parts or accessories in the mouth may cause an accident or injury.

CAUTION

•  Do not use excessive pressure to apply the system outer foil to your lip or other part of your face.
•  Do not apply the system outer foil directly to blemishes or injured skin.
•  Do not touch the blade section (metallic section) of the inner blade.
•  Do not use this appliance for hair on head or any other part of the body causing injury to skin or reduce the life of the system outer foil.
• Do not forcefully press the system outer foil.

Important information

1. Apply the lubrication oil after each cleaning for it will keep the movement of the blade smooth and maintain a comfortable shave.
2.  Do not bring the system outer foil into contact with hard objects.
3. Do not drop or hit against other objects.

Parts identification

A Head

1.  Protective cap
2. System outer foil
3. Foil frame
4. System outer foil release buttons
5. Outer foil section
6. Inner blades
7. Foil frame release button

How to use

•  Clean the appliance after use.
•  Turn on the power.

Note

The use time after a full charge is as follows. ER-CBL1: 50 minutes ER-CBN1: 40 minutes Based on dry using at 20 °C – 30 °C. The operating time may differ depending on the frequency of use and the operating method.

Shaving (Fig. 3)
Apply the whole system outer foil perpendicularly against the skin and shave by slowly gliding the appliance over the face against the grain of the beard.

• The beard under the chin and around the throat can be shaved better by stretching the skin to raise the beard.
• To prevent damaging the system outer foil, do not shave with only a part of the system outer foil.

Maintenance

•  Make sure that the main body is turned off.
•  Lubricate after cleaning and store the head with the protective cap attached.

How to clean

1. Apply some hand soap and some water to the system outer foil. (Fig. 4‑1)
2.  Turn on the power and turn off the power after 20 seconds.
3. Remove the head and the outer foil section.
4.  Rinse them with running water. (Fig. 4‑2)
5.  Shake up and down several times to remove the water.
6.  Wipe off the water with a dry cloth and dry it well.

With the cleaning brush

1.  Remove the outer foil section and the inner blades.
2.  Brush off any hair trimmings from the head and the outer foil section. (Fig. 5)

•  Clean the inner blades using the brush by moving it in direction as illustrated.
•  Do not move the brush perpendicularly against the blades as it will damage the inner blades and affect their sharpness.

Removing and mounting the outer foil and the inner blades

•  Do not throw away the foil frame. Press the system outer foil release buttons  and pull down the system outer foil.
• Do not press the system outer foil release buttons with excessive force. foil, preventing complete attachment to the foil frame. Remove the inner blades one at a time. Insert the inner blades one at a time.

Replacement parts
Replacement part is available at your dealer or Service Center

Lubrication

1.  Apply one drop of lubrication oil to each of the system outer foils. (Fig. 7)
2.  Turn on the power and allow to run it for approximately 5 seconds.
3.  Turn off the power and wipe off any excess lubrication oil from the system outer foil with a soft cloth.

   Troubleshooting

DOWNLOAD PDF

Panasonic ER-CSF1 Shaver Head User Manual

REFERENCE LINK

https://www.panasonic.com/