Soundcore Flare 2 Speaker User Manual

Table of contents show

Soundcore-Flare 2-Speaker-User-manual-Image-1

Avoid dropping.
Do not disassemble.
Avoid extreme temperatures.
Do not use the product outdoors during thunderstorms. Use original or certified cables.
Do not use any corrosive cleaner/oil to clean.
Do not expose batteries to heat sources such as direct sunlight, fire and or the like.

Powering On/Off

Power on	Press
Power off	Press and hold for 2 seconds

Bluetooth Pairing

Press the Bluetooth button for 3 seconds until you hear a sound and the Bluetooth LED flashes white to indicate the secondary speaker is in connection.
When the secondary speakers are close to the primary speaker, they will connect to the primary speaker automatically. When successfully connected, the Bluetooth LED on the primary speaker will continue flashing white, while on the secondary speakers will turn.

Set up one Flare 2 as the primary speaker and connect it with more than 100+ secondary Flare 2 speakers to control audio and all the light effects.

1. Connect one Flare 2 speaker to your phone or other devices via When successfully connected, the Bluetooth LED will turn blue.
2. Press and hold the Bluetooth button on this Flare 2 for 3 seconds until you hear a sound and the Bluetooth LED flashes white to indicate this Flare 2 is the primary

Connect with secondary speakers:

you can power off, adjust the volume, or switch light effects for all speakers by controlling the primary speaker only;
you can power off or switch light effects for each secondary speaker individually;
you can’t adjust the volume for each secondary speaker individually;
to exit the Party Cast mode, press the Bluetooth button either on the primary speaker or on the primary speaker for 3 seconds until the Bluetooth LED flashes.

Light Effects

Turn on / Switch light effects X	1 Press
Turn off >	2” Press and hold for 2 seconds

Soundcore App

Download the Soundcore App for light effects, EQ settings, firmware update and more.