Foscam-FI9928P-FHD-Wireless-PTZ-Dome-IP-Camera-Feature

Foscam FI9928P FHD Wireless PTZ Dome IP Camera User Manual

Foscam logo

Foscam FI9928P FHD Wireless PTZ Dome IP Camera User Manual

Foscam-FI9928P-FHD-Wireless-PTZ-Dome-IP-Camera-Fig10

Getting Started

Package Contents

Foscam-FI9928P-FHD-Wireless-PTZ-Dome-IP-Camera-Feature

Security Tips

  • Please change the camera’s password regularly, using a combination of numbers, letters and special characters.
  • We recommend that you regularly update your camera with the latest available software and firmware to ensure the best experience with your camera.

Physical Description

Foscam-FI9928P-FHD-Wireless-PTZ-Dome-IP-Camera-Feature

The cords on this product are a potential strangulation hazard. For child safety, please keep these cords out of the reach of children.

Setting Up Your Camera: Wired Connection via the Foscam App (Recommended)

Before You Get Started

Scan the QR code below to download and install the Foscam APP.

Foscam-R4M-Super-HD-Home-Security-Camera-Feature

To ensure a smoother video experience on your smart phone, it is recommended that your smart phone meet the following specifications:
iOS: version 8.1 or higher.
Android: 4.1 or higher, using a device with a Graphics Processing
Unit (GPU).

Note: For the best experience, please update the APP to the latest version!

Wired Connection

  • Please tighten the antenna clockwise and make sure it is in a vertical position.

Foscam-FI9928P-FHD-Wireless-PTZ-Dome-IP-Camera-Feature

  • Connect the camera to your router with an Ethernet cable.
  • Plug the power adapter into the camera, and then wait for about 1 minute.
  • Make sure your smart phone is connected to the same WiFi network as the camera.

Foscam-FI9928P-FHD-Wireless-PTZ-Dome-IP-Camera-Feature

Tips: You need to connect to the 2.4GHz network if your WiFi router is dual-band—most newer routers have both 2.4GHz and 5GHz channels. For example, choose SSID: XXXXX_2.4G.

  • Open the foscam APP and please register a Foscam account, or sign in if you have one already.
  • After logging into Foscam APP, select “Tap to add a camera” or “+” icon on the upper right corner, then select “Scan the QR code” and scan the QR code that labeled at the bottom of your camera.

Foscam-FI9928P-FHD-Wireless-PTZ-Dome-IP-Camera-Feature

  • There are two options in the following steps, please pay attention to choose the corresponding adding method.
  • Please wait for a few seconds, you can tap “Configure WiFi” in “Configure WiFi” interface, then select your WiFi network and enter your WiFi’s password. After, you can set the camera name and tap “Save” in “Set name” interface.

Foscam-FI9928P-FHD-Wireless-PTZ-Dome-IP-Camera-Feature

Note: If the adding process fails, please reset your camera and try adding again according to the above method.

Foscam-FI9928P-FHD-Wireless-PTZ-Dome-IP-Camera-Feature

  • Tapping on the play button in the video box will jump to the “Camera Login” setting interface. For your security, please set a new username and password for your camera before viewing live video.

Foscam-FI9928P-FHD-Wireless-PTZ-Dome-IP-Camera-Feature

  • After completing the above steps, you can begin using your camera.
    Note: If you choose installation step 7.2, please refer to the following steps for configuring WiFi . After setting your WIFi, you can unplug your network cable and the camera works normally

Configure WiFi

If you selected “Skip” in step 7, click play to enter the camera credentials interface > Tap the “ ” button > tap “WiFi Settings” > select your WiFi network and enter your WiFi’s password. After setting up successfully, you can view live video without the Ethernet cable.

Foscam-FI9928P-FHD-Wireless-PTZ-Dome-IP-Camera-Feature

Other Ways to Access Your Camera

Foscam VMS

Foscam VMS is a new tool for PCs. It does not require plug-ins and is compatible with Windows & Mac, supporting all Foscam HD cameras and up to 36 cameras at the same time. If you would like to manage multiple cameras, we suggest you install Foscam VMS. You can download the “Foscam VMS ” Windows version from foscam.com/vms, and can download the “Foscam VMS” Mac version from the APP store: https://apps.apple.com/cn/app/foscamvms/id1521202507?mt=12

Note: For the best experience, please update Foscam VMS to the latest version!

Add the IP Camera

  • Run Foscam VMS, then create a local administrator account and login.
  • Tap the “+” icon on the Foscam VMS and follow the setup wizard to add your camera. Please visit foscam.com/downloads to view the user manual and for additional detailed steps.

Foscam-FI9928P-FHD-Wireless-PTZ-Dome-IP-Camera-Fig10

Foscam Cloud Service

You can access the camera via the Foscam Cloud website: https://www.myfoscam.com Some of the benefits of viewing your camera in the cloud:

  • It’s simple and convenient to remotely access and manage all your WiFi security cameras.
  • Enjoy the latest features first through Foscam Cloud including cloud storage and more.
  • Getting started is fast—if you have already registered an account through Foscam App, you can directly use your login credentials for Foscam Cloud.

Hardware Installation

Foscam-FI9928P-FHD-Wireless-PTZ-Dome-IP-Camera-Fig10

Fixate the camera on your preferred location and use the provided  screws to mount it.

Please Note:
Ensure that the rain or water will not reach the connector ports at the end of the pig tail wiring. These connectors are not weather-resistant.

Important Notice

Camera Username & Password

The camera username & password are used to access and manage your camera. Having a strong password can significantly improve the security of your camera. If you have forgotten either of them, please press the “Reset” button and hold it for more than 10 seconds while the camera is powered on. After release the button. The camera will automatically reboot and the default settings will be restored. The default username / password will then become admin / (blank), respectively. You can then reconnect the camera by following this Quick Setup Guide.

Foscam Cloud Service Account Username & Password

Your Foscam Cloud service account and password may be used to access both the Foscam App and the Foscam Cloud service website. Therefore, you can register your account username & password on either one.

Storage Media

Your camera supports cloud, NVR (Network Video Recorder), and Micro SD card (only supports FAT-32 format) storage formats. If you wish to record and play back large amounts of video, we recommend using a Foscam NVR device as well.

Firmware Upgrade

You can upgrade the firmware of your camera with the Foscam App by using the new “One-Key Online Upgrade” feature (Open the Foscam App and Login to the camera, select Settings > Firmware Upgrade). You also can download the latest version to upgrade your camera from our official website foscam.com/upgrades.

Safety Tips

  • Please ensure that the proper power supply is used before using the camera.
  • Please install the camera securely using the screws provided.
  • Please use this product within the temperature range. When the ambient temperature is too high or too low, it may cause product failure.
  • To avoid the risk of fre fire or electric shock, please keep your camera connectors in a cool, dry place.
  • Please keep the camera out of reach of small children.
  • This product is not a toy, ; children should use the product under under adult supervision.
  • Change your default port to a greater range to help ensure the safety of your connection. How to change the default port: please visit foscam.com/downloads to view the user manual.
  • Check the logs of your Foscam cameras frequently. Foscam Foscam
  • Cameras have embedded logs reminding telling you which IP addresses addresses are accessing the camera.

Product Performance

WLAN frequency range: 2412MHz – 2472MHz
Maximum transmission power: < 18.5dBm
Wireless Standard: IEEE802.11b/g/n (2.4GHz)
Power Supply: DC 12V 2.0A 24W

Technical Support

If you have problems with your Foscam device, please contact the the reseller you purchased from, or you can e-mail the headquarter company headquarters technical support team: support@foscam.com Your valuable comments and suggestions on improving Foscam products are welcomed!

REFRENCE LINK

https://www.foscam.eu/fi9928p.html

Leave a Reply