GAMDIAS Athena-M1 Elite Mid Tower Case User Manual

GAMDIAS Athena-M1 Elite Mid Tower Case User Manual

SPECIFICATIONS

• SERIES Mesh Series
• Product Name ATHENA M1 Elite
• Case Type MID Tower
• Dimension (L x W x H) 430 x 220 x 490 mm 16.9 x 8.6 x 19.2 inch
• Chassis Dimension (L x W x H) 370 x220 x 470 mm 14.5 x 8.6 x 18.5 inch
• Motherboard Support ATX, Micro-ATX,Mini-ITX
• Expansion Slots 7
• Material SPCC , ABS, Tempered glass
• Window Front (Mesh), Left (Tempered Glass)
• Radiator Support
  Top: 280 mm, 240mm
  Front: 360 mm , 280 mm , 240 mm
  Rear: 120mm
• Fan Support
  Top: 2 x 120mm , 2 x 140mm
  Front: 3 x 120mm , 3 x 140mm, 2 x 200mm
  Rear: 1 x 120mm
• Pre-installed Fans
  Front: 3 x 120mm ARGB Fans
  Rear: 1 x 120mm Fan
• Pre-installed Control BOX 6 Ports Hub (3 ports are used)
• Motherboard Sync 5V 3-Pin Addressable Header
• Drive Bays 2 x 3.5″ or 1 x 2.5″+1 x 3.5″(HDD Cage) 2 x 2.5″
• Clearance CPU cooler height limitation: 165mm VGA length limitation: 350mm PSU length limitation: 200mm
• I/O Port USB 3.0 x1, USB 2.0 x2, HD Audio x1, Fan LED Control x1, Fan Speed Control x1

EXPLODED VIEW PARTS

PARTS

1. Chassis Body
2. Tempered Glass Side Panel
3. Right Side Panel
4. Top Dust Filters
5. Mesh Front Panel
6. ARGB IO Port
7. 12CM ARGB FAN
8. HDD Cage
9. Rubber Foot
10. 120 MM Fan

ACCESSORY

SIDEPANEL REMOVAL

Remove the side panel

MOTHERBOARD INSTALLATION

Lay down the chassis Install the motherboard in proper location and secure it with screws.

PSUINSTALLATION

Place the PSU in the proper location

3.5″ 2.5″ HDD INSTALLATION

• A. 3.5″ HDD
• Align the HDD into the mounting holes and screw it in.
• B. 2.5″ SSD Align the SSD into the mounting holes and screw it in.

AIR COOLINGCOMPATIBILITY

• Top 120 mm x 2 or 140 mm x2
• Front 120 mm x 3 or 140 mm x2 or 200mmx2
• Rear 120 mm x 1 or 140 mm x1
• Bottom 120 mm x 2

RADIATOR COMPATIBILITY

• Top 240 mm
• Front 360 mm or 280 mm
• Rear 120 mm

I/O PORTS

1. Power Button
2. Fan Speed Control
3. Fan LED Control
4. MIC
5. Headphone
6. USB 2.0
7. USB 2.0
8. USB 3.0

Sync With Motherboard: Press and Hold the FAN Speed Control Button for 3 Seconds.
Fan LED Off: Press and Hold the FAN LED Control Button for 3 Seconds.

I/O CONNECTORS

See your motherboard’s manual for front panel header locations and pin-outs.

REFERENCE LINK

https://www.gamdias.com/en/component/case/ATHENA_M1_ELITE