GAMDIAS E1 Talos Mini Tower Pc Case User Manual

GAMDIAS E1 Talos Mini Tower Pc Case User Manual

EXPLODED VIEW PARTS

0. Chassis Body
1. Swing Door
2. Tempered Glass Left Side Panel
3. Right Side Panel
4. Top Dust Filters
5. Tempered Glass Front Panel
6. Front Panel
7. Logo Panel
8. IO Port
9. HDD Tray
10.Rubber Foot

ACCESSORY

SIDE PANEL REMOVAL

• Remove the side panel

MOTHERBOARD INSTALLATION

• Lay down the chassis
• Install the motherboard in proper location and secure it with screws

PSU INSTALLATION

• Place the PSU in proper location.

3.5″ 2.5″ HDD INSTALLATION

• A. 3.5″ HDD:
  Align the HDD into the mounting holes and screw in.
• B. 2.5″ SSD:
  Align the SSD into the mounting holes and screw in.

PCI-E/PCICARD (s)USAGE

• (Optional) Extend in stalling to Motherboard.
• PCI-E Cable Not Included.

AIR COOLING COMPATIBILITY

• Top: 120 mm x 2 or 140 mm x 2
• Front:120 mm x 2 or 140 mm x 2
• Rear: 120 mm

RADIATOR COMPATIBILITY

• Front: 240 mm or 120 mm
• Rear: 120 mm

I/O PORTS

1. Power Button
2. Fan LED Control
3. USB 2.0
4. Headphone
5. MIC
6. USB 3.0

I/O CONNECTORS

See your motherboard’s manual for front panel header locations and pin-outs.

RGB FAN CONTROLLER INSTALLATION

1. The Fan Led wiring must be connected to the fan hub in the order you want the lighting effects to be displayed.
2.  Fans must start at “1” and continue in series. 1 > 2 > 3 > 4 > 5 > 6
3.  Any fan not connected in series will break communication and the RGB lighting function will not work.
4. Mount the fan(s) to the location of your choice in the chassis.
5. Mind a location for the fan hub that allows connection for all of the fans RGB LED cables installed in your system to reach.
6. The fan controller will also need to be plugged in to the fan hub for control of the RGB LED lighting.
7. Mount the fan hub with the provided mounting strips

SPECIFICATIONS

• Dimension (L x W x H): 365 x 190 x 365 mm or 14.4 x 7.5 x 14.4 inch
• Case Type: Mini Tower
• Material(s): Tempered Glass, SPCC, ABS
• Side Panel: 4mm Tempered Glass x 2 (Left & Front)
• Motherboard Support: 6.7″ x 6.7″ (Mini ITX), 9.6″ x 9.6″ (Micro ATX)
• LOGO Light: Yellow LED
• Expansion Slots: 4
• PSU: ATX PS2

REFERENCE LINK

https://www.gamdias.com/