Table of contents
show
GAMDIAS M1 Talos Elite Gaming Case User Guide
EXPLODED VIEW PARTS
0. Chassis Body
1. Tempered Glass Side Panel
2. Right Side Panel
3. Top Dust Filters
4. Tempered Glass Front Panel
5. IO Port
6. 12 CM ARGB FAN
7. HDD Cage
8. Rubber Foot
9. 120 MM Fan
ACCESSORY
SIDE PANEL REMOVAL
- Remove the side panel
MOTHERBOARD INSTALLATION
- Lay down the chassis
- Install the motherboard in proper location and secure it with screws
PSU INSTALLATION
- Place the PSU in proper location.
3.5″ 2.5″ HDD INSTALLATION
- A. 3.5″ HDD:
Align the HDD into the mounting holes and screw in. - B. 2.5″ SSD:
Align the SSD into the mounting holes and screw in.
AIR COOLING COMPATIBILITY
- Top: 2 x 120mm or 2 x 140mm
- Front: 3 x 120mm or 3 x 140mm or 2 x 200 mm
- Rear: 1 x 120mm
RADIATOR COMPATIBILITY
- Top: 280 mm or 240 mm
- Front: 360 mm or 280 mm or 240 mm
- Rear: 120 mm
I/O PORTS
- Power Button
- Fan Speed Control
- Fan LED Control
- MIC
- Headphone
- USB 2.0
- USB 2.0
- USB 3.0
I/O CONNECTORS
See your motherboard’s manual for front panel header locations and pin-outs.
SPECIFICATIONS
- SERIES: TG Series
- Product Name: TALOS M1 Elite
- Case Type: MID Tower
- Dimension (L x W x H): 430 x 220 x 490 mm or 16.9 x 8.6 x 19.2 inch
- Chassis Dimension (L x W x H): 370 x 220 x 470 mm or 14.5 x 8.6 x 18.5 inch
- Motherboard Support: ATX, Micro-ATX,Mini-ITX
- Expansion Slots: 7
- Material: SPCC , ABS , Tempered glass
- Window: Front & Left (Tempered Glass)
- Pre-installed Control BOX: 6 Ports Hub (3 ports are used)
- Motherboard Sync: 5V 3-Pin Addressable Header
