GAMDIAS M2 Mars RGB Micro-Tower Chassis User Guide

GAMDIAS M2 Mars RGB Micro-Tower Chassis User Guide

EXPLODED VIEW PARTS

0. Chassis Body
1. 120mm ARGB Fan
2. Tempered Glass Side Panel
3. Right Side Panel
4. Top Dust Filters
5. Steel Front Panel
6. Mesh
7. IO Port
8. HDD Cage
9. Rubber Foot

ACCESSORY

SIDE PANEL REMOVAL

• Remove the side panel

MOTHERBOARD INSTALLATION

• Lay down the chassis
• Install the motherboard in proper location and secure it with screws۔

PSU INSTALLATION

• Place the PSU in proper location.

3.5″ 2.5″ HDD INSTALLATION

• A. 3.5″ HDD:
  Align the HDD into the mounting holes and screw in.
• B. 2.5″ SSD:
  Align the SSD into the mounting holes and screw in.

AIR COOLING COMPATIBILITY

• Top: 2 x 120mm or 2 x 140mm
• Front:  3 x 120mm or 3 x 140mm or  2 x 200 mm
• Rear: 1 x 120mm

RADIATOR COMPATIBILITY

• Top:  280 mm or 240 mm
• Front: 360 mm or 280 mm  or 240 mm
• Rear: 120 mm

I/O PORTS

1. Power Button
2. LED Control
3. USB 3.1 Type-C
4. USB 3.0
5. USB 3.0
6. Mic
7. Headphone

I/O CONNECTORS

See your motherboard’s manual for front panel header locations and pin-outs.

SPECIFICATIONS

• SERIES: Aluminum / Steel Series
• Product Name: MARS M2
• Case Type: MICRO Tower
• Dimension (L x W x H): 397 x 210 x 425 mm or 15.6 x 8.3 x 16.7 inch
• Chassis Dimension (L x W x H): 360 x 210 x 405 mm or 14.2 x 8.3 x 15.9 inch
• Motherboard Support: ITX, micro ATX
• Expansion Slots: 4
• Material: SPCC , ABS , Tempered glass , Steel
• Window: Left
• Pre-installed Control BOX: 6 Ports Hub (1 port is used)
• Motherboard Sync: 5V 3-Pin Addressable Header
• Drive Bays: 2 x 3.5″ or 1 x 2.5″+1 x 3.5″ or 2 x 2.5″(HDD Cage) 2 x 2.5

REFERENCE LINK

https://www.gamdias.com/