GAMDIAS TALOS-P1A Tempered Glass RGB Mid-Tower Guide

GAMDIAS TALOS-P1A Tempered Glass RGB Mid-Tower Guide

SPECIFICATIONS

• Dimensions (H xWx D ) 481 x 215 x 550 mm 18.9 x 8.5 x 21.7 inch
• Case Type  MID Tower
• Material(s)  Tempered Glass, SPCC, ABS
• Side Panel 4mm Tempered Glass x 4 (Left & Right & Front & Top)
• Motherboard Support: 6.7″ x 6.7″ (Mini ITX), 9.6″ x 9.6″ (Micro ATX),
  12″ x 9.6″ (ATX),
  12″ x 13″(E-ATX)
• LOGO Light Yellow LED
• Panel Light Rainbow Color RGB
• IO Port USB3.0 x 2, USB2.0 x 2, Mic, Headphone, Fan LED Control, Speed Controller
• Expansion Slots  7 + 2
• Drive Bays 2 x 3.5″ or 2 x 2.5″(HDD Cage) 2 x 2.5″
• Radiator Support
  Front: 1 x 360mm, 1 x 280mm
  Top: 1 x 360mm, 1 x 280mm
  Rear: 1 x 120mm
• Fan Support
  Front: 3 x 120mm, 2 x 140mm
  Top: 3 x 120mm, 2 x 140mm
  Rear: 1 x 120mm
• PSU ATX PS2
• Clearance CPU cooler height limitation: 170mm VGA length limitation: 380mm PSU length limitation: 180mm

EXPLODED VIEW PARTS

PARTS

1. Chassis Body
2. Swing Door
3. Tempered Glass Side Panel
4. Tempered Glass Top Panel
5. Tempered Glass Front Panel
6. Top Panel
7. Front Panel
8. IO Port
9. Logo Panel
10. HDD Tray
11. Rubber Foot

ACCESSORY

SIDEPANEL REMOVAL

Remove the side panel

MOTHERBOARD INSTALLATION

Lay down the chassis Install the motherboard in the proper location and secure it with screws.

PSUINSTALLATION

Place the PSU in the proper location

3.5″ 2.5″ HDD INSTALLATION

• A. 3.5″ HDD
• Align the HDD into the mounting holes and screw it in.
• B. 2.5″ SSD Align the SSD into the mounting holes and screw it in.

PCI-E/PCICARD (s)USAGE

(Optional) Extend in stalling to Motherboard. PCI-E Cable Not Included.

AIR COOLING COMPATIBILITY

• Top 120 mm x 3 or 140 mm x2
• Front 120 mm x 3 or 140 mm x2
• Rear 120 mm x 1

RADIATOR COMPATIBILITY 

• Top 360 mm or 280 mm
• Front 360 mm or 280 mm
• Rear 120 mm

I/O PORTS

1. Power Button
2. Speed Controller
3. Fan LED Control
4. MIC
5. Headphone
6. USB 2.0
7. USB 3.0

Switchable IO and Logo Plate

I/O CONNECTORS

See your motherboard’s manual for front panel header locations and pi-outs.

RGB FAN CONTROLLER INSTALLATION

• The fan-led wiring must be connected to the fan hub in the order you want the lighting effects to be displayed.
• Fans must start at “1” and continue in series. 1 > 2 > 3 > 4 > 5 > 6
• Any fan not connected in series will break communication and the RGB lighting function will not work.
• Mount the fan(s) to the location of your choice in the chassis.
• Mind a location for the fan hub that allows connection for all of the fan’s RGB LED cables installed in your system.
• The fan controller will also need to be plugged into the fan hub for control of the RGB LED lighting.
• Mount the fan hub with the provided mounting strips

REFERENCE LINK

https://www.gamdias.com/en/component/case/TALOS_P1A