Gourmia GI500 Digital Electric Compact Ice Machine User Guide
IMPORTANT SAFEGUARDS
- READ ALL SAFETY & USAGE INSTRUCTIONS BEFORE USING ICE MACHINE PLUS.
- EXERCISE EXTREME CAUTION: AVOID ELECTRICAL SHOCK. DO NOT immerse cord, plugs or the Ice Machine Plus in water or other liquid.
- Do not overfill the Water Reservoir with water. Overfilling can result in damage and risk of electrical shock.
- Do not place any objects in the Water Reservoir or Ice Cube Basket, as it may cause damage to the machine.
- UNPLUG the Ice Machine Plus from outlet when not in use or before cleaning. Do not let cord hang over edge of table or counter or touch hot surfaces.
- Children should never use the Ice Machine Plus; close supervision is required when appliance is used near children.
- Operate the Ice Machine Plus on a level surface well away from any hot gas or electrical burner, heat source, combustible spray cans or pressurized items. Do not incline or move the Ice Machine Plus while operating. The Ice Machine Plus must be level for optimal performance.
- Do not operate the Ice Machine Plus outdoors.
FEATURES & FUNCTIONS
A. Ice Machine Plus Housing: The stainless steel Ice Machine Plus Housing holds the powerful internal compressor, air circulation system, interior water reservoir and ice cube basket. The Easy Vue Transparent Lid is attached.
B. Air Circulation System: The air circulation system draws air in through the Air Intake and releases it out through the vents.This assists the Ice Machine Plus in cooling efficiency.
C. Interior Water Reservoir: The Reservoir holds the water used to make the ice cubes. The Minimum Fill and Maximum Fill Lines are notched into the middle wall separating the Reservoir from the internal workings of the Housing. Always add more water than the Minimum Fill and less than the Maximum Fill. The Ice Cube Basket sits just above the Interior Water Reservoir.
D. EasyVue Transparent Lid: Because the Lid is transparent, it is easy to observe the ice-making in progress without continually opening the Lid. The Lid is attached to the Housing and should not be removed.
E. Ice Cube Basket: The Ice Cube Basket holds the maximum capacity of cubes; about 6 cups, and can be easily removed when filled. The Basket sits just above the Interior Water Reservoir.
F. Ice Cube Scoop: Use the plastic Scoop to protect the interior of the Ice Cube Basket and to easily remove the freshly-made ice cubes.
G. Easy Turn Water Drain: Drain the water from the Interior Water Reservoir easily by pulling the Drain Plug and allowing the water to release. Drain into the sink or a basin.
ASSEMBLY BEFORE USE
Assemble the Ice Machine Plus as follows:
- Place the Ice Machine Plus on a level surface at least 30 minutes prior to making ice cubes. (fig 1)
- Fill the Interior Water Reservoir with tap water to just below the Maximum Fill Line. Do not fill with ice water or any other liquid.
- Place the Ice Cube Basket into the Ice Machine Plus Housing. (fig 2).
- Close the EasyVue Transparent Lid.
- Press the Snowflake button on the LCD Control Panel to Start.
LCD CONTROL PANEL
- Snowflake button on panel = Start
- SET button on panel = Set the clock time, auto start time, and auto off time.
- ₳ button on panel = Activate/Deactivate the auto on and auto off features.
- SELECT button on panel = Select ice cube size
- Ц button on display = Ice cube obstruction/check box
- Ice cube sizes on display = 6 Large, 7 Medium, 8 Small
- Ice cube sizes on display = 6 Large, 7 Medium, 8 Small
- Ice cube sizes on display = 6 Large, 7 Medium, 8 Small
- MAX button on display = Maximum ice capacity
- Timing icon on display = Indicates that real time clock is displayed.
- Clock icons = On timer and Off timer active/set.
- 88:88 on display = Real time clock display, and timer settings.
- MIN button on display = Indicates water is below minimum
- Snowflake button on display = Ice making; Stand by
STEP BY STEP INSTRUCTIONS
Easy Manual Mode: Ice Cubes Now!
- Fill the Interior Water Reservoir with tap water to the Maximum Fill Line.
- Place the Ice Cube Basket over the Interior Water Reservoir.
- Plug in the Ice Machine Plus Housing plug to the outlet.
- Press the Snowflake button. The snowflake icon on the LCD display should start blinking, indicating that the unit is in Active mode.
Easy Self-Clean Mode
- Add equal parts water and vinegar (1:1) to the Interior Water Reservoir. Enough water and vinegar should be used to fill the reservoir at least halfway.
- Plug in the Ice Machine Plus. Press the Snowflake icon on the panel for at least 5 seconds to activate the Self-Clean mode. After the beep sound, the mode will activate.
- After the water is rinsed several times through the machine, the mode will stop and the Ice Machine Plus will indicate Stand-by.
- Drain the Interior Water Reservoir. Refill with water to the Maximum Fill Line. Press the Snowflake icon for at least 5 seconds to again activate the Self-Clean mode. When done, press Off and drain the reservoir again. Dry before use.
BEFORE FIRST USE AND MAINTENANCE
Before first use, use the Easy Self-Clean Mode to thoroughly clean and prepare the Ice Machine Plus for usage. (See instructions above) To clean the Ice Machine Plus after usage, drain the water from the Interior Water Reservoir using the Easy Turn Water Drain and plug. Dry the interior and exterior with a soft cloth. Do not use cleaning solvents, abrasives or other harsh detergents or chemicals in or on the Ice Machine Plus. Do not place any parts or accessories in the dishwasher
TROUBLESHOOTING
- Problem: Power indicator is not on.
- Cause: Power cord is not connected or plugged in. Internal components damaged.
- Solution: Check the plug and re-connect. Contact service for assistance.
- Problem: Malfunction light flashes.
- Cause: Possible obstruction in the ice-making housing.
- Solution: Check for and remove obstruction. Contact service for assistance.
- Problem: Ice-making performance is poor
- Cause: clogged ventilation outlets. water temp is too high. ambient temp is too high. refrigerant leak.
- Solution: clean cooling fan intake and vents. fill reservoir with room temp water. remove machine to cooler area. damaged system – contact service.
WARRANTY & SERVICE
This Limited Warranty is for one full year from the date of purchase. It is applicable to the original purchaser only and is not transferable to a third party user. Repair or replacement of defective parts is solely at the seller’s discretion. In the event that repair isn’t possible, the seller will replace the product/part. If product repair won’t suffice, the seller has the option of refunding the cash value of the product or component returned.
