Cocoon HE200073-S Wireless Camera With Solar Panel Guide

Cocoon HE200073-S Wireless Camera With Solar Panel Guide

Warranty Details

The product is guaranteed to be free from defects in workmanship and parts for a period of 12 months from the date of purchase. Defects that occur within this warranty period, under normal use and care, will be repaired, replaced, or refunded at our discretion.

Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage.

Safety Instructions

• CAUTION: Risk of fire
• Do not install near combustible or flammable surfaces.
• Keep a minimum distance of 0.5m from adjacent objects.
• Do not connect this lighting fixture to a dimmer switch or timer
• Mount your Floodlight in a sheltered location.
• To avoid damage to the unit – do not aim the sensor toward the sun. Avoid locating your Floodlight near fluorescent light fittings or ceiling fans on the same electrical circuit.
• The light must be wired to its own light switch. Do not interconnect with other lights on the same switch.
• Always refer to a licensed electrician if re-wiring the power cable.
• There are no user-replaceable parts inside.
• The equipment is not suitable for use in locations where children are likely to be present.

Parts List

1. 1 x Smart Wireless Camera
2. 1 x Base bracket*
3. 2 x Rechargeable batteries*
4.  1 x Screw for bracket*
5. 1 x USB charging cable*
6. 1 x Adhesive tab*
7. 1 x Solar panel
8. 1 x Silicone camera cover*
9. 1 x Long charging cable*
10. 1 x Getting Started guide*
11. 1 x User guide*
12. 1 x Screws for solar panel
13. 1 x Warranty certificate*
    Not shown

Technical Specifications 

• 1080P Resolution
• Water-resistant IP65
• Wide angle lens
• Micro SD Slot (up to 64GB, card not included)
• Rechargeable batteries via USB
• WI-FI 2.4Ghz
• Infrared night vision
• 2-way audio with noise suppression
• DC Power Input: 5V d.c. 1A
• Battery rating: 3.7V d.c. 2600mAh X 2

1. MicroSD card slot
2. Reset button
3. Power button

NOTE:

• Your phone does not have to be connected to your local Wi-Fi to use this device, however, mobile charges may apply
• The Cocoon Connect App is subject to change over time. The the manual is written as per Cocoon Connect app version 1.1.6. Please see our website for any updates on the app

Installing the Cocoon Connect App

• Know your Wi-Fi network & password
• The Smart Floodlight Camera requires a Wi-Fi connection to communicate with the Cocoon Connect application
• Make sure your mobile device is running iOS 10.0 or higher or Android 4.4 or higher.

Setting up the Cocoon Connect application for the first time

1. Download the Cocoon Connect application by scanning the QR code provided or downloading it from the iOS App Store or Google Play Store
2. Launch the application and select Register to register a Cocoon Connect account.
3. Enter the verification code into the password field
4. Set the password for your Cocoon Connect account.
   OPTIONAL: Click on the eye icon to unhide the password

Create a Home

The first time you set up the Cocoon Connect application, you will be prompted to create a Home. Creating a home allows you to invite other Cocoon Connect account holders to control the same device. Creating a home is a good way of giving other household members control of Connected Home devices.

1. Select Create home
2. Set the location for the Home. If location is turned on, the Cocoon Connect application can use your smartphone’s GPS function to pinpoint your location.
   NOTE: You do not have to enter a location or use this feature
3.  Add new rooms if required
4. Select Done on the top right-hand side to create the Home. You will get the confirmation Home Created Successfully

Setup

Installation

• MUST BE INSTALLED BY A LICENSED ELECTRICIAN.
• Turn off power to your Floodlight circuit at the main switchboard to ensure no power is being sent.
• IMPORTANT SAFETY ISSUES
• Modification of this product will void any warranty.

1. Find a suitable position for your Smart Floodlight Camera.
   
2. Mark mounting holes using bracket (A) as a template.
3. Drill mounting holes and insert Rawl plugs (B) if necessary and secure bracket (A) to the wall with supplied screw (C).
4. Attach the Smart Floodlight Camera to the bracket and secure it with fixing screws.
5. The Smart Floodlight Camera needs to be connected to the mains power supply. To ensure this is done correctly, match earth, neutral & live cords separately as per diagram below

Sensor functions

Time Turn the control dial TIME to adjust the duration of the illumination of the light The lighting duration can be adjusted from approx. 3 secs to 7 minutes (+/-10%). Turn the dial to the desired setting at any time via this switch on the Floodlight.

Lux
This dial controls the time you want your floodlight to illuminate. Choose between ALL DAY or only at NIGHT. Turn the dial to the desired setting at any time via this switch on the Floodlight.

Setting up Floodlight Camera in the Cocoon Connect app

1. Select the Home tab on the bottom left-hand side
2. Select the + icon on the top right-hand side or select Add Device to add a product
3. Confirm the blue/purple LED on the Floodlight Camera is flashing by selecting Next Step.
4. Verify that your smartphone is connected to the Wi-Fi network you wish to connect the Floodlight Camera to.
   • a. With the initial connection, it is recommended to have the Floodlight Camera near your Wi-Fi router to ensure a clear network connection.
   • b. Enter your local Wi-Fi password and select Confirm. You can click on the eye icon to see your password on your screen.
5. With the local Wi-Fi network confirmed you will need to scan a unique QR Code that will appear on your phone,

Operation

Settings menu

• a. Device Name: Allows the user to edit the name and Room location of the Smart Floodlight Camera
• b. Share Device.
• c. Device Information: Provides the device owner account name, device’s IP address, unique device ID, device time zone & the Wi-Fi strength of the network
• d. Use Echo: Provides step-by-step instructions on adding the Smart Floodlight Camera to an Amazon Echo device (Sold separately)
• Basic Function Settings:
  • Status Indicator:
  • Flip Screen: Rotates the video stream 180°
  • Time Watermark:
  • IR Night Vision:
  • Talk Mode:
• f. Motion Detection: Adjust motion sensitivity between Off, Low, Medium, or High
• g. Value Added Service (VAS) Purchase: Link to cloud storage for a video stream of Smart Floodlight Camera
• h. Storage Settings:
  • Storage Capacity: Shows total, used, and remaining capacity of SD Card (SD Card not included)
  • Local Recording: Switch on/off to use the SD card (not included)
  • Format: Completely erases the SD card.
• i. Remove Device: This allows you to remove the Smart Floodlight Camera from your account and home.

Adding other Cocoon Connect accounts to your Home

Follow these steps to add allow other Cocoon Connect Accounts access to a Home:

1. Select your current Home in the top left corner of the main page and select Home ManagementEnter the name (or nickname) of that person
2. Select a profile picture for that person (optional)
3.  Select the country/region of the account
4. Enter that account’s mobile number or email address
5. Select if you want to give that account administrator rights – allowing them to make changes to the settings of devices in that home (including removing the whole home).
6. Select completed and Cocoon Connect will send an invitation for the account to join the home to access the connected devices.

Troubleshooting

My connection process does not work

Why is there no prompt from the camera?

1. Ensure that the lens is not blocked.
2. Place the app QR code in front of the camera at a distance of 15cm to 20cm.
3. Reset your camera and try step 2 again.

FAQs

Maintenance, Storage & Disposal

The Smart Floodlight Camera does not require scheduled maintenance or cleaning. Should cleaning be necessary, simply wipe the outside surface with a dry soft cloth. At the end of its working life, do not throw this product out with your household rubbish. Electrical and electronic products contain substances that can have a detrimental effect on the environment and human health if disposed of inappropriately.

Observe any local regulations regarding the disposal of electrical consumer goods and dispose of them appropriately for recycling. Contact your local authorities for advice on recycling facilities in your area. Observe local regulations regarding the disposal of waste products. Contact your local authorities for advice on recycling facilities in your area. Please keep the original packaging carton and materials in a safe place.

Repair and Refurbished Goods or Parts Notice
Please telephone us on 1300 663 907 or write to us at:

• Balco Brands Pty Ltd
• PO Box 537 Bayswater Business Centre, Victoria, Australia
• 1300 663 907 – Hours: Mon-Fri 8:30 am – 6:00 pm AEST
• help@cocoonproducts.com.au

DOWNLOAD PDF

Cocoon HE200074 Smart Floodlight Camera Setup Guide

REFERENCE LINK

https://www.cocooncompany.dk/en/forside/