Hiseeu PoE IP Security Camera System User Manual
Camera Connection Diagram
Attention: There are two methods of connection:
- Method 1:
To use with a non-PoE router, please connect the camera to a PoE switch or a PoE injector and the switch/injector to the router as shown. - Method 2:
To use with a PoE router, please connect the camera directly to the routers as shown.
Camera Access Information
To login to the system for the first time, use the following default IP address, username and password. Once you’ve successfully logged in, it is highly recommended to change the password for security reasons.
Default IP address: 192.168.1.120
Network mask: 255.255.255.0
Username: admin
No password
The default HTTP Stream: http://192.168.1.120/action/stream?subject=mjpeg& user=admin&pwd=
HTTP Snapshot URL: http://192.168.1.120/action/snap?cam=0&user= admin&pwd=
The IP address, User and Password showing in the above URL are factory default. Please use IPC’s current IP address, user name and password to replace the content.
If there is SD/USB supported in the camera, please be noted that:
- Recommend SD card class 10
- Recommend insert the SD card first then turn on the IP Camera
- SD card must be formatted as FAT32. IP Camera will not recognize NTFS format.
You will be asked to login the camera using the correct username and password after 30 minutes inactivity, and the camera will be locked after 6 failed login attempts. It’s strongly suggested that the camera’s password should be changed periodically, and it should contain a combination of digits, characters and some special characters.
Connecting the camera from the web interface
- Connect your PC/Mac/Linux to your router.
- Insert the CD-ROM into your PC/Mac/Linux and install the corresponding version of IPCManager. If you do not have a CD-ROM, please contact the saler or send email to us :support@hiseeu.com. Download link for MACos: https://www.dropbox.com/s/jjh4tfoftvuq175/HISEE U_IPCManager_V4.03.06_mac_x86-64.dmg?dl=0 Download link for Windows: https://www.dropbox.com/s/j9ga5igfoa34rcv/HISEE U_IPCManager_V4.03.06_win_x86.exe?dl=0
- Open the IPCManager after it is successfully installed. Cameras on your network will automatically found and listed in the result pane, as shown in the sample picture below:
- Enter the camera’s default username and password in the bottom left corner. Default username: admin. Default no password. Select all the cameras you wish to modify or simply check the “Select All” check box.
- After the cameras are selected, assigned a static IP using the “IP From” box or check the DHCP checkbox for your router to assign an IP to the cameras. Click on “Modification” to apply the change. (Note: The camera’s IP will most likely change after a power cycle if the IP setting is left on DHCP. To make it static, you can do so in the router by putting the camera’s IP in DHCP reservation or change the IP setting back to static after you are able to access the web interface).
- After applying the change, the IP address of the camera will change. Right click on the camera you wish to access and select “Open Home” to access the camera’s login screen, as shown in the next picture:
- Enter the default username and password (admin/no password) to log into the web interface.
- For Internet Explorer users, you will be prompted to install a plug-in for the camera. The plugin is necessary for the web interface. After installation, please refresh the page and click on “Allow” to allow the plugin to run. If you are not prompted automatically the first you log into the web interface, please click on the download link to manually download the installation file. You can download IE browser plugin here: http://www.hiseeu.com/images/article/2019102 2jyfmel.exe
- For other browsers, Adobe FlashPlugin is required. Please install Adobe Flash or allow Adobe Flash to run to access the web interface.
NVR Access
- The camera supports connecting to any NVR that use the ONVIF standard protocol or connecting to our NVR through private protocol. This allows users to view live video, playback video, and to save recorded data. To connect to an NVR, use an Ethernet cable to link the camera to an NVR through a PoE LAN Switch, or connect to an NVR’s built-in PoE port.
- Please follow the diagram below when connecting a camera to an NVR.
- If there is a problem adding the camera, please make sure you have the correct username and password when adding the camera to the NVR.
- Please refer to NVR’s user manual for the details if there are problems with the NVR.
Please modify the cameras’ IP address to be the same segment as the NVR LAN port. The camera can work with some brands NVR by private protocol or plug and play, please contact your sales for the detailed information.
Accessing the camera using Smartphone/tablet
- Download and install the “Danale” app on your mobile device.
- After installing, open the app and register an account.
- On the Danale welcome screen press “add device” button.
- Select “Scan QR code”.
- Use the scanner to scan the QR code located on the camera.
- Name your camera as requested, wait for the app to load the camera and display live video.
Connect the camera on PC EZClient
- Connect your PC/Mac/Linux to your router.
- Insert the CD-ROM into your PC/Mac/Linux and install the corresponding version of EZClient. If you do not have a CD-ROM, please contact the saler or send email to us :support@hiseeu.com. Download link for MACos: https://www.dropbox.com/s/rva1mzx86mbozif/ HISEEU_EZClient_V1.00.35_mac_x86-64.dmg? dl=0
Download link for Windows: http://www.hiseeu.com/images/article/157250 8720.exe - Open the EZClient after it is successfully installed. User name is admin, default no password
- Search the camera IP address then check the live video
REFRENCE LINK
