Table of contents
show
HOLMAN CLXRGB60 RGB Colour Wi-Fi Garden Light Controller User Guide
INTRODUCTION
The CLXRGB60 Garden Light wifi Wi-Fi Controller allows anyone with a smartphone and Wi-Fi access to control their garden lights from anywhere on the globe. Connect your 4-Pin Plug + Socket to your Wi-Fi Garden Light Controller to create stunning lighting displays or select from existing scenes to bring your garden to life. Adjust the colour, mood, intensity, brightness and display all from your smartphone.
INITIAL SETUP
- Download Holman Home onto your mobile device via the
Open Holman Home on your mobile device- Tap REGISTER 3
Read our Privacy Policy and tap AGREE if you wish to proceed
Follow the prompts to register a Holman Home account with your email or mobile number
The home screen will appear and you are now able to add devices to Holman Home by tapping ADD DEVICE or plus- To find the Garden Light Controller, tap GARDEN LIGHTING
- Tap the RGB GARDEN LIGHTING icon to search for your Garden Light Controller
- This begins the Wi-Fi pairing process with your Garden Light Controller. Follow the prompts on your mobile device to complete the pairing process
Open Holman Home on your mobile device
Read our Privacy Policy and tap AGREE if you wish to proceed
Follow the prompts to register a Holman Home account with your email or mobile number
The home screen will appear and you are now able to add devices to Holman Home by tapping ADD DEVICE or plus
BASIC APP INFORMATION
After completing the Wi-Fi pairing process, your Garden Light Controller will be available on the ALL DEVICES screen. Tap your Garden Light Controller for advanced lighting controls
- Tap at the bottom of the screen to turn the light on or off
- When your garden lights are on it is possible to:
- Change the colour by using the scroll wheel
- Adjust the brightness of the light using the slider
- Adjust the intensity of the colour using slide
- Tap LEFT TIME to set a timer for the lights to stay on for a duration
- Tap SCHEDULE to set on and off timers for the light
DEVICE INFORMATION
- Tap as shown to display Device Information
- Change the name, icon and allocate a location on your Garden Light Controller
- Choose DEVICE INFORMATION to see the Virtual ID, IP and MAC Address, Device Time Zone and Signal Strength
- Select TAP-TO-RUN AND AUTOMATION for any smart scenarios you have created
- Tap ALEXA or GOOGLE ASSISTANT for information on setting up these services
- Toggle OFFLINE NOTIFICATION to be notified when your device has been offline for more than 30 minutes
- Tap SHARE DEVICE to share control of your Garden Light Controller with a user outside your home. We
recommend using the HOME MANAGEMENT function if you wish to share your Garden Light Controller. - Tap CREATE GROUP to control multiple Garden Light Controllers
- For support and fault reporting, tap FAQ & FEEDBACK
- Add the device to your HOME SCREEN (apple iOS only)
- Tap CHECK DEVICE NETWORK to run a test on your Wi-Fi signal
- Tap CHECK FOR FIRMWARE UPGRADE to ensure your Garden Light Controller has the latest firmware
- Tap REMOVE DEVICE to remove your Garden Light Controller from Holman Home
- Tap RESTORE FACTORY DEFAULTS to remove your Garden Light Controller from Holman Home and clear all settings back to factory defaults
TROUBLESHOOTING
| Symptom Suggestion | |
|
CLXRGB60 Controller cannot connect to Holman Home |
|
| No LED lights on | No AC power, or a blown fuse or transformer. Check fuse and transformer output. Turn power on |
| Buttons not responding | Please contact our Customer Service team 1300 176 188 or email support@holmanindustries.com.au |
