Honey-Well-TC10PE-Portable-Evaporative-Air-Cooler-Featured-Image

HoneyWell TC10PE Portable Evaporative Air Cooler User Manual

Honeywell logo

HoneyWell TC10PE Portable Evaporative Air Cooler User Manual

Honey-Well-TC10PE-Portable-Evaporative-Air-Cooler-Image-1

PARTS DESCRIPTION

Honey-Well-TC10PE-Portable-Evaporative-Air-Cooler-Image-2

  1. Display Screen
  2. Control Panel
  3. Louvers
  4. Front Grill
  5. Drain Plug
  6. Handle
  7. Remote Control
  8. Honeycomb Cooling Media
  9. Rear Grill
  10. Water Fill Tray
  11. Water Tank

CONTROL PANEL

Honey-Well-TC10PE-Portable-Evaporative-Air-Cooler-Image-3

FUNCTION BUTTONS

POWER
Press the POWER button to turn the unit on. The cooler will start automatically at medium speed. After a few seconds, the speed will switch to low. To turn the unit off, press the button again.

SPEED
Press the SPEED button repeatedly to change the speed between H – M – L – S*. The indicator light will show the selected speed:

Honeywell CS10XE Evaporative Air Cooler Guide product fig 3

When the SLEEP mode is selected, the fan will run on High for one hour, then Medium for the second hour, and on Low speed from the third hour onwards until you switch off the unit.

TIMER
Press the TIMER button until the desired time duration setting is selected. When the set time has passed, the unit will automatically turn off (the unit remains in Standby mode until the power cord is unplugged from the electrical socket). The TIMER function allows you to program the unit for up to 7.5 hours of use.

SWING

Honeywell CS10XE Evaporative Air Cooler Guide product fig 4

Press the SWING button untilHoneywell CS10XE Evaporative Air Cooler Guide product fig 5is illuminated on the display screen. The louvers will begin to move left to right automatically. Vertical Air Flow – You can manually adjust the louvers to change vertical airflow.

COOL
Press the COOL button untilHoneywell CS10XE Evaporative Air Cooler Guide product fig 6

is illuminated on the display screen. This activates evaporative cooling. The water pump will operate and you will feel the cooler air after the Honeycomb Cooling Media is completely wet.

WARNING:

Please ensure sufficient water is in the water tank otherwise you may hear a Low Water Alarm and the cooler will start in a Fan only mode without evaporative cooling.

REMOTE CONTROL

Honeywell CS10XE Evaporative Air Cooler Guide product fig 7

  • Honeywell CS10XE Evaporative Air Cooler Guide product fig 8Power: ON / OFF
    • Honeywell CS10XE Evaporative Air Cooler Guide product fig 9Speed: Low / Medium / High / Sleep*
    • Honeywell CS10XE Evaporative Air Cooler Guide product fig 10Cool: Evaporative cooling ON / OFF
    • Honeywell CS10XE Evaporative Air Cooler Guide product fig 11Swing: Controls the motion of the louvers
  • Honeywell CS10XE Evaporative Air Cooler Guide product fig 12Timer: Controls the Timer function for automatic off
  • Note
    • The remote control requires a CR2032 (1 x 3V) coin type or equivalent battery for replacement..

CAUTION:
Unplug the unit from the electrical power outlet before emptying or refilling the water tank.

  • Open the Water Fill Tray located at the back of the unit. The Water Level Indicator is located at the side of the unit. Refill the water tank when the water level is low
  • Note:
    The water capacity refers to the total volume of water that can be contained within the air cooler water tank and water distribution system. The water capacity in the tank at the “Max.” indicator level may be lower than the actual water capacity of the air cooler.

CLEANING & DRAINING THE WATER TANK

  • If the cooler will not be used for a long period of time, please refer to the STORAGE & MAINTENANCE GUIDELINES located in the separate Safety & Maintenance Guide.

WARNING:
Before cleaning the unit, switch the unit OFF and disconnect it from the power outlet

    • Move the unit to a location where the water can be drained. Remove the cap from the Drain plug located at the bottom of the unit. Allow the tank to empty.
    • Refill the water tank with clean water and drain it completely. Clean the water tank with dish detergent or a damp cloth and rinse it thoroughly.
    • Refill the water tank with clean water, up to the maximum level.
    • Replace the top of the air cooler carefully back onto the tank and lock the side latches..

Removing the Carbon Dust Filter*/ Honeycomb Cooling Media:

Honeywell CS10XE Evaporative Air Cooler Guide product fig 13

    1. Remove all the screws from the Rear Grill of the Air Cooler.
    2. Carefully pull out the rear grill from the cooler.
    3. Slide out the Carbon Dust Filter* and clean it with water.
    4. The Honeycomb Cooling Media is secured on the Honeycomb Frame by a Horizontal Bar that is fixed in place by two screws. Remove these two screws to release the Horizontal Bar and slide the Honeycomb out of the frame
    5. Replace or clean media with water and a damp cloth as needed.

WARNING:
DO NOT operate the Air Cooler when the Rear Grill is removed from the Air Cooler, or if there is a loose-fitting Rear Grill. Doing so can cause serious injury or dangerous electrical shock.

TECHNICAL SPECIFICATIONS

    • Model CS10XE
    • Voltage 110 – 120 V
    • Frequency 60 Hz
    • Ampere 0.85 A
    • Wattage 102 W
    • Water Capacity 10 Litres / Litros 2.6 Gallons / Galones
    • Cooling Media Honeycomb
    • Product Dimension 344 (W) x 400 (D) x 800 (H) mm 13.5 (W) x 15.7 (D) x 31.5 (H) in
    • Net Weight 8.4 kg / 18.5 lbs

ELECTRICAL WIRING DIAGRAMHoneywell CS10XE Evaporative Air Cooler Guide product fig 14DOWNLOAD LINK

https://www.honeywell.com/us/en

HoneyWell TC10PE Portable Evaporative Air Cooler User Manual

Leave a Reply