Hisense HS218 2.1 Channel Soundbar User Manual

Hisense HS218 2.1 Channel Soundbar User Manual

What’s in the Box 

Remote control

1. Switch the unit between the ON and STANDBY modes.
2. (MUTE) Mute or resume the sound.
3. MOVIE Switch to MOVIE EQ effect.
4. MUSIC Switch to MUSIC EQ effect.
5. VOL+/VOL- Increase/decrease the volume level
6. Skip to the previous/next track in Bluetooth/USB mode
7. /PAIR Play/pause/resume playback in Bluetooth/USB mode. Press and hold to activate the pairing function in Bluetooth mode or disconnect the existing paired Bluetooth device.
8. NEWS Switch to NEWS EQ eect.
9. HDMI ARC Select the HDMI ARC mode.
10. OPT/COAX Select the OPTICAL/COAXIAL mode.
11. (BT) Select Bluetooth mode.
12. LINE IN Select the LINE IN mode.
13. USB Select the USB mode.

Replace the Remote Control Battery

1. Press and slide the back cover to open the battery compartment of the remote control.
2. Insert two AAA-size batteries (included). Make sure the (+) and (–) ends of the batteries match the (+) and (–) ends indicated in the battery compartment.
3. Close the battery compartment cover.

• Do not mix old and new batteries;
• Do not mix alkaline, standard (Carbon-Zinc), or rechargeable (Ni-Cd, Ni- MH, etc.) batteries.

Identifying the Parts

Main Unit 

1. Remote Control Sensor
   Receive signal from the remote control.
2. LED Indicators
   1. Red: In STANDBY mode.
   2. Orange / Orange flash: In Optical / Coaxial mode.
   3. Blue: In Bluetooth mode.
   4.  White: In HDMI ARC mode.
   5.  Green / Green flash: In LINE IN / USB mode.
3. Screws
   Remove the screws then install the wall
   mounting screws into the back of the unit.
4. (ON/OFF) Button
   Switch the unit between ON and Standby mode.
5. +/- (Vol+/Vol-) Buttons
   Increase/decrease the volume level.
6. (SOURCE) Button
7. AC~ Socket
   Connect to the power supply.
8. LINE IN Socket
   Connect to an external audio device.
9. USB Socket
   Insert the USB device to play music.
10. HDMI ARC Socket
    Connect to a TV via HDMI cable.
11. COAXIAL Socket
    Connect to a coaxial audio output on the TV.
12. OPTICAL Socket
    Connect to an optical audio output on the TV.

Wireless Subwoofer

1. AC~ Socket
   Connect to the power supply.
2. PAIR Button
   Press activate the pairing function between the main unit and the subwoofer.
3. PAIR Indicator
   Light up solidly when the pairing succeeds.

Connections

Pair up with the subwoofer
The subwoofer and the soundbar will be paired automatically when both are powered on. If no audio from the wireless subwoofer can be heard, manually pair up the subwoofer.

Basic Operation

Standby/ON When you first connect the main unit to the mains socket, the main unit will be in Standby mode.

• Press thebutton on the unit or on the remote control to switch the unit ON.
• Press thebutton again to switch the unit back to STANDBY mode.
• Disconnect the mains plug from the mains socket if you want to switch the unit OFF completely

Auto Wake
If a TV or an external device is connected (LINE IN / OPTICAL / COAXIAL / HDMI ARC), the unit will switch on automatically when the TV or the external device is switched on.

Automatic Power Off Function
The unit automatically turns to Standby mode after about 15 minutes if the TV or the external unit is disconnected, or switched off.

• To switch the unit off completely, remove the mains plug from the mains socket.
  • Please turn the unit off completely to save energy when not in use.

Wall Mounting

REFERENCE LINK

https://www.hisense-usa.com/audio/hs218-hisense-hs218-2-1-channel-soundbar-subwoofer

DOWNLOAD LINK

Hisense HS218 2.1 Channel Soundbar User Manual