Imou Cell 2 Rechargeable WiFi Security Camera User Manual
Insert the Battery (Part 1)
- Remove the bottom cover of the camera and then insert the battery.
- Make sure the battery clicks right into the place.
Power on the Camera (Part 2)
- Press the reset button to turn on the camera and the LED will light up in green.
- If the battery is drained, please charge it with a 5VDC 2A power adapter (not provided). Imou solar panel is also highly recommended.
Get the Imou Life App (Part 3)
Scan the QR code on part 3 or search for “Imou Life” to download and install the app. Create an account and log in.
Set Up the Camera (Part 4)
Scan the QR code on the body of the device or on the cover of this guide with the app, and then follow on-screen instructions to complete the setup.
Install the Camera (Part 5)
Fully charge the camera before installation. Make sure the mounting surface is strong enough to hold three times the weight of the camera.
LED Status
Device Status
On Battery
Red
Green
Solid
Solid
Charging
Fully charged
On Camera
Green
Green
Red
Blue
Red & Green
Off
Solid
Flashing
Flashing rapidly
Solid
Flashing
Flashing
Alternating
Waking up
Operating correctly
Ready to set up the device
Setup process in progress
Resetting to factory default
Network disconnected
Power supply changed, e.g., from
battery power to external power
Updating firmware
In sleep mode
The battery needs recharging
In case you need to reset the camera, press and hold the reset button for 10 s until you hear the beep.
REFRENCE LINK
