Table of contents
show
Insignia NS-G3DSVC102-C e 3DS XL system
ATTACHING THE SLIM FIT CASE:
- Slide the 3DS XL® system bottom first into the BOTTOM piece of the Slim Fit Case and then snap the case onto the 3DS® XL system.
- Slide the front of the TOP piece of the Slim Fit Case onto the top of the 3DS XL® system and then snap the case onto the 3DS XL® system. The charging cradle cannot be used to charge the Nintendo 3DS XL with the product attached. Please charge by plugging the DC plug of the AC adapter to the AC adapter connector of the Nintendo 3DS XL. Also, when charging the Nintendo 3DS XL with the DC plug of the AC adapter plugged into the AC adapter connector, please do not open the Nintendo 3DS XL to a full 180° as it may damage the system.
REMOVING THE SLIM FIT CASE
CAUTION: Failure to follow these instructions could damage your 3DS XL system.
- Firmly hold the 3DS XL system and pull the tab locks off.
- Slide the case off the system as shown.
- Continue to firmly hold the 3DS XL® system and locate the tab locks on the TOP piece of the Slim Fit Case. Release the Tab Locks and remove the TOP piece of the Slim Fit Case as shown.
