Insignia NS-PSGH Wired Gaming Headset Manual
PACKAGE CONTENTS
- Stereo Gaming Headset
- Quick Setup Guide
FEATURES
- Compatible with PS4 DualShock and PS5 DualSense with a 3.5mm headset jack.
- 40mm High-definition driver
- Cushions made of breathable mesh
- On the ear volume control dial on the ear cup
SAFETY INFORMATION
- To prevent possible hearing damage, do not listen at high volume levels for long periods, do not use the headphones while driving or cycling, or in any situation where you should be able to hear other sounds.
- As a guide to setting the volume level, check that you can still hear your own voice when speaking normally while listening with the headphones.
SETTING UP YOUR HEADSET
- insert the Stereo headset’s 3.5mm audio plug into the PS4/PS5 controller audio output jack.
- Navigate to Settings>> Devices>>Audio Devices.
- Set Input & Output devices to the headset connected to the controller.
- Set Output to headphones to All Audio.
- Select Adjust microphone level and follow the on-screen instructions to calibrate your microphone.
WARNING:
Extended exposure to high volumes when using your headset may result in permanent hearing loss.
MIC MUTE
- Mic Boom up to mute.
- Mic Boom down to unmute.
NOTE:
For optimal microphone performance, make sure to adjust the microphone sensitivity in the audio settings of your gaming console. This should be checked each time you play as different games, different controllers, and different consoles all impact microphone performance. It may also help to unplug the headset cable and plug it back into the controller.
ADJUST VOLUME
- Turn the volume dial on the ear cup to the preferred audio level.
TROUBLESHOOTING
If you encounter problems, try the solutions below:
No sound from your headset.
- Check that the 3.5mm plug is securely connected to the controller audio output jack.
- Check your audio settings to ensure your headset is selected as the assigned audio device.
- Check that the volume dial is not turned to a minimum.
Your Mic is not transmitting sound.
- Check your audio settings to ensure your headset is selected as the assigned audio device.
- Move the mic down from the vertical (mute) position
- Move your microphone closer to your mouth.
LEGAL NOTICES
FCC Information
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Note:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
- Increase the separation between the equipment and the receiver. Reorient or relocate the receiving antenna.
- increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
ICES-003 Statement
This Class B digital apparatus complies with Canadian ICES-003. Cet apparel numérique de la classe B estconforme à la norme NMB-003 du Canada.
One-year limited warranty
Visit www.insigniaproducts.com for details.
Contact Insignia:
For customer service, call 1-877-467-4289 (U.S. and Canada) or 01-800-926-3000 (Mexico)
www.insigniaproducts.com
INSIGNIA is a registered trademark of BBY Solutions, Inc. Registered in some countries. Distributed by Best Buy Purchasing, LLC, 7601 Penn Ave South, Richfield, MN 55423 U.S.A. ©2013 BBY Solutions, Inc. All Rights Reserved.
REFERENCE LINK
https://www.insigniaproducts.com/pdp/NS-PSGH/6493089
