JORVET J825P Floor Scales User Manual

JORVET J825P Floor Scales User Manual

Overview

About your machine

 Description
The PS250 is a self contained portable platform scale with a remote display. The platform is constructed of mild steel; it has four adjustable feet for levelling and a non-slip mat for the platform. A bracket and fixings are supplied for desk or wall mounting the indicator head. For best results, always install the platform on a hard, flat, level surface. A stainless steel platform version is available

 Display

Navigating the Setup Menu

1. Press and hold until display shows (approximately three seconds).
2.  Release , display shows
3.  Press to move across to the option or value you require.
4.  Press to select an option and save. To exit the setup menu and save your changes:

• • Press until you see End.
  • Press to save your changes and return to weighing mode.

Specification

• Capacity/resolution:         250 kg x 0.1 kg 550 lb x 0.2 lb
• Display Height:                    25mm 7 segment LCD
• Operating temperature:    5º C to 35º C
• Weight:                                      22kg
• Platform:                                  900mm x 550mm x 50mm
• Display head:                         270mm x 90mm x 45mm
• Power supply:                       6 x 1.2V metal hydride rechargeable batteries
• Recharge adaptor:              1 x 100V-240V AC/13V DC

Using Tares

Hold Function

This function enables you to weigh over sized objects that may obscure the display. The system calculates an average weight reading and displays this weight value. This makes the hold function ideal for weighing animals that may be moving

Power Supply

The indicator head contains six metal hydride re-chargeable batteries. The low battery indicator is displayed when the battery power is insufficient to power the scale.

Recharging the batteries
Insert the AC re-charger adapter into the socket on the indicator head to recharge the batteries.

Recharging time is approximately 14 hours. Fully charged batteries should give approximately eight hours of continuous use Disconnect from the mains power supply before disconnecting the adaptor from the indicator head.

AC adaptor
The 100V/240V recharge adaptor supplied with the PS250 is provided with four convertion connectors:

• 2 pin European
• 3 pin UK
• 2 pin USA
• 2 pin Australia

Setup Mode

2 Calibration

1.  In setup mode, select and then select whether you want to use 1/2, full or 1/4 load for calibration (see ’Calibration weights’on page 12). The example shown in these instructions uses kg weight units and 1/2 load. Save your selection and then switch off the scale
2. Display shows zero count value.

REFERENCE LINK