You are currently viewing Lexibook RP505TS Disney Toy Story Buzz Projector Clock User Guide

Lexibook RP505TS Disney Toy Story Buzz Projector Clock User Guide

Lexibook-RP505TS-Disney-Toy-Story-Buzz-Projector-Clock-User-Guide-Image

Lexibook RP505TS Disney Toy Story Buzz Projector Clock User Guide

Lexibook-RP505TS-Disney-Toy-Story-Buzz-Projector-Clock-User-Guide-Image-1

Product Description

Lexibook-RP505TS-Disney-Toy-Story-Buzz-Projector-Clock-User-Guide-Image-2

  1. MODE button: selects the setting mode.
  2.  button: press this button to snooze the alarm
  3. VOL. button: Press once and then press on UP or DOWN to change the volume for the sound effects.
  4. LCD screen
  5.  Battery compartment (at the bottom of the unit)
  6. Night-light rubber feet
  7. DOWN button: press this button to turn the volume down.
  8. UP button: press this button to turn the volume up.
  9. Buzz button
  10.  Speaker
  11. Projector
  12. PROJECT button: projects the time onto the ceiling.

Battery Information

Your Alarm Clock Projector works with 4 x 1.5V AA / LR6 type batteries (not included). When you use the Alarm clock for the first time:

  1.  Using a screwdriver, open the battery compartment cover located at the bottom of the unit.
  2. Install the 4 x AA/LR6 1.5V batteries (not included) observing the polarity markings inside the battery compartment.
  3.  Close the battery compartment and tighten the screw

WARNING: Malfunction or loss of memory may be caused by strong frequency interference or electrostatic discharge. Should any abnormal function occur, remove the batteries and insert them again.

Lexibook-RP505TS-Disney-Toy-Story-Buzz-Projector-Clock-User-Guide-Image-3

Installation

Unpacking the device
When unpacking, ensure that the following elements are included:

  • 1 x Alarm Clock Projector
  • 1 x Instruction manual

WARNING: All packaging materials, such as tape, plastic sheets, wire ties and tags are not part of this product and should be discarded.

Settings

CLOCK

  1.  To set the clock, press and hold the MODE key.
  2.  Press UP/DOWN to set 12H/24H.
  3.  Press MODE key again.
  4. Press UP/DOWN to set hour.
  5.  Press MODE key again.
  6.  Press UP/DOWN to set minutes.
  7.  Press MODE key to come back to the Clock Mode.

ALARM

  1.  To set the alarm, press MODE once. “ “ appears on the screen, then press and hold MODE button, press UP/DOWN button to choose ON.
  2.  Press UP/DOWN to set hour.
  3.  Press MODE key again.
  4.  Press UP/DOWN to set minutes.
  5.  Press MODE key again.
  6. Press UP/DOWN to choose between the 4 different ringtones.
  7. Press MODE key to finish.

Notes: The alarm lasts 1 minute. When the alarm sounds, press key to snooze the alarm for 5 minutes (the
bell icon will flash), or press any other keys to turn it off.

MELODIES
Press Buzz to play one of the 4 pre-loaded melodies.

NIGHTLIGHT
Press once on the base of the clock to switch on the nightlight. Press again to stop it.

PROJECTOR
Press PROJECT to project the time onto the ceiling. The projection will gradually fade out after a few seconds.

Specifications

Dimensions(L)180 x (l)160 x (H)195 mm
Batteries4 x AA/LR6 1,5V

Maintenance

The finish on your unit may be cleaned with a dust cloth and cared for as other furniture. Use a soft, clean cloth moistened with plain, lukewarm water to clean the exterior of the unit. Use caution when cleaning and wiping the plastic parts. Mild soap and a damp cloth may be used on the front panel.

Warranty
For any claim under the warranty or after sale service, please contact your distributor and present a valid proof of purchase. Our warranty covers any manufacturing material and workmanship defect, with the exception of any
deterioration arising from the non-observance of the instruction manual or from any careless action implemented on this item 

REFERENCE LINK

https://www.lexibook.com/

Leave a Reply