Table of contents
show
Lubluelu CF-X2101A Cordless Vacuum Cleaner User Guide
SAFETY WARNING
Before using this product, please read all the contents of this manual carefully and install the machine according to the steps in this manual.
- This product is only suitable for normal home environment, not suitable for industrial or outdoor use.
- This product is not intended for use by persons with physical, sensory or intellectual disabilities or lacking experience and common sense (including children) unless there is supervision or instructions to ensure their safe use.
- When charging, please use the product-specific charger provided by us; other types of chargers will cause battery failure or extreme thermal effect.
- When charging, please use the product-specific charger provided by us; other types of chargers will cause battery failure or extreme thermal effect.
- Warning: do not touch the rotating parts. Clean up any (hair, fuzz, etc.) that may block the brushes and wheels.
- This unit contains non-replaceable batteries. Do not disassemble at will without permission to avoid danger.
- Do not touch the plug or any live part of the product with wet hands to avoid risk of electric shock.
- If the charger or plug is damaged, please stop using it. Please contact the service personnel for replacement to avoid injury.
- • When using, if you find that there is a leak or the temperature of the motor is too high and there is an abnormal noise, such as body over- heating, abnormal noise, smell, weak suction, etc., please stop using it immediately and contact the after-sales personnel
- When not in use for a long time, turn off the unit and unplug the charging plug.
- After using the machine, please clean the sewage bucket in time, keep the ventilation channel clear, avoid blockage caused by inhaling droplets and avoid heating the motor, which will affect the service life.
- After using the machine, please keep it in a dry place. Wet places can affect the insulation and longevity of electrical appliances.
- There is a circuit inside the scrubber body and brush head, and the user can’t dip it in water, otherwise it will cause electrical failure.
- Do not suck in high-temperature substances (unlit cigarette butts, hot matches or ashes, etc.), ultra-fine substances (such as lime, cement, wood chips, gypsum powder, ash, charcoal powder, etc.), hazardous substances ( such as solvents, detergents, etc.), chemical substances (such as acidic substances, detergents, etc.) and other substances with uncertain physical properties.
- Do not vacuum sharp objects with this unit, such as glass fragments, small toys, pins, paper clips, stones, plaster, etc. These objects can cause blockages and damage the machine.
- Shoe polish, paint, pigments and other stains with strong grease, high viscosity or strong coloring are not within the scope of cleaning this product.
PRODUCT OVERVIEW
Product overview
Display
Note:
- Self-cleaning function: It can only be activated when the charging base is charged
- Mode selection: The default automatic mode is activated. Press the mode switch button to select automatic mode/efficient mode/water absorption mode. When the floor is dirty, you can choose the efficient mode, which has higher suction and water flow. When there is a lot of liquid on the floor, the water absorption mode can be switched, the suction is the biggest and the water is stopped.
- Fault indication : When the dirty tank is full, the dirty tank full indicator will light up and broadcast the voice, then the host will stop. Return to normal after discharging the dirty water. When the clean water tank runs out of water, the clean water tank low water indicator will light up and play the voice. Return to normal after adding water. When the roller brush is tangled with foreign matter or stuck, the roller brush block light will light up and play the voice at the same time, then the host will stop. After cleaning the foreign matter, restart the machine and return to normal.
PRODUCT INSTALLMENT AND DISASSEMBLING
Installation and disassembling of the handle.
- Insert the end of the handle into the host port in the vertical direction, hear a click and the handle is tight and not loose, that is, the installation is successful.
- Insert a small screwdriver or other object into the handle removal hole and pull the handle un at the same time.
Installing and uninstalling the clean water tank.
- Put the body straight, press the clean water tank release button with both hands at the same time and pull up to remove the water tank.
- Place the bottom of the clean water tank into the opening of the floor brush, press the clean water tank and the installation is successful when you hear a click.
