Maytag-MOES6027LZ00-Built-In-Electric-Single-Oven-User-Manual-Feature-Image

Maytag MOES6027LZ00 Built-In Electric Single Oven User Manual

Maytag-logo

Maytag MOES6027LZ00 Built-In Electric Single Oven User Manual

Maytag-MOES6027LZ00-Built-In-Electric-Single-Oven-User-Manual-Image

Using Your Oven

  • Step 1: Select oven function
  • Step 2: Set the temperature
  • Step 3: Press Start
  • Step 4: Place food inside the oven once set temperature is reached. Close the oven door.
  • Step 5: (Optional) Enter time to cook
  • Step 6: The Cancel button can be used to cancel the function during or after cook time.

NOTE: For more detailed instructions on specific functions, see the online Control Guide.

Using your Microwave Oven

  • Step 1: Place food inside the microwave oven. Close the oven door.
  • Step 2: Select microwave function
  • Step 3: Enter time to cook
  • Step 4: Press Start
  • Step 5: The Cancel button can be used to cancel the function during or after cook time.

NOTE: For more detailed instructions on specific functions, see the online Control Guide.

POSITIONING RACKS AND BAKEWARE

Rack Positions

IMPORTANT : To avoid permanent damage to the porcelain finish, do not place food or bakeware directly on the oven door or bottom.

Racks

  •  Position racks before turning on the oven.
  • Do not position racks with bakeware on them.
  • Make sure racks are level.
  • Place food so it will not rise into the broil element. Allow at least 1/2″ (1.3 cm) between pans and the broil element. To move a rack, pull it out to the stop position, raise the front edge, and then lift it out. Use the
    following illustrations as a guide for positioning racks.

Maytag-MOES6027LZ00-Built-In-Electric-Single-Oven-User-Manual-Image-2

  1. Baking Layer Cakes on 1 Rack:
    Place the cakes on the rack as shown.
  2. Multiple Rack Cooking:
    2-rack: Use rack positions 2 and 5 for regular baking.
  3. Baking Layer Cakes on 2 Racks:
    For best results when baking cakes on 2 racks, use rack positions 2 and 5 with the Bake function. Place the cakes on the racks as shown.
  4. Baking Cookies on 2 Racks:
    For best results when baking cookies on 2 racks, use rack positions 2 and 5 with the Bake function.
  5. ALUMINUM FOIL (For Ovens Only):
    To avoid permanent damage to the oven bottom finish, do not line the oven bottom with any type of foil or liner. For best cooking results, do not cover entire oven rack with foil because air must be able to move freely. Care must be taken to prevent aluminum foil and meat probes from contacting heating elements.
  6. ALUMINUM FOIL AND METAL (For Microwave Ovens Only):
    Always use oven mitts or pot holders when removing dishes from the microwave oven. Aluminum foil and some metal can be used in the microwave oven. If not used properly, arcing (a blue flash of light) can occur and cause damage to the microwave oven.

OVEN VENT(S)

The oven vent(s) should not be blocked or covered since they allow the inlet of fresh air into the cooling system. Also,
the bottom vent should not be blocked or covered since it allows the inlet of fresh air into the cooling system and the outlet of hot air from the cooling system. Blocking or covering vents will cause poor air circulation, affecting cooking, cleaning and cooling results.

Maytag-MOES6027LZ00-Built-In-Electric-Single-Oven-User-Manual-Image-1

A.Control panel
B. Oven vent
C. Single oven or upper double oven
D. Upper oven
E. Oven vent
F. Lower oven
G. Bottom vent

OVEN LIGHTS

The oven lights are 120 V, 40 W maximum halogen bulbs. They will come on when the oven door is opened. On double oven models, both upper and lower lights will come on when either door is opened. The oven lights will not work during the Self-Cleaning cycle. When the door is closed, touch the appropriate Oven Light keypad to turn on the oven light.

To Replace:
Before replacing the bulb, make sure the oven is off and cool.

  1. Disconnect power.
  2.  Remove glass light cover by grasping the front edge and pulling away from oven.
  3.  Remove bulb from socket.
  4.  Replace bulb, using tissue or wearing cotton gloves to handle bulb. To avoid damage to or decreasing the
    life of the new bulb, do not touch bulb with bare fingers.
  5.  Replace bulb cover by snapping back into wall.
  6.  Reconnect power.

REFERENCE LINK

https://www.maytag.com/

Leave a Reply