MONSTER W2 ACHIEVE 1OO Wireless Earbuds User Manual
Product Overview
- Earphones (Left & Right)
- Charging Case
- SportClip™ x 3 Pairs (S, M & L)
- Eartips x 3 Pairs (S, M & L)
- Micro USB Charging Cable
- Quick Start Guide & Warranty Letter
- Carrying bag
- SportClip™
- LED Indicator
- Multi-Function Button (MFB）
- Charging Contacts
- Eartip
- Charging Case- Charging Port
- Charging Case – Battery level LED Indicator
Power On/Off
The earphones will automatically turn on when opening the charging case. To turn off the earphones, put them back in the charging case and close them. Earphones will be turned off and start charging. Experiment with the different sizes of ear tips to find your perfect fit.
Twist the earphone until it fits securely and comfortably.
Pairing
The earphones will turn on automatically when opening the charging case. Left and right earphones will be connected automatically. Wait for a few seconds, the “pairing” voice prompt will be heard. For a new device connection, go to the Bluetooth settings on your mobile device and set it to search for new devices. Once the earphone is paired, you will hear “connected”.
Volume Control
Volume down: quickly double-press the MFB on the left earphone during music streaming Volume up: quickly double-press the MFB on the right earphone during music streaming.
Calling Answer/End Call:
short press MFB button to answer/end the phone call Reject Call: Long press the MFB button about 2 seconds to reject the phone call.
Music Play/Pause:
Press MFB once to play/pause music Track forward: press and hold MFB on right earphone for about 2 seconds Track backward: press and hold MFB on left earphone for about 2 seconds.
Voice Control
After connecting to the phone, quickly double-press the MFB to activate the voice assistant.
LED Indicator Guide
| Status | Description | Voice Prompt |
| Power On | Blue LED indicator stays On about 1 second | “Power On” |
| Power Off | Red LED indicator stays On about 1 second | “Power Off” |
| Pairing | Blue and red LEDs flash alternately | “Pairing” |
| Connected | Blue LED indicator flashes every 6 seconds | “Connected” |
| Charging – Earphones | The Red LED indicator stays On | – |
| Charging – Charging Case | Battery level LED Indicator flashes while charging. When the battery level LED indicator is off, it is fully charged. | – |
Caution
ONLY use computer USB output or standard 5 volt only (500mA minimum) power adapter for charging. Damage may occur if a non-standard USB power adapter is used for charging. Do not charge if the connector and/or device is wet or damaged.
FCC Warning:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution:
Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 0cm between the radiator and your body.
