MONSTER XKH03 Wireless Headphone User Manual
Product Overview
- Headphones
- Audio Cable
- Charging Cable
- Manual
- Volume Up, Next Song
- Multi-Function Button (MFB) (Power on/off/Answer/Hang Up/Play/Pause /Last Number Redial……)
- Volume Down, Last Song
- 3.5mm Audio Port
- Bluetooth Indicator
- Type-C Charging Port
- Microphone
Product function parameters:
- Bluetooth version: V5.3
- Battery capacity: 600mAh
- Charging time: about 1.5 hours
- Standby time: about 100 hours
- Transmission distance: 10 meters
- Horn impedance: 32 Ω ±15%
- Frequency range: 20hz- -20khz
- Speaker size: 40mm
- Speaker sensitivity: 110dB ± 3dB
- Microphone sensitivity: -42dB ± 3dB
- Rated input: 5V 500mA
- Audio interface: AUX
- Running time: About 25 hours
Power On/Off
Press the MFB button to turn on the headphones, an ice blue indicator flashes, and the voice prompt “Power On” will be heard. Press the MFB button again to turn off headphones, red indicator flashes, and the voice prompt “Power Off” will be heard.
Pairing
The earphones will turn on automatically when opening the charging case. Left and right earphones will be connected automatically. Wait for a few seconds, the “pairing” voice prompt will be heard. For a new device connection, go to the Bluetooth settings on your mobile device and set it to search for new devices. Once the earphone is paired, you will hear “connected”.
Volume Control
Volume down: quickly double-press the MFB on the left earphone during music streaming Volume up: quickly double-press the MFB on the right earphone during music streaming.
Calling Answer/End Call:
short press the MFB button to answer/end the phone call Reject Call: Long press the MFB button for about 2 seconds to reject the phone call.
Music Play/Pause:
Press MFB once to play/pause music Track forward: press and hold MFB on right earphone for about 2 seconds Track backward: press and hold MFB on left earphone for about 2 seconds.
Voice Control
After connecting to the phone, quickly double-press the MFB to activate the voice assistant.
Audio Cable Operation:
The audio cable connects the device and the Bluetooth headset, and the headset automatically shuts down; Unplug the audio cable, you need to reboot, and then follow the above steps to pair and connect.
LED Guide to Indicator Lights
| Mode | Description | Indication | ||||
| Power On | The ice
flashing | blue | indicator | light | is | “Power On” |
| Power Off | The red indicator light is flashing | “Power Off” | ||||
| Pairing | Disconnected: red, ice, and blue indicator lights flashing alternately (automatically shuts down after 3 minutes) | |||||
| Connected | Ice blue LED flashes quickly | “Connected” | ||||
| Music Time | The ice | blue | indicator | light | is | |
| flashing | ||
| Call Time | The ice blue indicator light is
flashing | |
| Game Time | The ice blue indicator light is
breathing | |
| Charging status | Red indicator light on | |
| Charging
completed | Light out | |
| Low battery alarm
status | The red indicator flashes quickly | “Battery low” |
Listen Responsibly
To avoid hearing damage, make sure that the volume on your music player is turned down before connecting your headphones. After placing headphones in/on your ears, gradually turn up the volume until you reach a comfortable listening level. Noise levels are measured in decibels (dB), exposure to any noise at or above 85 dB can cause gradual hearing loss. Monitor your use; hearing loss is a function of loudness versus time. The louder it is, the less time you can be exposed to it.
The softer it is, the more time you can listen to it. Get the most out of your equipment and enjoy great audio performance even at safe levels. Our headphones will allow you to hear more details at lower volume levels than ever before. Learn how to establish a safe listening level and review other important safety guidelines from the Consumer Electronics Association at www.ce.org. Important information on how to prevent Noise-Induced Hearing Loss (NIHL) and a comprehensive list of which noises can cause damage can be found on the Deafness Research Foundation’s website, www.drf.org.
FCC Warning:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution:
Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 0cm between the radiator and your body.
