Monster XKT 10 Airmars Pro Wireless Bluetooth Headset Instruction Manual
Packing list
Product Schematic Description
Charge the charging case
Connect the charging case to the 5V power adapter with Type-C charging cable,
Tips: When the ice blue indicator flashes while closing the cover, please charge in time.
Indicator guide
Product operating instructions
- Power on
Method 1:Take out the headphones from charging case, the headphones will turn on automatically.
Method 2: Long press MB for 3 seconds. - Power off
Method 1: Put the headphones into the charging case and close the cover.
Method 2: After disconnected from the Bluetooth device for 3 minutes. - Pairing
Method 1:Take out the headphones from the charging case, the headphones will start pairing automatically.
Method 2: Search and click for “Monster Airmars XKT 10 Pro” on the bluetooth list of the smart device, and when connection is successful, “Connected” will be heard. - If the distance is exceeded, return to the effective distance within 3 minutes after disconnection, and automatically connect the device.
Note:
- If the product is not suitable for a long time, it should be fully charged and ensure that the device is in a shutdown state.
- After charging, please pull out the charging cable to avoid equipment damage caused by long-time charging.
Touch key operation
Key functions
During the call, the advantages of dual-MIC call noise reduction: It can effectively block the interference of external noise to your call, so that the other party can clearly hear your speech, and bring you a pleasant call experience
Restore factory settings
Either headphones is not connected to the Bluetooth device when turned on. click the MB 5 times to clear the previous pairing information and turn off.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesirec operation.
- Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. FCC ID:2A8PV-OSMTIOP
Precautions
- Headphones will turn on automatically (needless to press any button) pair and connect the device when the charging case is opened. After placing the headphones in the charging case, they will turn off and automatic charging will start when the cover is closed.
- Charging every 15 days will extend battery life when not in use often. Cleaning off dirt on the charging contacts by cotton swabs with alcohol will maintain a good contact for charging.
- Keep battery (battery pack) away from inflammables or excessive heat such as direct sunlight.
- Due to the wireless connection mode of this product, in the daily use process, influenced by the environment, mobile phone brand, usage behavior and other factors, it is normal that there may be a brief and slight sound delay in the process of playing music.
Warnings
- Do not use headphones at high volume for an extended period of time,
- Keep the headphones away from dust and water,
- Do not disassemble the headphones and accessories, otherwise warranty will be voided
- Keep headphones away from any impact or vibration.
- Do not use any chemical solvents or cleaning agent on the headphones.
Warranty service
Dear user, this warranty card is the proof of your future warranty application with the seller to fill it out and keep it for future use!
DOWNLOAD PDF LINK
https://manuals.plus/m/b399ff2778f4c013ba2cd72382ac0393dde461231ecf857b2389bed35e5095d6_optim.pdf
