VEHOP N35 TWS Gaming Wireless Earbuds User Manual

VEHOP N35 TWS Gaming Wireless Earbuds User Manual

Package Accessories

Overview

Product Parameters

1. Supports: A2DP1.3/AVCTP 1.4/AVDTP 1.3/HFP1.8/HSP 2.2
2.  Charging Cord Type: Type-C
3. Battery Capacity (Li-ion battery inside): Earbud-75 mAh, Charging case-2200mAh
4. Standby Time: Up to 250 hrs
5. Transmission Range: ≥33 feet (without obstacles)

Maintenance

After a period of use, the charging metal contacts of the earbuds may be contaminated with sweat and dirt,
resulting in the earbuds aren’t able to power on, charge, or having connection issues. Please use the cleaning swab to
remove dust or earwax from the charging contacts and the protective grille

First-Use

1. After you open the package for the first time use, please tears off the insulation film on the earbuds, then
   charge the both earbuds and charging case via supplied Type-C Charging Cable for at least 10 mins (or not in use for long time); do not take out the earbuds during this period.
2. Please select the suitable size for secure fit.

How to Wear?

• Step 1: Adjust sound holes downwards and push earbuds into your ears.
• Step 2: Slightly move earbuds to fit you best.

How to Pair?

1. Open the charging case and take the earbuds out, they will auto turn on and pair with each other in 5 seconds at the voice prompt “power on”.
2. One earbud flashes red and blue alternately to enter pairing mode.
3.  Search for “N35” and tap to connect on your phone.

How to Reset?

1. Turn off the bluetooth of all devices (make sure the earbuds are turned on and not connected).
2. Click the Multi-functional button of two earbuds for 5 times
3. Put the earbuds back into the charging case.
4. Take out the earbuds from the charging case and they enter pairing mode (one earbud will flash red and
   blue alternately to enter pairing mode).
5. Search for “N35” and tap to connect on your device.
6. If the reset fails, please repeat the above steps.

How to Charge?

Earbuds Charging

Earbuds start to charge only when you put the earbuds into the charging slot with right way. (You can charge the
charging case and earbuds at the same time, or you can charge charging case firstly then to charge the earbuds.)

1.  When being charged, earbuds’ LED light will illuminate red.
2.  When fully charged, the charging case will automatically stop charging and the earbuds’ LED red light will go
   off.

Charging Warning:
After using a period of time, the earbuds don’t charge or even can’t turn on because of oxidized magnet connector. You can handle this problem by using alcohol rag to clean the magnet connector on earbuds and charging case.

Type-C USB Charging:
There is a Type-C USB charging cable in the package, please use it to charge the case directly. After being fully charged, the number is displayed as 100. The right display panel indicates the charging status per earbud. 

Wireless Charging
Easy to charge your charging case without cables, just put your charging case on the wireless charging pad. (Wireless Charging Pad Not Included)

For Call

For Music

Troubleshooting Guide

1. Then forget all bluetooth devices on your phone bluetooth menu and turn off the bluetooth of all your mobile phones.
2.  Take out of the two earbuds from the charging case at the same time, waiting for a while, if one earbud flash
   red and blue alternately, it means two earbuds pair with each other successfully.
3. Open the bluetooth of your mobile phone, search “N35″ to connect, both earbuds will have prompt” connected”.

FCC Warning Statement

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s
authority to operate the equipment. This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation.

1. Reorient or relocate the receiving antenna.
2.  Increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
4.  Consult the dealer or an experienced radio/TV technician for help.