Microlife NC-150 Infrared Non Touch Thermometer User Guide

Microlife NC-150 Infrared Non Touch Thermometer User Guide

Parts Description

1. Measuring sensor
2.  Tracking light
3.  Display
4.  START button
5.  ON/OFF button
6.  Mode switch
7. Battery compartment cover
8. M-button (memory)
9.  All segments displayed
10. AT Memory
11. AK Ready for measuring
12. AL Measurement complete
13. AM Body mode
14. AN Object mode
15. AO Low battery indicator
16. AP Changing between Celsius and Fahrenheit
17. AQ Recall mode
18. AR Recall the last 30 readings
19. AS Measured temperature too high
20. BT Measured temperature too low
21. BK Ambient temperature too high
22. BL Ambient temperature too low
23. BM Error function display
24. BN Blank display
25. BO Flat battery
26. BP Date/Time
27. BQ Beeper function setting
28. BR Replacing the battery

The Advantages of this Thermometer

Measures in a matter of seconds
The innovative infrared technology allows the measurement without even touching the object. This guarantees safe and sanitary measurements within seconds.

•  Milk surface temperature in a baby’s bottle
• Surface temperature of a baby’s bath
•  Ambient temperature

Accurate and reliable
The unique probe assembly construction incorporates an advanced infrared sensor, ensuring that each measurement is accurate and reliable.

Gentle and easy to use

•  The ergonomic design enables simple and easy use of the thermometer.
•  This thermometer is quick, therefore child-friendly.

Important Safety Instructions

1. Follow instructions for use. This document provides important product operation and safety information regarding this device. Please read this document thoroughly before using the device and keep for future reference.
2.  This device may only be used for the purposes described in these instructions. The manufacturer cannot be held liable for damage caused by incorrect application.
3. Never immerse this device in water or other liquids. For cleaning please follow the instructions in the «Cleaning and disinfecting» section.
4. Do not use this device if you think it is damaged or notice anything unusual.
5.  Never open this device.
6.  A basic physiological effect called vasoconstriction can occur in the early stages of fever, resulting in a cool skin effect. The recorded temperature using this thermometer can, therefore,
   be unusually low.
7.  If the measurement result is not consistent with the patient’s finding or unusually low, repeat the measurement every 15 minutes or double check the result by another core body temperature measurement

Control Displays and Symbols

•  All segments displayed 9: Press the ON/OFF button 5 to turn on the unit; all segments will be shown for 1 second.
•  Ready for measuring AK: When the unit is ready for measuring, the «°C» or «°F» icon will keep flashing while the mode icon (body or object) will be displayed.
• Measurement complete AL: The reading will be shown on the display 3 with the «°C» or «°F» icon and the mode icon steady.
•  Low battery indicator AO: When the unit is turned on, the  icon will keep flashing to remind the user to replace the batteries.

Setting Date, Time and Beeper Functions

Setting the date and time

1. You can set the year by pressing the START button To confirm and then set the month, press the M-button 8.
2.  Press the START button 4 to set the month. Press the M button 8 to confirm and then set the day.
3.  Follow the previously mentioned instructions to set the day, 12 or 24 hour mode, hours and minutes.

Setting the beeper

1. Press the ON/OFF button 5 again to either turn the beeper on or off.

Changing between Body and Object Mode

For changing from body to object mode, slide the mode switch 6 at the side of the thermometer downwards. For switching back to body mode, slide the switch up again.

 Directions for Use

Measuring in body mode

1. Press the ON/OFF button 5.
2.   After 3 seconds a long beep will verify the completion of measurement.
3.  Read the recorded temperature from the LCD display.

Measuring in object mode

1.   Press the START button 4. After 3 seconds a long beep will verify the completion of measurement.
2. Read the recorded temperature from the LCD display.

Changing between Celsius

To switch the display between °C and °F, simply turn OFF the unit, press and hold the START button 4 for 5 seconds; after 5 seconds, the current measurement scale («°C» or «°F» icon) will flash on the display AP. Change the measurement scale between °C and °F by pressing the START button 4.

 How to recall 30 readings in Memory Mode

• Recall mode AQ: Press the M-button 8 to enter recall mode when the power is off. The memory icon «M» will flash.
• Reading 1 – the last reading AR: Press and release the M button 8 to recall the last reading.
•  Reading 30 – readings in succession: Press and release the M-button 8 consecutively to recall the last 30 readings in succession.

Cleaning and disinfecting

Use an alcohol swab or cotton tissue moistened with alcohol (70% Isopropyl) to clean the thermometer casing and the measuring sensor. Ensure that no liquid enters the interior of the device. Never use abrasive cleaning agents, thinners or benzene for cleaning and never immerse the device in water or other cleaning liquids. Take care not to scratch the surface of the sensor lens and the display.

REFERENCE LINK

https://www.microlife.com/