Nesco ES-08 Electric Skillet User Manual

Nesco ES-08 Electric Skillet User Manual

IMPORTANT SAFEGUARDS

This product is designed for household use only – When using electrical appliances, basic safety precautions should always be followed, including the following:

1. READ ALL INSTRUCTIONS.
2. Do not touch hot surfaces. Use handles or knobs.
3. To protect against electrical shock and personal injury, do not immerse this appliance, including cord and plug, in water or other liquid.
4. Close supervision is necessary when any appliance is used by or near children.
5. Unplug from the outlet when not in use and before cleaning. Allow to cool completely before putting on or taking off parts, and before cleaning.
6. Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions or has been damaged in any manner. To avoid hazards, return the appliance to NESCO® Factory Service Department for examination, repair, or adjustment.
7. The use of accessory attachments not recommended by the manufacturer may result in fire, electric shock, or injury to persons.
8. Do not use outdoors.
   

   Continued

9. Do not let the cord hang over the edge of the table or counter, or touch hot surfaces.
10. Do not place on or near a hot gas or electrical burner or in a heated oven.
11. Do not place on or near a hot gas or electric burner, or in a heated oven.
12.  Do not use this appliance in rain or wet conditions.
13.  Do not pour water over or direct a stream of water directly at the motor drive.
14.  To avoid ELECTROCUTION HAZARD!
15. Do not plug into the outlet if your hands are damp or wet. Dry hands first.

SAVE THESE INSTRUCTIONS

Polarized Plug:
This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, the plug is intended to fit into a polarized outlet only one way. If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not try to modify the plug in any way. DO NOT USE WITH AN EXTENSION CORD

WARNING:
SERIOUS HOT OIL BURNS MAY RESULT FROM A DEEP FRYER (COOKER/FRYER, SKILLET, OR FRY PAN) BEING PULLED OFF A COUNTER. DO NOT ALLOW THE CORD TO HANG OVER THE EDGE OF THE COUNTER WHERE IT MAY BE GRABBED BY CHILDREN OR BECOME ENTANGLED WITH THE USER. DO NOT USE WITH AN EXTENSION CORD.

Parts

How to assemble your electric skillet

Remove all parts from the packaging.

1. Locate and remove Lid Knob from the packaging.
2. Place the screw through the center hole of the lid. The head of the screw to the inside of the lid.
3. Place the Protector Ring over the screw threads on the outside of the lid. Rough side of ring facing glass.
4. Turn Lid Knob onto the screw thread while pressing on the head of the screw.
5. Tighten the screw until snug.

Before first use

1. Read and follow all instructions and save for reference.
2. Remove all packaging and labels.
3. Clean all parts following instructions in the ‘Care and Cleaning’ section.
4. Wipe the base with a damp cloth.

Operation

1. Place the appliance on a flat, heat-resistant, stable surface in a ventilated area.
2. Make sure the temperature control is in the OFF position. Insert the control into the inlet on the side of the skillet. Then insert the plug into an electrical outlet
3.  Adjust the control to the desired setting. NOTE: The signal light on the control indicates heat setting. When the desired setting is reached, the light will turn off. It will continue to cycle on and off during use to indicate heat setting is being automatically maintained.
4. Preheat the skillet with the lid on for 10 minutes or until the indicator light goes out. NOTE: The cooking temperatures listed in this user manual are estimates. Adjust the cooking temperature slightly up or down to achieve the results you prefer.
5. A steam vent is located on the glass lid. The steam vent allows steam to escape while cooking with the lid in place. CAUTION: Escaping steam is hot! Be careful while removing or lifting the lid.
6. Place food directly onto the cooking surface or rack and cook to the desired doneness.
7. When finished cooking, turn the controller to OFF and remove the plug from the power outlet. IMPORTANT: To avoid burn injury, wait until the appliance has cooled before removing the temperature control.

NOTE:
If heating oil, always leave the lid off. If the oil smokes, immediately turn the skillet “OFF” and allow it to cool.

Care and Cleaning Instructions

1. Turn the temperature control to OFF and unplug the cord from the power outlet.
2. Always allow the appliance to cool completely before cleaning and removing the temperature controller.
3. Remove the temperature control from the unit and wipe clean with a dry towel. NEVER IMMERSE TEMPERATURE CONTROL IN WATER OR ANY OTHER LIQUID.
4.  Allow the base to cool completely before cleaning. Absorb any excess water or grease from the base with a paper towel.
5.  Do not immerse the skillet in water or any other liquid or place it in the dishwasher. The skillet should be wiped with soapy water and dried with a soft cloth. The lid can be washed in soapy water or is dishwasher safe. NOTE: Do not use steel wool, abrasive cleaners, or metal scouring pads for cleaning this appliance.
6. Do not use metal utensils they may scratch the non-stick surface.

Cooking Tips

• Before using the skillet for the first time, lightly brush the cooking surface with vegetable oil. Heat, uncovered, to 300°F. Turn “OFF” and allow time to cool completely. Wipe away excess oil.
• This skillet is not designed for deep frying.
• To pan-fry, do not use more than 4 cups of oil. Select a vegetable oil or peanut oil for frying.
• Butter and olive oil should only be used to sauté foods in a lower temperature setting.
• Do not attempt to cool the heated cooking surface by pouring cold water into the skillet. The sudden temperature change may cause the cooking surface to warp.
• Do not immerse the temperature-control probe, cord, or plug in water or any other liquid.
• Make sure that the temperature control inlet, located on the side of the skillet, is completely dry prior to use.

ONE-YEAR LIMITED WARRANTY

This appliance is warranted for one year from the date of original purchase against defects in material and workmanship. This warranty does not cover transportation damage, misuse, accident, or similar incident. This warranty gives you specific legal rights and you may have other rights, which vary from state to state.

This product is intended for household use only, not for commercial use. The warranty does not cover commercial use. Your new NESCO® appliance comes equipped with numerous safety features. Any attempt to interfere with the operation of these safety features makes this warranty null and void.

Must include proof of purchase or copy of original bill of sale when returning the product for warranty service.

• For service in the warranty, follow the instructions set forth in the warranty.
• Call us on our toll-free number, 1-800-288-4545, and tell us about your problem.
• If we instruct you to send all or part of your appliance to us for repair or replacement, our Customer Satisfaction representative will provide a Return Authorization number (this number notifies our receiving department to expedite your repair).
• Print your name, address, and Return Authorization number on the carton.
• Write a letter explaining the problem.
• Attach the sealed envelope containing the letter inside the carton. Insure the package for the value of the NESCO® appliance and ship prepaid to:
  Attn: Factory Service Dept.
  The Metal Ware Corporation
  1700 Monroe Street
  Two Rivers, WI 54241

REFERENCE LINK