Nespresso N120U USB Dual Camera Video Conferencing Bar User Guide

Nespresso N120U USB Dual Camera Video Conferencing Bar User Guide

Nexvoo Double View N120U Collaboration System

Double View N120U is a compact and highly capable meeting device designed and engineered for a medium-sized conference room. The Double View N120U is a Dual-Cam all-in-one USB video bar that includes combination of cameras (ultra-wide and telephoto lenses), high quality speaker, and 8 microphone arrays. Double View N120U supports 4K ultra-definition video calls, and integrates multiple AI technologies such as auto-framing, and speaker tracking. It allows you to experience the real large-scale conference room-level audio and extremely shocking video effects in a medium-sized conference room.

Package Includes

Endpoint Installation

Put on a flat surface 

Mount on a wall

• Mount the Double View N120U below the TV when the mounting height of the lower side of the TV is higher than 3.937  ft(120 cm).
• Mount the Double View N120U above the TV when the mounting height of the upper side of the TV is lower than 3.937 ft(120 cm).

Adjusting the Camera Tilt

Web Management

You can configure the Nexvoo Double View USB video bar on the Web management. You can configure the following settings on the Web management.

• View device information
•  The remote control configuration
• Camera tracking
•  Firmware update & reset
• Change password
• Restore default settings

Note: Web management only supports Windows system.

1.  After Double View is connected to the power, it will automatically turn on, and connect Double View to your computer via USB. The computer will automatically install Double View USB Audio, USB Camera and Remote NDIS drivers, then open the computer’s Device Manager to view the installed USB devices. (Set Windows 10 system as example).
2. Select [Computer’s Control Panel – Network and Internet – View Network Status and Tasks – Change Adapter Settings], you can see the Ethernet with the device name “Remote NDIS based Internet Sharing Device”, right-click the Ethernet, select “Properties”, and open [Network-Internet Protocol Version 4 (TCP/ IPv4)], then manually configure the IP address.

• IP address: 172.16.110.7
•  subnet mask: 255.255.0.0
• Default gateway: 172.16.255.255

Login Web management

1. Start the browser, enter http://172.16.110.6 to open the login interface of the Double View Web management platform.
2. Enter the username and password, click “Sign in” to login to the web management platform. (Default username: Admin, Password: 123456)

View device information
You can view the basic information for your Double View USB device through Web Management platform.

Procedure

1. Login to the web management platform through a browser.
2.  In the Dashboard section, view the basic information for your Double View USB device.

The remote control configuration
You can clear the paired remote control in Bluetooth Settings menu through the web management platform.

Procedure

1.  Login to the web management platform through a browser.
2. Go to General Settings – Bluetooth Settings.
3. Click “Clear Remote Control” button to clear the paired remote control, then you can pair and connect a
   new remote control.

Update the Double View USB device
You can update the firmware of the Double View USB device through Web Management platform.

1. Login to the web management platform through a browser.
2.  Go to System Settings – Firmware Update.
3. Firmware Update includes MCU update and system update.

Change your password

1. Login to the web management platform through a browser.
2.  Go to System Settings – Change Password.
3.  Enter your Current Password.
4. Enter a new password in New Password and Confirm Password fields.
5. Click Save.

Restore default settings
You can erase all configuration and restore the Double View USB video bar default setting through Web Management platform. The default settings to be cleared include but are not limited to:

•  Password
• Remote control presets
•  Camera tracking
•  Audio settings
• Bluetooth settings

Product Information

Dimensions

• 3.9 x 19.9 x 2.8 inches (H x W x D)
• 98 × 505 x 72 mm (H x W x D)

Weight

• 3.97 lbs / 63.5 oz (1.8 kg)

Camera Specs

•  Video Resolution
• UHD 4K@30fps
• FHD 1080p@30fps
•  HD 720p@30fps
• Ultra wide-angle camera
•  8M pixels
• f/1.8 Aperture
•  5x digital zoom / EPTZ
• 120° wide-angle field of view
•  4K capture resolution
•  Telephoto camera
•  8mm focal length
•  3x digital zoom
•  52° field of view

General Specs

• 16ft/5m detachable USB cable for PC or Mac-based video conferencing
•  Works with most video conferencing applications
•  Bluetooth Button
• Kensington Security Slot

Audio Specs

• Support full-duplex conversations, acoustic echo cancellation and background noise suppression
• Mute / Unmute controls

Microphone:

•  8-element beam forming microphone arrays
• 26 ft / 8m pickup range
•  120 Hz–16 kHz frequency response

 Speaker:

• 100Hz-20KHz Frequency response
•  Output = 95 dB @ 0.5 m

System Requirements

• Windows 7/ 8.1/ 10
• Mac OS 10.15 or higher
• Chrome OS
•  Android 6.0 or higher 19

Connector

• 1 x USB Type-C
•  2 x USB Type-A

REFERENCE LINK

https://www.nexvoo.com/