NetumScan C Series Upgraded Mini Wireless Barcode Scanner User Guide
Package Included:
- 1PC X Scanner;
- 1PC X 2.4G USB Receiver;
- 1PC X USB Cable;
- 1PC X Quick Setup Guide
Product Information
Barcode Programming
Netum barcode scanners are factory programmed for the most common terminal and communications settings. If you need to change these settings, programming is accomplished by scanning the bar codes in this guide. An asterisk (*) next to an option indicates the default setting.
Working Via USB Cable
- Get Started: Connect scanner with your device via USB cable. If you use US keyboard, it’s plug and play. If you use other type of keyboard , please refer to “keyboard language” to configure the keyboard language before you use it.
Working Via USB Dongle
- Get Started: Plug the USB dongle on your computer. If you use US keyboard, it’s plug and play. If you use other type of keyboard , please refer to “keyboard language” to configure the keyboard language before use it.
Important Notes:
- Make sure the device is in range with Bluetooth turned on.
- Pressing the scan button will initiate the attempts to connect.
- If a connection is made, the blue light will stop blinking and turn solid.
- If a connection is not made after several attempts, the scanner will emit a long beep (and the blue light will turn off).
- Bluetooth working channel is not set by default.If you want to work via bluetooth, you have to scan command barcode of “Working via bluetooth” before pairing. If you want to shift from bluetooth working channel to RF Wireless channel, you have to scan “ RF Wireless Transmit” then plug the USB receiver into your device.
USB DONGLE AS HID-KBW
When you plug the USB dongle to your device, USB HID-KBW feature will be enabled by default. Then scanner’s transmission will be simulated as USB key-board input. It works on a Plug and Play basis and no driver is required.
USB DONGLE AS VIRTUAL COM
USB COM Port Emulation
If you connect scanner to the Host via USB dongle, by scanning “USB COM Port Emulation” will allow your device to receive data in the way as a serial port does.
USB HID-KBW
When scanner is connected to your device via USB cable , USB HID-KBW feature will be enabled by default. Then scanner’s transmission will be simulated as USB key-board input. It works on a Plug and Play basis and no driver is required.
USB COM Port Emulation
If you connect the scanner to your device via USB cable, by scanning “USB COM Port Emulation” will allow your device to receive data in the way as a serial port does.
Working Mode
If you are heading for a working area which lies outside the Bluetooth signal range, you may activate scanner’s store mode, following steps described below. Under this mode, all scanned data will be stored directly into the buffer memory of the device. Furthermore, data entries will be permanently saved in the buffer memory prior to the manual upload into the working station, so that you may upload them when you are near your working device.
Bluetooth Connection
| Bluetooth LED Activity | Beep Pattern | Read indicator LED Activity (Square Shape) | Indication | Working Mode |
| OFF | No beep | OFF | Sleeping /Power OFF | |
| Blue LED ON and then OFF | Beep Once | Blue LED ON and then OFF | Go to sleep Mode | |
| Blue LED ON | Beep Once | Blue LED ON and then OFF | successful scan | Normal Mode |
| Blue LED Flashing | Beep Once | OFF | Bluetooth Pairing | |
| Solid Blue LED (No Flashing) | Beep Once | Blue LED ON and then OFF | Bluetooth Paired | |
| Blue LED Flashing | 3 Beeps | Red LED Flashing 3 times and then Off | Data transmit failed | |
| Blue LED ON and then OFF | Beep Once | Blue LED ON and then OFF, Green LED Flashing | successful scan | Store Mode |
Charge Power
| Bluetooth LED Activity | Beep Pattern | Read indicator LED Activity (Square Shape) | Indication | Working Mode |
| OFF | 5 beeps | RED LED flashing 5 times | Low Power Warning | |
| OFF | No beep | RED LED ON | Charging Power | |
| OFF | No beep | Green LED ON | Full Charge | |
FAQ
- Some barcodes cannot be read, why ?
a. Dirty or unclear barcodes might not be read.
b. The possible reason is that setting for some barcode types not commonly used is off by default. You need to activate a special barcode type to get it to work. Please contact us for
help or you may go to our official website “www.netum.com” to download the complete manual and then refer to the section of “Symbologies”. - How to change terminator to TAB ?
Please refer to the section of “Terminator configuration” from the manual downloaded from our official website. - Are there any barcodes for applying or removing prefix & suffix ?
Yes, you may go to our official website “www.netum.com” to download the manual ,refer to the section of“ prefix and suffix” or turn to customer service for help. - How to solve the messy code problem encountered while using other foreign languages?
The default language is English. Please refer to “Keyboard Language” to change the language. - Why scanner can not read Italy Pharmacy code?
Download the manual from our official website according to the scanner’s model number, refer to the section of Code 32 then scan “Enable Code 32” to enable the scanner to read Italy pharmacy code. - Why scanner can not read data matrix GS1 in a correct format ?
Scan “Enable Function Key Mapping” from this manual will enable scanner to output group separator.