Insignia NS-CFR25C2 Retro Mini Fridge Manual

Insignia NS-CFR25C2 Retro Mini Fridge Manual

Additional safety instructions

• Disconnect the refrigerator from the main power supply at the rear of the unit, remove the refrigerator circuit fuse, or turn off the circuit breaker before making repairs or cleaning.
• NOTE: Power to the refrigerator cannot be disconnected by any setting on the control panel.
• NOTE: Repairs must be performed by a qualified Service Professional.
• Replace all parts and panels before operating.
• Do not store explosive substances such as aerosol cans with a flammable propellant in this appliance.
• To avoid serious injury or death, children should not stand on, or play in or with the appliance.
• Children and persons with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, can use this appliance only if they are supervised or have been given instructions on safe use and understand the hazards involved.
• This appliance is intended to be used in households and similar applications, such as staff kitchen areas in shops, offices, and other working environments; farm houses; by clients in hotels, motels, bed & breakfasts,s and other residential environments; catering and similar non-retail applications.
• Do not apply harsh cleaners to the refrigerator. Certain cleaners will damage plastic which may cause parts such as the door or door handles to detach unexpectedly. See Maintaining your Refrigerator on page 13 for detailed instructions.

Grounding requirement
Your refrigerator must be grounded. Your refrigerator is equipped with a cord having a grounding wire with a grounding plug. The plug must be inserted into an outlet that is correctly installed and grounded. Incorrect use of the grounding plug can result in a risk of electric shock. Consult a qualified electrician or service person if the grounding instructions are not completely understood, or if doubt exists as to whether your refrigerator is correctly grounded.

Features 

• 2.5 Cu. Ft. (.07 cu m) storage capacity gives you space for your essentials
• Two glass shelves, a can rack, and a gallon bottle holder help organize your items
• The attached bottle opener helps open your favorite beverages in seconds
• Eye-catching blue color and an old-fashioned handle add vintage flair to your home décor

Package contents

• 2.5 Cu. Ft. Retro Compact Refrigerator
• Handle Kit
• Bottle opener with two screws
• User Guide

Dimensions

Refrigerator parts Outside

Inside

Installing the door handle

CAUTION:
If you lay your refrigerator on its back or side for any length of time, wait for six hours after you stand it up again before you plug it in. Otherwise, you may damage internal components.

1. Remove the handling package from the refrigerator.
2. Push the handle horizontally onto the base until it clicks into place.
   
3. Try the handle to make sure that it is installed correctly.

Installing the bottle opener
You need the following tool to attach the bottle opener:

Use a Phillips screwdriver to remove the two screws from the left side of your refrigerator, then use the screwdriver and the two screws to attach the bottle opener to the side of your refrigerator.

Installing your refrigerator

Before using your refrigerator 

• Remove the exterior and interior packing.
• Let your refrigerator stand upright for approximately four hours before connecting it to power. This reduces the possibility of a malfunction in the cooling system from incorrect handling during transportation.
• Clean the interior surface with lukewarm water and baking soda solution (two tablespoons of soda in a quart of water) using a soft cloth, then wipe down with a dry cloth.

Finding a suitable location

• Place your refrigerator on a floor that’s strong enough to support your refrigerator when it is fully loaded.
• Allow 5 in. (12.7 cm) of space between the back and sides of your refrigerator and any surrounding walls. This allows for the correct air ventilation. Adjust the feet to keep your refrigerator level.
• Locate your refrigerator away from direct sunlight and sources of heat (stove, heater, radiator, and so on). Direct sunlight may affect the acrylic coating and heat sources may increase electrical consumption. Ambient temperature below 50° F (10° C) or above 85° F (29.4° C) hinders the performance of your refrigerator. Your refrigerator is not designed for use in a garage or any other outside installation.
• Avoid locating your refrigerator in moist areas.

Connecting power

Check your local power source. Your refrigerator requires a 110 V ~ 120 V, 60 Hz power supply. Your refrigerator should be correctly grounded for your safety. Use a receptacle that accepts the grounding prong. The power cord is equipped with a 3-prong (grounding) plug which mates with a standard 3-prong (grounding) wall outlet to minimize the possibility of electric shock hazards from your refrigerator.

CAUTIONS:

• Do not, under any circumstances, cut or remove the third ground prong from the supplied power cord.
• Your refrigerator is not designed to be used with an inverter.
• The power cord should be secured behind your refrigerator, and not left exposed or dangling, to prevent accidental injury.
• Never unplug your refrigerator by pulling on the power cord. Always grip the plug firmly and pull it straight out from the outlet.
• Do not use an extension cord with your refrigerator. If the power cord is too short, have a qualified electrician or service technician install an outlet near your range. The use of an extension cord can negatively affect the performance of your refrigerator.

Leveling your refrigerator

Your refrigerator must be level in order to function correctly. If your refrigerator is not leveled during installation, the door may not close or seal correctly, causing cooling, frost, or moisture problems.

• Rotate the leveling feet clockwise (to lower) your refrigerator or counterclockwise (to raise).

Note: To make it easier to adjust the feet, have someone push against the top of your refrigerator to tilt it slightly.

Using your refrigerator

1. The first time you turn your refrigerator on, adjust the control to 4 and let your refrigerator cool for at least four hours before putting food inside. This makes sure that the cabinet is thoroughly chilled before you put food in.
   
2. After your refrigerator is fully chilled, test the temperature and adjust towards 1 to make it warmer or towards 7 to make it cooler, as needed. The 4 settings should be appropriate for home or office refrigerator use.
3. To turn off the cooling function, turn the temperature control knob to 0.

Note:

• Setting the temperature control to 0 stops the cooling cycle, but doesn’t disconnect the power. To disconnect the power, unplug the power cord.
• The internal temperature of your refrigerator can vary based on ambient temperature, the number of items stored, and how frequently the door is opened.

Adjusting the shelf
Your refrigerator has two shelves. The top shelf is adjustable. The bottom shelf is fixed.

1. Open the refrigerator door all the way.
2. Lift the back of a shelf, then pull it out.
   
3. To reinstall the shelf, align the shelf above the shelf rails with the back of the shelf tilted up. Slide the shelf onto the rails, then lower the back.

Maintaining your refrigerator

Your refrigerator is designed for year-round use with only minimal cleaning and maintenance. When you first receive it, wipe the cabinet with mild detergent and warm water, then wipe dry with a dry cloth. Do this periodically to keep your refrigerator looking new.

Cleaning your refrigerator

CAUTION:
To prevent damage to the finish:

• Don’t use gasoline, benzine, thinner, or other similar solvents.
• Don’t use abrasive cleaners.
• Don’t use sharp objects because they are likely to scratch the surface.

We recommend that you do the following every time you clean your refrigerator to keep it running odor-free and efficiently:

1. Unplug your refrigerator from the power outlet.
2. Remove all food.
3. If you want to remove the shelf.
4. Clean the door, handle, and cabinet surfaces with mild detergent, then rinse with warm water using a wrung-out sponge or cloth.
5. Make sure that you keep the door gasket (seal) clean so that the door seals tightly. Use a clean towel and water to wipe every part of the door seal. This helps your refrigerator run efficiently.

Shutting down your refrigerator

1. Turn the temperature control on your refrigerator to the 0 settings, then unplug your refrigerator from the power outlet.
2. Remove all food.
3. Clean your refrigerator.
4. Leave the door open slightly to avoid the possible formation of condensation, mold, or odor.

Moving your refrigerator

1. Turn the temperature control on your refrigerator to the 0 settings, then unplug your refrigerator from the power outlet.
2. Remove all food.
3. Securely tape down all loose items inside your refrigerator.
4. Tape the doors shut.
5. Make sure that your refrigerator stays in the upright position during transportation.

Troubleshooting

Specifications

ONE-YEAR LIMITED WARRANTY – INSIGNIA

Definitions:
The Distributor* of Insignia branded products warrants to you, the original purchaser of this new Insignia-branded product (“Product”), that the Product shall be free of defects in the original manufacturer of the material or workmanship for a period of one (1) year from the date of your purchase of the Product (“Warranty Period”). For this warranty to apply, your Product must be purchased in the United States or Canada from a Best Buy branded retail store or online at www.bestbuy.com or www.bestbuy.ca and is packaged with this warranty statement.

If service of Products or parts are required after the Warranty Period expires, you must pay all labor and parts charges. This warranty lasts as long as you own your Insignia Product during the Warranty Period. Warranty coverage terminates if you sell or otherwise transfer the Product.

REFERENCE LINK

https://www.insigniaproducts.com/pdp/NS-CFR25C2/6445077

DOWNLOAD LINK

User+Guide_compressedUser+Guide_compressed