Nuwavenow 37380 Digital Air Fryer Owner Manual
PARTS & ACCESSORIES
ASSEMBLY GUIDE
Assembling the Brio
CAUTION: DO NOT use the Brio without the Base Tray.DO NOT touch the inside of the Base Tray, the Reversible Rack, or the Riser immediately after cooking. These parts will be hot. ONLY hold the Base Tray by the handle.Removing the Base Tray & Air Circulation Riser.
- Using the handle, pull the Base Tray straight out.
Allow the Base Tray to cool. Grasp the Circulation Riser by the central handle and pull it straight up to remove it from the Base Tray.
Allow the Base Tray to cool. Grasp the Circulation Riser by the central handle and pull it straight up to remove it from the Base Tray.
GENERAL USE INSTRUCTIONS
Getting Started
Plug the power cord into an electrical outlet.
- Press the Power button to turn the Brio on and off and to cancel.
- Insert your food into the Base Tray and slide it into the Brio.
- Adjust the temperature and time by pressing the Up and Down arrows.
- The default cooking time and temperature is 15-minutes at 350F.
- Press the START/PAUSE button to begin cooking.
Mute and unmute the beep sounds. To mute the beep sounds, press and hold the SEAR + STAGE buttons for 1 second. The Brio will remain mute until
Press SEAR + STAGE for 1 second again to unmute.
Adjust the cooking temperatures
- To set a different cooking temperature,press the Up and Down arrows above and below the temperature icon.
- The temperature will adjust in 5-degree increments between 50F and 400F.
- You can quickly adjust the temperatures by holding down the Up and Down arrows.
- To set a different cooking temperature,press the Up and Down arrows above and below the temperature icon.
CLEANING & MAINTENANCE
Cleaning
Clean the Brio after every use or in between batches. The Base Tray and Air Circulation Riser have a non-stick coating.Do not use metal utensils or harsh abrasives when cleaning as these can damage the coating.
- Unplug the appliance and make sure it cools completely.
- Use a damp cloth to wipe the outside of the appliance.
- Clean the Base Tray and inside components with a nonabrasive sponge, hot water, and mild detergent.
Note: Remove the Base Tray and place it on a heat resistant surface to help cool the appliance faster. If using the dishwasher for the Base Tray, Air Circulation Riser, and Rack, use the top rack only.
Tip: If there is residual food on the Base Tray, Air Circulation Riser, and Rack, add some hot water and let them soak separately for about 10 minutes for easier cleaning. Then,use a soft cleaning brush to remove any lingering food.
Storage
- Unplug the Brio and let it cool down completely.
- Make sure that all the parts are clean and dry.
- Push the power cord into the storage capsule. Affix the cord by inserting it into the cord-affixing opening in the back of the Brio.
IMPORTANT – Do not immerse the Brio in water or attempt to cycle the appliance through the dishwasher. The outer surface may be cleaned by wiping
carefully with a damp dishcloth or sponge.
Cleaning Silicone Tabs
The Air Circulation Riser comes with 4 Silicone Tabs. You may need to clean the tabs as residue might accumulate.
- Let the Air Circulation Riser cool.
- Grasp the Air Circulation Riser by the central handle and pull it straight up to remove it from the Base Tray.
- Carefully pull the Silicone Tabs up to slide them off the metal tabs, then pull each of them out.
Note: Wash the Air Circulation Riser and Silicone Tabs with soapy warm water and sponge.
TROUBLESHOOTING
French fries are fried unevenly in the Brio.
- You did not soak the potato sticks properly before air-frying them.
- You did not use the right potato type, or they were not fresh.
Soak the potato sticks in a bowl of water for at least 30 minutes, remove them, and dry them with paper towels. Use fresh potatoes and make sure they stay firm during air-frying.
French fries are not crispy when they come out of the Brio.
- The crispiness of the fries depends on the amount of oil and water in the fries. Make sure you dry the potato sticks properly before adding oil. Cut the potato sticks smaller and dry them for a crispier result. Put slightly more oil on the potatoes before placing them in the Brio for crispier results.
If the Brio needs to be replaced or returned to the manufacturer, please contact NuWave
Customer Service at: 1-888-502-7807 or emailing support@ nuwavenow.com (Mon-Fri 7:30am-4:30pm CST).
LIMITED WARRANTY
The NuWave Brio® 7.25Q Digital Air Fryer THE MANUFACTURER WARRANTS The Brio, including the Base Tray, Air Circulation Riser, and Reversible Rack, are to be free from manufacturer defects. All electrical components are warrantied for 1 year from the date of purchase, under normal household use, and when operated in accordance with the Manufacturer’s written instructions. The Manufacturer will provide the necessary parts and labor to repair any part of the Brio at NuWave LLC Service Department. After the expiration of the warranty, the cost of the labor and parts will be the responsibility of the owner.
MANUFACTURER’S OBLIGATION
The Manufacturer’s obligation under this Limited Warranty is limited, to the extent allowable by law, to repairing or replacing any part covered by this Limited Warranty which upon examination is found to be defective under normal use. The Limited Warranty is applicable only within the continental United States and only to the original purchaser of the manufacturer’s authorized channels of distribution. THE LIMITED WARRANTY MAY NOT BE ALTERED, VARIED OR EXTENDED EXCEPT BY A WRITTEN INSTRUMENT EXECUTED BY THE MANUFACTURER. THE REMEDY OF REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS LIMITED WARRANTY IS EXCLUSIVE. IN NO EVENT SHALL THE MANUFACTURER BE LIABLE FOR ANY CONSEQUENTIAL OR INCIDENTAL DAMAGES TO ANY PERSON, WHETHER OR NOT OCCASIONED BY NEGLIGENCE OF THE MANUFACTURER, INCLUDING WITHOUT LIMITATION, DAMAGES FOR LOSS OF USE, COSTS OF SUBSTITUTION, PROPERTY DAMAGE, OR OTHER MONEY LOSS.
THE MANUFACTURER WARRANTS
he Manufacturer will provide the necessary parts and labor to repair any part of the Brio at NuWave LLC Service Department. After the expiration of the warranty, the cost of the labor and parts will be the responsibility of the owner.
