NUWAVE Brio Digital Air Fryer Owner Manual
PARTS & ACCESSORIES
ASSEMBLY GUIDE
Assembling the Brio
CAUTION: DO NOT use the Brio without the Base Tray.DO NOT touch the inside of the Base Tray, the Reversible Rack, or the Riser immediately after cooking. These parts will be hot. ONLY hold the Base Tray by the handle.Removing the Base Tray & Air Circulation Riser.
- Using the handle, pull the Base Tray straight out.
Allow the Base Tray to cool. Grasp the Circulation Riser by the central handle and pull it straight up to remove it from the Base Tray.
Allow the Base Tray to cool. Grasp the Circulation Riser by the central handle and pull it straight up to remove it from the Base Tray.
GENERAL USE INSTRUCTIONS
Getting Started
Plug the power cord into an electrical outlet.
- Press the Power button to turn the Brio on and off and to cancel.
- Insert your food into the Base Tray and slide it into the Brio.
- Adjust the temperature and time by pressing the Up and Down arrows.
- The default cooking time and temperature is 15-minutes at 350F.
- Press the START/PAUSE button to begin cooking.
Mute and unmute the beep sounds. To mute the beep sounds, press and hold the SEAR + STAGE buttons for 1 second. The Brio will remain mute until
Press SEAR + STAGE for 1 second again to unmute.
Adjust the cooking temperatures
- To set a different cooking temperature,press the Up and Down arrows above and below the temperature icon.
- The temperature will adjust in 5-degree increments between 50F and 400F.
- You can quickly adjust the temperatures by holding down the Up and Down arrows.
Note: The cooking temperature can be adjusted at any time before or during the cooking process. The current set temperature will be displayed. To display the time, press the TIME button.
- To set a different cooking temperature,press the Up and Down arrows above and below the temperature icon.
CLEANING & MAINTENANCE
Cleaning
Clean the Brio after every use or in between batches. The Base Tray and Air Circulation Riser have a non-stick coating.Do not use metal utensils or harsh abrasives when cleaning as these can damage the coating.
- Unplug the appliance and make sure it cools completely.
- Use a damp cloth to wipe the outside of the appliance.
- Clean the Base Tray and inside components with a nonabrasive sponge, hot water, and mild detergent.
Note: Remove the Base Tray and place it on a heat resistant surface to help cool the appliance faster. If using the dishwasher for the Base Tray, Air Circulation Riser, and Rack, use the top rack only.
Tip: If there is residual food on the Base Tray, Air Circulation Riser, and Rack, add some hot water and let them soak separately for about 10 minutes for easier cleaning. Then,use a soft cleaning brush to remove any lingering food.
IMPORTANT – Do not immerse the Brio in water or attempt to cycle the appliance through the dishwasher. The outer surface may be cleaned by wiping carefully with a damp dishcloth or sponge.
Cleaning Silicone Tabs
The Air Circulation Riser comes with 4 Silicone Tabs. You may need to clean the tabs as residue might accumulate.
- Let the Air Circulation Riser cool.
- Grasp the Air Circulation Riser by the central handle and pull it straight up to remove it from the Base Tray.
- Carefully pull the Silicone Tabs up to slide them off the metal tabs, then pull each of them out.
Note: Wash the Air Circulation Riser and Silicone Tabs with soapy warm water and sponge. The Air Circulation Riser can be washed in a dishwasher, top rack only. Do not wash the Silicone Tabs in the dishwasher. Wait for the Air Circulation Riser to completely cool off before washing.
TROUBLESHOOT GUIDE
The Brio is not turning on or working.
- The Brio is not plugged in.
- You did not press the Power button.
- The Base Tray is not in the Brio.
Insert the plug into an appropriate grounded power socket. Press the Power button. Place the Base Tray into the Brio.
The ingredients fried in the Base Tray are not completely cooked.
- Too many ingredients were used. The cooking temperature is too low.
- The cooking time is too short.
Remove some ingredients from the Base Tray; smaller batches air-fry more evenly. Cook at a higher temperature. Set the Brio to air-fry for a longer time.
The food is fried unevenly.
- Certain types of ingredients need to be shaken halfway through the cooking time.
Ingredients that are on the top need to be shaken halfway through the cooking time.
Fried snacks are not crispy when they come out of the Brio.
- You used a type of snack meant to be prepared in a traditional deep fryer.
Use snacks designed to be baked in a traditional oven, or lightly brush some olive oil onto the snacks before placing them into Brio for crispier results.
Cannot properly slide the Base Tray into the appliance.
The Base Tray is overfilled. Do not fill the Base Tray more than 4/5 full. Push the Base Tray into the Brio until you hear a click.
Storage
- Unplug the Brio and let it cool down completely.
- Make sure that all the parts are clean and dry.
- Push the power cord into the storage capsule. Affix the cord by inserting it into the cord-affixing opening in the back of the Brio.
IMPORTANT – Do not immerse the Brio in water or attempt to cycle the appliance through the dishwasher. The outer surface may be cleaned by wiping
carefully with a damp dishcloth or sponge.
LIMITED WARRANTY
The NuWave Brio® 7.25Q Digital Air Fryer THE MANUFACTURER WARRANTS The Brio, including the Base Tray, Air Circulation Riser, and Reversible Rack, are to be free from manufacturer defects. All electrical components are warrantied for 1 year from the date of purchase, under normal household use, and when operated in accordance with the Manufacturer’s written instructions. The Manufacturer will provide the necessary parts and labor to repair any part of the Brio at NuWave LLC Service Department. After the expiration of the warranty, the cost of the labor and parts will be the responsibility of the owner.
MANUFACTURER’S OBLIGATION
The Manufacturer’s obligation under this Limited Warranty is limited, to the extent allowable by law, to repairing or replacing any part covered by this Limited Warranty which upon examination is found to be defective under normal use. The Limited Warranty is applicable only within the continental United States and only to the original purchaser of the manufacturer’s authorized channels of distribution. THE LIMITED WARRANTY MAY NOT BE ALTERED, VARIED OR EXTENDED EXCEPT BY A WRITTEN INSTRUMENT EXECUTED BY THE MANUFACTURER. THE REMEDY OF REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS LIMITED WARRANTY IS EXCLUSIVE. IN NO EVENT SHALL THE MANUFACTURER BE LIABLE FOR ANY CONSEQUENTIAL OR INCIDENTAL DAMAGES TO ANY PERSON, WHETHER OR NOT OCCASIONED BY NEGLIGENCE OF THE MANUFACTURER, INCLUDING WITHOUT LIMITATION, DAMAGES FOR LOSS OF USE, COSTS OF SUBSTITUTION, PROPERTY DAMAGE, OR OTHER MONEY LOSS.
THE MANUFACTURER WARRANTS
he Manufacturer will provide the necessary parts and labor to repair any part of the Brio at NuWave LLC Service Department. After the expiration of the warranty, the cost of the labor and parts will be the responsibility of the owner.
