You are currently viewing Nuwave Pic Gold Induction Cooktop Owner Manual

Nuwave Pic Gold Induction Cooktop Owner Manual

nuwave-logo

Nuwave Pic Gold Induction Cooktop Owner Manual

Nuwave-Pic-Gold-Induction-Cooktop-Image-1

 

OPERATING INSTRUCTIONS

Nuwave-Pic-Gold-Induction-Cooktop-Image-2

 

  1. Ventilation: Air vents are located on the back of the product to allow any heat generated by the heating element to escape. This design feature prevents heat transfer to the cooking surface and ensures efficient performance of the NuWave PIC Pro Chef.
  2. Surface: The NuWave PIC Pro Chef’s heat-resistant glass surface stays cool to the touch and cleans easily with the simple wipe of a damp cloth.
  3. Control Panel with LED Display: Clearly lit, easy-to-read control panel.
  4. Heat Source: Electromagnetic coils located below the glass surface transfer generated heat directly to induction-ready cookware.

OPERATING INSTRUCTIONS (Continued)

IMPORTANT TIPS

  1.  Check power outlets to ensure proper operation. Do not use in an outlet where other major appliances are engaged. Check settings if the unit is
    cooking too slowly.
  2. The electrical plug must be properly plugged into the outlet.
    1. Do not block the ventilation slots of the induction cooktop. This may cause the unit to overheat. Maintain a minimum distance of 3-5 inches from walls and other objects, appliances, etc.
    2.  devices or objects that are sensitive to magnetic fields on top of or next to the NuWave PIC Pro Chef (e.g. credit cards, cellphones, radios,TVs, video recorders, etc.).
    3. The induction cooktop in the proximity of open fires, heaters or other heat sources do not use.
    4. Do not place on stovetop.
    5. Ensure that the power cable is not compressed beneath the induction cooktop.
    6.  The power cable must not come into contact with sharp edges and/or hot surfaces.
    7.  Prior to connecting the NuWave PIC Pro Chef, confirm that the voltage needs indicated in this manual correspond to the voltage supply in
      your home.
    8.  A wrong connection may lead to the property damage and possible injury.
    9. The cooktop’s surface is made from temperature-resistant glass.
    10.  In the event that damage to the unit is observed, even a small crack on the glass surface, immediately disconnect the NuWave PIC Pro Chef from the power supply.

Nuwave-PIC-Pro-Chef-image-2

Control Panel

“0” should appear when program is clear or power is on.

Wattage Function

The default wattage of the PIC Pro Chef is 1800 watts. To change the cook top’s wattage, press “Watts” once. The red light will illuminate above “900”, indicating that the PIC Pro Chef is now set to 900 watts. Press “Watts” once more and the red light above “1500” will illuminate, indicating the PIC Pro Chef is now set to 1500 watts. Press “Watts” again and the red light above “1800” will illuminate,indicating that the PIC Pro Chef is now set to the default 1800 watts.

Power & Temperature

Setting

Wattage Setting
900W

7.5 Amps

1500W

12.5 Amps

1800W

15 Amps

Sear900W1500W1800W
High (425F~560F)900W1500W1600W
Med/High (375F~420F)900W1300W1300W
Med (275F~370F)900W1000W1000W
Med/Low (175F~270F)600W600W600W
Low (100F~170F)600W600W600W

 

INDUCTION COOKTOP-COMPATIBLE COOKWARE

As induction technology is based on magnetic principles, compatible cookware must have a ferrous (iron-based, magnetic) bottom. Some types of cookware are made of naturally magnetic metals (such as pure iron), while others are rendered magnetic by “sandwiching” a thin layer of a ferrous metal within the base.This layer will be acted upon by the magnetic field of the induction cooktop to distribute heat. Tri-ply, high-quality stainless steel and cast-iron cookware will work with induction cooktops. Copper, glass, and aluminum cookware will not work unless they have a magnetic layer sandwiched in the base. Pots that function optimally with the NuWave PIC Pro Chef tend to be medium to heavy gauge.
ATTENTION
The heating surface is located inside the thicker silver ring. The minimum diameter of acceptable cookware is 3 inches. Always place cookware in the
center of heating center. You may use pans measuring up to the total width of the NuWave PIC Pro Chef, which measures 11.4 inches. However, in these
situations, heat will transfer more slowly to the outer edges. Not recommended for pans larger than 11 inches.
Examples of compatible cookware

  •  All NuWave Cookware
  •  Cast iron
  •  Enameled iron and steel
  •  Stainless steel with magnetic base

Non-induction-compatible cookware

  •  Copper
  • Glass
  • Aluminum

TROUBLESHOOTING

Error

Message

Solution
 

 

 

 

 

 

 

 

 

E1

An E1 reading typically means that your NuWave PIC Pro Chef does not detect cookware on its surface. This can occur for one of two reasons:

1. The induction coils contained within the NuWave PIC Pro Chef will only work when they are in direct contact with a piece of cookware. To maintain your appliance’s

effectiveness, always ensure that it rests on a flat surface

and that contact is consistent with your cookware.

2. An E1 message may also occur if your chosen cookware is not induction-ready.

 

If the PIC Pro Chef is locked and E1 appears:

• Simply unlock by pressing both “Prog” and “Low” and then press “Start” again.

• If you press, “Pause/Clear” twice, you will need to restart

the previous program.

E2 Contact customer service.The unit is malfunctioning
E3
E5 Contact customer service.The unit is malfunctioning.
E6The unit is malfunctioning. Contact customer service.
 

 

E7

Overheating, or air ventilation is obstructed. If internal temperature exceeds 230˚F, operation will cease and a “beep” noise will be produced. Press “Pause/Clear” twice. Wait for the unit to cool.
 

E8

Overheating, if unit exceeds a temperature 20˚F higher than

sear, the appliance will turn off. Contact customer service.

E9The unit is malfunctioning. Contact customer service.
 

FULL

In programming mode, when the  total  entered  time reaches the appliance’s

 

LIMITED WARRANTY

THE MANUFACTURER WARRANTS

The NuWave PIC Pro Chef, including the Base and all electrical components are warrantied for 1 year from the date of purchase, under normal household use, and when operated in accordance with the Manufacturer’s written instructions.The Manufacturer will provide the necessary parts and labor to repair any part of the NuWave PIC Pro Chef at the NuWave, LLC Service Department. After the expiration of the warranty, the cost of the labor and parts will be the responsibility of the owner.

THE WARRANTY DOES NOT COVER

The  voided if repairs are made by an unauthorized dealer and/or the serial number data plate is removed and/or defaced. Normal deterioration of finish due to use or exposure is not covered by this Warranty. This Limited Warranty does not cover failure, damages or inadequate performance due to accident, acts of God (such as lightning), fluctuations in electric power, alterations, abuse, misuse, misapplications, corrosive-type atmospheres, improper installation, failure to operate in accordance with the Manufacturer’s written instructions, and abnormal use or commercial use. NuWave,LLC reserves the right to void the Limited Warranty, where allowable by law, for products from an unauthorized dealer.

TO OBTAIN SERVICE

The owner shall have the obligation and responsibility to: pay for all services and parts not covered by the warranty; prepay the freight to and from Service Department for any part or system returned under this warranty; and carefully package the product using adequate padding material to prevent damage in transit. The original container is ideal for this purpose. Include in the package the owner’s name, address,daytime telephone number, a detailed description of the problem, and your “RGA number.” Call 1-877-689-2838 or email help@nuwavenow.com to obtain the RGA number (Return Goods Authorization number). Provide the cooking system model & serial number and proof of date of purchase (a copy of the receipt) when making
claims under this warranty.

Nuwave-PIC-Pro-Chef-image-3

Omelet Serves

The ingredient

  • 2-3 eggs
  • 1 tablespoon cold water
  • Salt and pepper to taste
  • 1 tablespoon butter

 The Directions:

  1. Whisk eggs in bowl with salt, pepper, and cold water.
  2.  Heat small sauté pan on High (425˚F). Add butter and cook until butter starts to melt.
  3. Reduce heat to Medium (275˚F) and add egg mixture all at once.
  4.  Swirl with rubber spatula and cook eggs until almost set.
  5.  Occasionally tilt pan and lift and fold partially cooked egg mixture so that uncooked portion flows underneath.
  6. Using spatula, fold the omelet in half or into thirds.
  7. Flip over onto plate to serve.

Nuwave-PIC-Pro-Chef-image-4

Garden Vegetable Frittata

Ingredients:

  • 2 tablespoons olive oil
  • 6 small red potatoes, sliced
  • 2 cups torn fresh spinach
  • 1 bunch green onions, sliced
  • grape tomatoes, sliced 1 cup
  • 1 cup asparagus, diced
  • 1 teaspoon crushed garlic
  • Salt and pepper to taste
  • 6 eggs
  • ½ cup milk
  •  shredded Asiago cheese 1 cup

Directions:

  1. Heat olive oil in medium sauté pan on Medium (275˚F).
  2.  Add potatoes to pan, cover and cook for 6-8 minutes.
  3.  Uncover pan and mix in spinach, green onions, tomatoes, asparagus,and garlic.
  4.  Season vegetables with salt and pepper and cook for 1-2 minutes, until spinach is wilted.
  5. In separate bowl, beat eggs and milk together and pour into sauté pan.
  6.  Sprinkle eggs with cheese and reduce PIC to Low (120˚F).
  7.  Cover pan and cook for 5-7 minutes.

WARRANTS

THE MANUFACTURER WARRANTS

The induction cooktop and all electrical components to be free from defects and workmanship under normal household use, when operated in accordance with the Manufacturer’s written instructions provided with each unit for one (1) year from date of purchase. The Manufacturer will provide the necessary parts and labor to repair any part of the induction cooking system at NuWave, LLC Service Department. After the expiration of the warranty, the cost of the labor and parts will be the responsibility of the owner.

THE WARRANTY DOES NOT COVER

Any coating (if applicable) on any part of the cooking system. The Limited Warranty is voided if repairs are made by an unauthorized dealer or the serial number data plate is removed or defaced. Normal deterioration of finish due to use or exposure is not covered by this Warranty. This Limited Warranty does not cover shipping costs, failure, damages or inadequate performance due to accident, acts of God (such as lightning), fluctuations in electric power, alterations, abuse, misuse, misapplications, corrosive type atmospheres, improper installation, failure to operate in accordance with the Manufacturer’s written instructions, abnormal use or commercial use.

TO OBTAIN SERVICE

The owner shall have the obligation and responsibility to: pay for all services and parts not covered by the warranty; prepay the freight to and from Service Department for any part or system returned under this warranty; carefully package the product using adequate padding material to prevent damage in transit.

The original container is ideal for this purpose. Include in the package: owner’s name, address, daytime telephone number, a detailed description of the problem, and your RETURN GOODS AUTHORIZATION NUMBER (RGA number): Call 1-877-689-2838 or e-mail help@nuwavenow.com to obtain the RGA number. Provide the cooking system model & serial number and proof of date of purchase (a copy of the receipt) when making claims under this warranty

REFERENCE

https://www.nuwavenow.com/

DOWNLOAD PDF

Nuwave Pic Gold Induction Cooktop Owner Manual

Leave a Reply