Table of contents
show
Origin-Storage OSFDTAG195WL-P Screen Protector User Guide
Origin Anti Glare Display Film
Preparation:
- Thorough Cleaning: Ensure your screen is free of dust, grease, or any other residues. Use a lint-free microfiber cloth and a suitable screen cleaning solution (avoid harsh chemicals or abrasives).
Application: - Protective Film Removal: Carefully detach the protective film from the adhesive side of the display filter. Handle the film by the edges to avoid leaving fingerprints.
- Alignment and Placement: Gently position the filter onto the screen, aligning it precisely with the edges. Start from one corner and progressively smooth the film across the surface, eliminating any air bubbles.
- Adhesive Bonding: Press the filter borders firmly to establish a secure adhesion with the screen. Use a soft cloth to apply consistent pressure and ensure a seamless bond.
- Verification and Adjustment: Inspect the filter for proper alignment and adhesion. If any imperfections or air bubbles are present, carefully peel back the affected area, reposition the filter, and re-adhere as needed.
Disclaimer:
Please note that Origin assumes no responsibility for damage or improper application resulting from user error.
Additional Tips:
- Consider applying the filter in a well-lit environment to facilitate precise alignment.
- If necessary, use a squeegee or credit card to gently smooth out any remaining air bubbles.
- Avoid touching the adhesive side of the filter with your fingers.
By following these steps and taking proper precautions, you can successfully apply the Origin Anti-Glare Display Film and enjoy optimal viewing clarity and glare reduction.
Origin Security Filter with adhesive stripes
- Contents of package
- Remove the adhesive strip from the filter carefully
- Attach the adhesive strip on the backside of the filter close to the edge
- Remove the protective foil from the attached adhesive strip
- Attach the filter centrally on the screen.
Cleaning of the adhesive layer of the privacy filter:
Cleaning of the adhesive strip: rinse under water and rub gently to remove dirt. Use the wipe provided to dry.
No liability is accented for improver handling!
