Origin-Storage OSFTAG123L Screen Protector User Manual

Origin-Storage OSFTAG123L Screen Protector User Manual

Origin Anti Glare Display Film

1. Clean your screen diligently (no dust or grease)
2. Display protection film
3. Remove protective film from filter
4. Arrange filter and attach the borders of screen
5. If you are not happy with the result, repeat procedure. No liability is accepted for improper handling!

Origin Security Filter with adhesive stripes

1. Contents of package
2. Remove the adhesive strip from the filter carefully
3. Attach the adhesive strip on the backside of the filter close to the edge
4. Remove the protective foil from the attached adhesive strip
5. Attach the filter centrally on the screen

Cleaning of adhesive layer of privacy filter:
Cleaning of adhesive strip: rinse under water and rub gently to remove dirt. Use wipe provided to dry.

Origin Security Filter with plastic holders

1. Contents of package
2. Remove the film from the adhesive corners
3. Attach the adhesive corners on the frame of the screen close to the ridge
4. Position the adhesive corners according to need and size of screen
5. Slide the privacy filter with the matter or shiny side between support and screen.

Origin Security Filter 2 / 4 ways

1. Clean your screen ensure you remove all dust and grease marks
2. Filter
3. Remove protective film from Security filter
4. Arrange filter and attach to the borders of screen
5. If you are not happy with the result, repeat procedure. No liability is accepted for improper installation!

Cleaning of adhesive layer of privacy filter:
Cleaning of adhesive stripe: rinse under water and rub gently to remove dirt. Use a paper towel to dry

REFERENCE LINK

https://www.originstorage.com/