Polaris 9650iQ Pressure-Side Pool Vacuum User Manual
Assemble the Caddy
Connect Floating Cable
Never turn on the cleaner unless it is fully submerged in the water. Doing so will void the warranty and may cause severe damage to the cleaner motors.
Submerge Robotic Cleaner in Pool
Wait for the bubbles to stop completely, then let the cleaner sink to the bottom of the pool.
Control Unit
Before you begin installation, make sure you have the following:
Robotic Cleaner submerged in the pool. The Control Unit is connected and plugged into a GFCI outlet. WI-FI enabled smart device (phone or tablet) Wi-FI router with sufficient signal strength at the Control Box IMPORTANT. Have your WI-FI network password available.
Configure the System
- Press (+) on the My Systems page.
- Select Robotic Cleaner.
- Choose Wi-Fi to Phone.
- On the Control Unit, press the Wi-Fi to Phone button (see illustration).
- Follow on-screen prompts to view Wi-Fi Networks and select “RoboticCleaner-..
- Choose your Time Zone and Pool Shape.
- Next, choose your home router from the list of found Wi-Fi networks. Enter password.
- Add to My Systems and/or edit the system name.
- Select Primary User to invite or remove people from accessing the cleaner app.
- Send Invite Codes to friends/family if desired.
¡AquaLink™ Control|
Home screen
Proper Removal from Pool
- Use the lift System from the Main app screen or the Control Unit to drive the cleaner to the nearest wall.
Never lift the cleaner out of the pool by the floating cable.
Unplug & Untangle
Clean the Filter Canister
- Remove
- Empty
- Rinse
REFERENCE LINK
https://www.polarispool.com/en/products/pool-cleaners/robotic-pool-cleaners/polaris-9650iq-sport
