Polaris Scout-42iQ Robotic Pool Cleaner User Manual
Before You Start
This Quick Start Guide contains essential installation and startup instructions. Read the complete manual and all safety warnings before commencing installation.
Contents
Connect the Floating Cable
Do not use an extension cord. Never turn on the cleaner unless it is fully submerged in the water. Doing so may void the warranty and may cause severe damage to the cleaner motors.
Submerge Robotic Cleaner in Pool
Wait for the bubbles to stop completely, then let the cleaner sink to the bottom of the pool.
The ideal entry point in the pool.
Start Cleaning
To set up models with app control – please go to the “Install iAquaLink” section.
Proper Removal from Pool
NOTE: Never lift the cleaner out of the pool by the floating cable.
- A. Activate the Lift System (not available on all models) or gently pull the cable until the cleaner is within reach.
- B. Remove the cleaner from the pool using the handle.
- C. Unplug & Untangle.
- D. Clean the Filter Canister.
- Remove
- Empty
- Rinse
Install the App and Add Your Cleaner Optional.
Not available on all models
Install the App and Add Your Cleaner Optional.
- Robotic Cleaner submerged in the pool.
- Control Box connected and plugged into a GFCI outlet.
- Wi-Fi and Bluetooth-enabled smart device (phone or tablet).
- Wi-Fi router with sufficient signal strength at the Control Box.
- IMPORTANT: Have your Wi-Fi network password available.
If you have problems connecting, the Wi-Fi signal may not be strong enough next to the pool. Try placing the Control Box in another location closer to your home router.
After logging into the iAquaLink® app, press the plus icon (+) at the top of My Systems.
When prompted, press the connect button on the Control Box to begin pairing.
Bluetooth® light indicates status: BLINKING – searching for signal SOLID – paired with the phone.
Follow the on-screen prompts to connect to Wi-Fi. Wi-Fi light
indicates status: BLINKING – connected to router SOLID – connected to the internet.
After logging into the iAquaLink® app, press the plus icon (+) at the top of My Systems.
When prompted, press the connect button on the Control Box to begin pairing.
Bluetooth® light indicates status: BLINKING – searching for signal SOLID – paired with the phone.
Follow the on-screen prompts to connect to Wi-Fi. Wi-Fi light
indicates status: BLINKING – connected to router SOLID – connected to the internet.Control Box Button Overview
Start/Stop cleaning.
Select cleaning mode.
Start/Stop cleaning.
Select cleaning mode.Zodiac Pool Systems LLC
- 2882 Whiptail Loop # 100
- Carlsbad, CA 92010, USA
- PolarisPool.com | 1.800.822.7933
Zodiac Pool Systems Canada, Inc.
- 2-3365 Mainway
- Burlington, ON L7M 1A6, Canada
- PolarisPool.ca | 1.800.822.7933
A Fluidra Brand
©2023 Zodiac Pool Systems LLC. All rights reserved. Polaris® and the Polaris 3-wheeled cleaner design are registered trademarks of Zodiac Pool Systems LLC. Apple and the Apple logo are trademarks of Apple, Inc., registered in the U.S. and other countries. AppStore is a service mark of Apple, Inc., registered in the U.S. and other countries. Google Play and the Google Play logo are trademarks of Google LLC. All other trademarks referenced herein are the property of their respective owners. Read the complete manual found in the box or available on our website for additional operating and troubleshooting instructions.
REFERENCE LINK
https://www.polarispool.com/en/products/pool-cleaners/robotic-pool-cleaners/polaris-scout-42iq
