Table of contents
show
MegaWise Premium Kitchen Scale User Manual
FOREWORD
In order to let you know and use the product better, and to ensure the accuracy of weighing and extend the life of the scale, please read this manual carefully before use If there is anything you don’t understand, you can always consult, thank you for your cooperation!
BASIC PRODUCT FEATURES
- This product uses high-precision sensors and a high-performance CPU, accurate and reliable weighing.
- LCD blue background showing white words
- Overload prompt, automatic shutdown, hold reading function, etc.
- With the unit transfer switch
- Super tempered glass panel support.
TECHNICAL PARAMETERS AND IMPLEMENTATION STANDARDS
- Product Name: Kitchen Scale
- Weighing range: 3g—-15000g
- Product model: K7H
- Accuracy: 1g
- Power supply mode: 2 × 1.5V AAA
- Product error: ‡ 2%+1g
- Notice:
- USB output voltage and current.
- Voltage:5V /Current:1A
BATTERY INSTALLATION METHOD
The kitchen scale contains a built-in battery, When the battery runs out, you can use a 2 AAA battery or a USB cable to charge it.
DISPLAY DESCRIPTION
KEY FUNCTION
- “ON/OFF” button: It can be turned on and off. In the off state, press the “ON/OFF” button to turn it on. In the power-on state, press and hold the “ON/OFF” button to turn it off.
- “TARE” button: Place the carrier under the scale body (if there is a carrier tray), and press the “TARE” button to perform the tare operation. The scale can be weighted after the zero is displayed.
- “UNIT” button: This product has a variety of units for users to choose from, Press: the “UNIT” button for cycle selection.
WEIGHING INSTRUCTIONS
- Place the product on a hard horizontal surface.
- Place the carrier on the scale.
- Press the “ON/OFF” button to turn it on. After powering on, press “ON/OFF” to turn it off.
- Wait for the display to display ” before you can start weighing. Press the “UNIT” button to perform unit conversion. Specifically, there are five conversion units as follows.
- Tare function: The object is placed on the scale body (or on the load plate) for weighing, and the LCD screen will display the weight of the object. If the container is placed on the glass table, the LCD will display the weight of the container. Press the “TARE” button to peel the skin, The LCD will enter a clear state, and the object to be weighed will be placed in the container. The LCD display is the weight of the chair.
USE SUGGESTIONS
- Display “Er” means that the maximum weighing weight is exceeded.
- The “LO-” flashing indicates that the battery is low. Please replace the battery in time
PRECAUTIONS
- Place the scale on a clean, level surface during use.
- The weighing scale of the scale is 15000g maximum, including the weight before peeling.
- Do not use this product in a humid, hot, cold place.
- This product belongs to high-precision electronic products. Please do not press hard on the scale body to prevent falling damage when moving.
- This product is only for household weighing items, and should not be used for commercial settlement, measurement, etc.
- When there is a smudge on the scale of the product, wipe it with a soft cloth, do not use chemical reagents, and prevent water from entering the scale body.
- Please remove the battery when not in use for a long time.
- When the LCD display shows “LO”, the battery is too low. Please replace the battery in time.
- When the LCD display shows “Err”, the item is overweight. Please remove the item in time to avoid damage to the product (the maximum range of the product is 15000g)
AUTOMATIC SHUT-DOWN
The product will automatically shut down if there is no button operation or the weight changes within about 2 minutes.
