Ozeri ZB22 ProMax Digital Bathroom Scale Manual
Warnings
- Your Ozeri Precision Digital Bathroom Scale is a finely tuned electronic instrument. One of the hardest things to weigh is the human body because there is always subtle motion. To ensure reliable readings,
always try to place your feet on the scale in the same place each time and remain still. - Your scale will auto-calibrate once before first use and after each time the scale detects that it has been picked up or moved to another location.As part of this calibration process, please disregard the first weight
reading. Step off the scale and allow it to turn off. This will complete the calibration process. - Note that your body weight will vary based on hydration, clothing and other factors. This scale rounds to the nearest 100 grams. When slight variances occur, it is recommended to average your weight over time.
SELECTING YOUR UNIT OF MEASUREMENT
The UNIT button is located on the left side of the scale. Simply press the UNIT button repeatedly until the unit of measure you desire appears on the screen.
OPERATING INSTRUCTIONS
- Ensure there is nothing on the scale’s weighing platform.
- Press ON/OFF/TARE to turn on the scale.
- Press the UNIT button to select your desired unit of measurement.
- Place your item(s) onto the scale’s weighing platform.
- The weight will immediately display on the LCD screen.
Note 1: Be sure to gently place items on the scale’s weighing platform.If item being weighed is uneven, the scale may take 2 or 3 seconds items from the scale. To avoid damaging the scale’s sensors, do not leave an item on the scale’s weighing platform for an extended period of time.
Note 2: The maximum weight capacity of this scale is 8000 g. If the weight capacity of this scale is exceeded, the Overload Indicator will display on the LCD screen:
USING THE TARE FEATURE:
The Tare button is located on the right side of the scale. The Tare feature allows you to automatically subtract the weight of a bowl or plate and determine the net weight of the ingredients being weighed.The Tare feature works by resetting the LCD screen to zero with an item (bowl, plate or other) already on the scale so that you can then
determine the weight of any additional items added.
- Ensure there is nothing on the scale’s weighing platform.
- Press ON/OFF to turn on the scale.
- Press the UNIT button to select your desired unit of measurement.
- Place your empty bowl, plate or dish onto the scale’s weighing platform, and wait for the weight to display on the LCD screen.
- Press the Tare button once to reset the scale to zero on the LCD screen.
- Add your items (such as ingredients).
- The net weight of your added items will display on the LCD screen.
CHANGING THE BATTERIES
- Ensure +/- terminals are correctly oriented.
- Please use a small tool to help remove the battery from the battery compartment if necessary.
- Replace with new 2 Lithium CR2032 batteries, with the + side facing up.
- Do not mix old and new batteries.
SPECIFICATIONS
- Features Microban® antimicrobial product protection that helps prevent the growth of stain and odor-causing bacteria.
- Equipped with 4 high precision Sensors
- Weight Unit: g, fl.oz, lb:oz, ml
- Capacity: 8000 g, 271.20 fl.oz, 18 lbs, 8000 ml
- Graduation: 1 g, 0.05 fl.oz, 0.05 oz, 1 ml
- Power Supply: 2 x CR2032 Lithium batteries (included)
- Low Battery Indicator:
- Overload Indicator: “ ”
- Automatically turns off after 2 minutes of inactivity.
LCD FULL DISPLAY
TO TURN ON/OFF
- Press and hold the ON/OFF/TARE button for 2 seconds to turn off the scale.
- Press and hold the ON/OFF/TARE button for 2 seconds to turn off the scale.
