PULSAR V455 Axial Mini eNail Kit User Manual
Important Safety Warnings
Please allow the full cool down time between cycles or cleaning. Pulsar Elite Series eNails and accessories are intended for adults only. Do not sell, provide, or allow access to minors. Keep all parts, concentrates, herbs, and liquids away from children and pets. Pulsar products are not medical devices and are not intended to diagnose, treat, mitigate, cure or prevent any ailment, disease, or other conditions. Failure to follow any of these instructions could result in product damage, property damage, or personal Injury
This Kit Includes
- Pulsar Elite Series Axial Mini eNail Power and Temperature Control Box with Digital Screen
- Accommodates 25mm Nails
- 5ft. Removable Power Cord
- 4ft. Heating Coil Cord
- Quartz/Titanium Hybrid Nail
- Titanium Carb Cap
- 2 Silicone Stability Rings
Technical Specifications
- Digital Display with Push Button Controls
- Rear On/Off Switch
- Temperature: 0°F-1200°F
- Voltage: 90-150v
- Power: 150w
Set-Up
Unscrew your chosen bucket from the hybrid nail; insert into the Axial coil and reassemble the hybrid nail. Plug the coiled heater into the control box. Plug power cord into the control box and connect to a power outlet. Carefully fit and insert nail into chosen glass concentrate rig.Press the power switch on the back of the control box to turn the unit ON/OFF.
How to Set Temperature
Use the up and down arrows to set the desired temperature. Unit has a range of 0°F to 1200°F. Hold the button down to increase number changing speed. The numbers will flash ten times indicating desired temperature is set. Place desired concentrate onto the unit and inhale gently, cover the nail with provided carb cap as needed.
Limited Warranty
This limited warranty protects against manufacturer defect under normal use and does not apply to normal wear & tear; Improper use; accidental a result of defective materials or workmanship. If your Pulsar Elite Series qualifies for servicing, we will repair or replace, at our discretion and expense, any defective parts or materials.
